Amalgamated Drawing Office

The Amalgamated Drawing Office was the design and engineering department of the British Motor Corporation. From the early 1950s, the resulting projects of the office were known by the initials ADO. The numbers were assigned to vehicle and engineering projects, some resulting in production models. The ADO numbering system continued well beyond BMC's absorption into British Leyland, who continued to use the convention (not, however on any former Leyland Motors marques such as Rover or Triumph) until the late 1970s.

Contrary to popular belief, ADO does not stand for Austin Drawing Office,^[1] the "amalgamation" referring back to the merger of Austin and Morris to form BMC in 1952.

ADO project numbers[]

• ADO6 Austin FX4 Taxi^[2]
• ADO8 Austin A40 Farina MkI
• ADO9 BMC Farina "B" models: Austin A55 Cambridge MkII, Morris Oxford Series V, MG Magnette MkIII, Riley 4/68, Wolseley 15/60
• ADO10 BMC Farina "C" models: Austin Westminster, Wolseley 6/99
• ADO11 475cc 2-cylinder A-Series engine that never reached production, essentially half a 948cc A-Series.^[3]
• ADO12 Hydrostatic transmission, installed in an Austin A35 prototype
• ADO13 Austin-Healey Sprite
• ADO14 Austin Maxi
• ADO15 Mini MkI and MkII (except Cooper versions), Riley Elf, Wolseley Hornet; renamed from project XC9003
• ADO16 1100/1300;^[4] renamed from project XC9002
• ADO17 Austin 1800 & 2200, Morris 1800 & 2200, Wolseley 18/85 & Six; renamed from project XC9005
• ADO19 Austin Ant, cancelled as it would interfere with Land Rover sales
• ADO20 Mini MkIII and Clubman
• ADO21 Mid-engined MG sports car to replace the MGB, cancelled in favor of the Triumph TR7^[5]
• ADO22 Proposed replacement for the Austin 1100,^[6] cancelled and replaced by the ADO67
• ADO23 MGB
• ADO24 Austin-Healey 4000 prototype, cancelled
• ADO25 BMC E-series engine 6-cylinder
• ADO26 Austin Healey 3000 MkIII
• ADO27 Austin Tasman / Austin Kimberley
• ADO28 Morris Marina
• ADO30 BMC Fireball XL5,^[7] a proposed replacement for the Austin-Healey 3000, but cancelled as it would have competed with the Jaguar E-type
• ADO31 MGA 1600
• ADO32 BMC E-Series engine 4-cylinder
• ADO34 Mini-based 2 seat roadster proposed as a MG Midget and Austin-Healey Sprite replacement; two versions of ADO34 were built: one by Austin at Longbridge and the other by MG at Abington. The Longbridge car was built (and probably styled) by Pininfarina, while the Abington car looked like a shrunken MGB.^[8]
• ADO35 Coupe version of the Austin-built ADO34
• ADO36 Austin-Healey versions of ADO34 and ADO35, based on the MG-built ADO34
• ADO37 Vanden Plas Princess 3 litre
• ADO38 BMC 1600 Farina range Riley 4/72, Morris Oxford Farina, Wolseley 16/60, Magnette MkIV
• ADO39 Proposed FX4 Taxi replacement
• ADO40 Wolseley 24/80
• ADO41 Austin-Healey Sprite MkII
• ADO44 Austin A40 Farina MkII
• ADO46 Farina B-Series diesel models
• ADO47 MG Midget MkI
• ADO49 Farina B-series pickup truck based on Riley 4; built and sold in Argentina
• ADO50 Mini Cooper and Cooper S
• ADO51 Austin-Healey 3000 MkIV, a rebadged MGC
• ADO52 MGC
• ADO53 Austin A110 Westminster
• ADO56 MG Sports project^[9]
• ADO58 Joint BMC/Rolls-Royce/Bentley coupe project^[10]
• ADO59 Morris Minor 1000
• ADO61 Austin 3-Litre
• ADO66 Vanden Plas Princess 4-litre R
• ADO67 Austin Allegro
• ADO68 "Project Condor" sports car project^[11]
• ADO69 Proposed FX4 Taxi replacement, cancelled
• ADO70 Calypso, a Michelotti-built, Mini-based front drive replacement for the MG Midget^[12]
• ADO71 Austin/Morris 18-22/Princess
• ADO73 Morris Marina Series 2
• ADO73 F/L Morris Ital
• ADO74 Concept supermini model as a possible Mini replacement,^[13][14] cancelled in 1974
• ADO75 MGB GT V8
• ADO76 Proposed revised MGB resulting in the rubber-bumper model^[15]
• ADO77 Proposed second generation Morris Marina that never reached production^[16] and due to a lack of funding, was merged with the Rover SD2 project in 1975 to form the Triumph TM1
• ADO88 Supermini, cancelled due to unfavorable reviews from customer clinics; became project LC8 and then Mini Metro^[17]
• ADO99 Proposed replacement for the Allegro; became project LC10, then LM10 and finally Austin Maestro

Post ADO project codes[]

Various conventions were used from the early 1970s within British Leyland and subsequently the Rover Group, even though the Austin-Morris division of BL continued to use the ADO convention until the company's collapse and subsequent Ryder Report restructuring in 1975.

Specialist Division codes[]

The Specialist Division encompassed Rover and Triumph. Only four projects were ever pursued during its existence before the division was renamed Jaguar Rover Triumph, and integrated within Leyland Cars in 1976.

• SD1 Rover 3500/2300/2600, Rover P6 replacement, launched in 1976. The "Rover SD1" name entered the public domain as an umbrella term for this whole model series, even though it was never officially used in the marketing of the cars.
• SD2 Proposed Triumph Dolomite replacement, was abandoned in 1975 for the ADO77 studies.
• SD3 Rover 213/216 - the SD3 code was used for the 1984 Triumph Acclaim replacement, even though the Specialist Division itself had long been disbanded within BL, and Rover was now part of the Austin Rover Group, therefore logically the LC or AR convention would have been used.
• SD5 Proposed Land Rover replacement (1974)^[18]
• TM1 Joint replacement for the Triumph Dolomite/Sprint and the Morris Marina. This superseded the cancelled SD2 and ADO77 projects, but this too was scrapped and replaced by the LM10 and LM11 (Austin Maestro/Montego).

LC/LM/AR codes[]

Following the various reorganisations of BMC, and the creation of the combined Leyland Cars division of British Leyland, the codes changed to LC in the mid 1970s.^[19] Following the merger of Rover's Specialist Division SD codes, these resulted in LM (Light Medium) codes.

• LC8 Austin Metro, referred to as ADO88 in early development
• LC9 Triumph Acclaim, also referred to as "Project Bounty" during early development.
• LC10 Austin Maestro, later becoming LM10, referred to as ADO99 in early development.
• LC40 Jaguar XJ40 used this designation during 1977, reverted to XJ40 for 1978
• LM11 Austin Montego,^[20] referred to as LC11 in early development
• LM12 Proposed coupe version of Maestro, cancelled
• LM14 Proposed hatchback derivative of the Montego which would have been a direct replacement for the Princess, cancelled in favour of LM19
• LM15 Proposed replacement for the Rover SD1; dropped in favor of Project XX and eventually the Rover 800^[21]
• LM19 Austin Ambassador, major facelift and hatchback conversion of ADO71 (Princess) released in 1982.

There was also a short lived "AR" code following the renaming of BL Cars Ltd to Austin Rover in 1982. Most of the AR-designated projects were either abandoned or were renamed using the Rxx convention (see below)

• AR5 Proposed replacement for the Rover 213/216. Scheduled for a 1989 release, but was cancelled in favor of the AR8.
• AR6 Austin Metro replacement - was scaled back in scope and became the R6 Rover Metro program, launched in 1990.
• AR7 Austin Maestro replacement - scheduled for a 1990 release, but cancelled in 1985 and replaced by the AR8.
• AR8 Proposed replacement for the Rover 214/216. Evolved into the R8 Rover 200-series in 1988.
• AR9 Austin Montego facelift. Launched in mid-1988. This was the only AR- designated project to make it into production.
• AR16 A reskinned Austin Montego with new exterior panels to continue the styling language of the Rover 800, along with a five-door hatchback variant designated as AR17. Planned for a 1988-1989 launch, but was abandoned in favor of the "Syncro" project - which became the Rover 600.^[22]

R codes & others used by the Rover Group[]

After British Leyland (now BL plc) was renamed Rover Group and its subsequent re-privatisation and sale to British Aerospace (and later, BMW), project codes in the 'Rxx format were generally used, although some projects were given alternative designations or sometimes names. Projects in this series were not numbered consecutively, unlike the earlier conventions. Some Rxx codes continued within the new MINI division of BMW after the 2000 break-up of the Rover Group, until MINI later switched to BMW's project numbering convention. The later RD code was used for projects undertaken by MG Rover from 2000 onward, to that company's collapse in 2005.

R and RD codes[]

• R3 Series III Rover 200/25 (1995-2005)
• R6 Rover Metro/100 (1990-1997) Was originally AR6, which would have been an all-new Metro replacement - R6 ended up becoming a major facelift and re-engineering of the original 1980 Austin Metro (ADO88/LC8)
• R6X Alternative styling proposal for R6.
• R7 Hatchback based on shortened R8 platform, styling taken from the R6X.
• R8 Series II Rover 200/400 (1989-1995) Was initially known as "YY" (after the original Rover 800's "XX" designator) and AR8.
• R9 Sedan based on the R8. Cancelled in favor of a Rover version of the Honda Concerto.
• R17 Rover 800 MkII hatchback (1992-1998)
• R18 Rover 800 MkII sedan
• R30 Rover 25/45 replacement. Proposed for a 2002-03 launch, but was abandoned following the sale and break-up of the Rover Group by BMW.
• R40 Rover 75 (1998-2005)
• R50 Mini Hatch - Several Rxx codes were carried over following the spin-off of Mini into BMW ownership.
• R52 Mini Convertible
• R53 Mini Cooper S
• R55 Mini Clubman
• R56 Mini Hatch second generation
• R57 Mini Convertible second generation
• R58 Coupe
• R59 Roadster
• R60 Mini Countryman
• R61 Mini Paceman
• RD60 (later RDX60) Mid-range saloon positioned below the Rover 75, but was abandoned following MG Rover's collapse in 2005.
• RD110 Rover CityRover (2003-2005)

Others[]

• 100-inch station wagon Range Rover (1970) The project also used the name VELAR for registering road going prototypes.
• Adder MG RV8 (1992-1995)
• Core early proposals for Rover 600 replacement, merged with Eric and Flagship to become Isis then RD1 and the Rover 75^[23]
• Eric early proposals for Rover 800 Coupe (1993)
• Flasgship early plans to replace the Rover 800 (1993)
• HH-R Rover 400/45 (1995-2005) Also known as "Theta" during its development
• Pathfinder An aborted recreational vehicle which would have carried Rover branding. This ultimately evolved into the CB14 project Land Rover Freelander
• PR1/PR2/PR3 These projects would ultimately evolve into the MG F
• Project Jay Land Rover Discovery Series I (1989)
• Project Jewel Rover 200 to 25 facelift (1999)
• P38A Range Rover Mk2 (1994) Also known as "Pegasus" or simply P38.
• Syncro Rover 600 (1993-1998)
• X10 MG ZT
• X11 MG ZT Tourer
• X20 MG ZS
• X30 MG ZR
• XX Rover 800 Mk.1 and Sterling (1986-1992), initially known as HD17. The corresponding Honda sister car, the Legend was designated "HX"
• YY Rover 214/216. Renamed AR8 in 1986. The Honda version, the Concerto, was designated "HY"

From late 1993, Richard Woolley had already been working on three models to replace the 800 and 600. The first, called ‘Flagship’ (and nicknamed ‘Flashpig’) would replace the 800, the second, called ‘Eric’ was a replacement for the 800 Coupe and the third, called ‘Core’, would replace the 600. Basically, these new cars were conceived to evolve the look pioneered in the 600 – but move in a direction more suited to Rover’s traditional styling cues.

Other codes[]

The Australian division used YD codes from 1962 to identify their projects.

References[]