Anchor bend
Anchor bend | |
---|---|
![]() | |
Names | Anchor bend, Fisherman's Bend |
Category | Hitch |
Related | Round turn and two half hitches |
Releasing | Jamming |
Typical use | attaching a rope to a ring or similar termination |
ABoK | #1723, #1841 |
The anchor bend is a knot used for attaching a rope to a ring or similar termination. The name is a misnomer, as it is technically not a bend, but a hitch.
Origins[]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/4f/Beowulf_-_oncear_bendum.jpg/220px-Beowulf_-_oncear_bendum.jpg)
Its name originates from the time when "bend" was understood to simply mean "tie to"; today, a bend strictly refers to a knot that joins two lines.
Techniques[]
While the knot can become jammed in some modern materials, it is usually easily untied after moderate loads; it can be made more resistant to jamming by taking an extra turn around the object--this will make for a 1-diameter longer span of the end to reach around the standing part to be tucked (although in a case of tying to a small shackle or link of a chain, this might not be possible). It is the accepted knot for attaching anchors (or more usually anchor chains) to warps. The knot is very similar to a round turn and two half hitches except that the first half hitch is passed under the turn. In many everyday uses, the finishing half-hitch need not be made; alternatively, one might seek surer security by tying off the end with a strangle knot to the standing part.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a9/AnchorBend_HowTo.jpg/220px-AnchorBend_HowTo.jpg)
See also[]
External links[]
- Grog. "Anchor Bend". Animated Knots. Retrieved May 5, 2013.
- Hitch knots
- Jamming knots
- Knot stubs