Aggressive Link Power Management
 | This article needs additional citations for verification. (March 2013) |
Aggressive Link Power Management (ALPM) is a power management protocol for Advanced Host Controller Interface-compliant (AHCI) Serial ATA (SATA) devices, such as hard disk drives and solid-state drives.[1]
Description[]
When enabled via the AHCI controller, this allows the SATA host bus adapter to enter a low-power state during periods of inactivity, thus saving energy. The drawback to this is increased periodic latency as the drive must be re-activated and brought back on-line before it can be used, and this will often appear as a delay to the end-user.
States[]
There are three states:[2]
- Active
- Low Power with two internal states Partial and Slumber. Partial has a maximum return latency of 10 microseconds while slumber has a maximum latency of 10 milliseconds. Hot swapping is disabled.
- Device Sleep with a maximum return latency of 20 milliseconds unless otherwise specified in Identify Data Log
These can be selected by the SATA AHCI driver, usually via a configuration option. Hot swapping is disabled.
See also[]
References[]
- ^ "Serial ATA AHCI: Specification, Rev. 1.3". Intel. Retrieved 31 October 2012.
- ^ "Designing Energy Efficient SATA Devices" (PDF). Intel. Retrieved 31 October 2012.
External links[]
 | This computer hardware article is a stub. You can help Wikipedia by . |
- Computer hardware tuning
- Serial buses
- Serial ATA
- Computer hardware stubs