Area-to-area Lee model

This article does not cite any sources. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (November 2010) (Learn how and when to remove this template message)

The Lee model for area-to-area mode is a radio propagation model that operates around 900 MHz. Built as two different modes, this model includes an adjustment factor that can be adjusted to make the model more flexible to different regions of propagation.

Applicable to/under conditions[]

This model is suitable for using in data collected. The model predicts the behaviour of all links that has ends in specific areas.

Coverage[]

Frequency: 900 MHz band

Mathematical formulation[]

The model[]

The Lee model is formally expressed as:

${\displaystyle L\;=\;L_{0}\;+\;\gamma \log d\;-10\log {F_{A}}}$

where,

L = The median path loss. Unit: decibel (dB)

L₀ = The reference path loss along 1 km. Unit: decibel (dB)

${\displaystyle \gamma \;}$ = The slope of the path loss curve. Unit: decibels per decade

d = The distance on which the path loss is to be calculated.

F_A = Adjustment factor.

Calculation of reference path loss[]

The reference path loss is usually computed along a 1 km or 1 mile link. Any other suitable length of path can be chosen based on the applications.

${\displaystyle L_{0}\;=\;G_{B}\;+\;G_{M}\;+\;20\;(\log \lambda \;-\;\log d)\;-\;22}$

where,

G_B = Base station antenna gain. Unit: decibel with respect to isotropic antenna (dBi)

${\displaystyle \lambda }$ = Wavelength. Unit: meter (m).

G_M = Mobile station antenna gain. Unit: decibel with respect to isotropic antenna (dBi).

Calculation of adjustment factors[]

The adjustment factor is calculated as:

${\displaystyle F_{A}\;=\;F_{BH}\;F_{BG}\;F_{MH}\;F_{MG}\;F_{F}}$

where,

F_BH = Base station antenna height correction factor.

F_BG = Base station antenna gain correction factor.

F_MH = Mobile station antenna height correction factor.

F_MG = Mobile station antenna gain correction factor.

F_F = Frequency correction factor

Base-station antenna height correction factor[]

${\displaystyle F_{BH}\;=\;\left(\;{\frac {h_{B}}{30.48}}\;\right)^{2}}$

where,

h_B = Base-station antenna height. Unit: meter (m).

or

${\displaystyle F_{BH}\;=\;\left(\;{\frac {h_{B}}{100}}\;\right)^{2}}$

where,

h_B = Base-station antenna height. Unit: foot (ft).

Base-station antenna gain correction factor[]

${\displaystyle F_{BG}\;=\;{\frac {G_{B}}{4}}}$

where,

G_B = Base-station antenna gain. Unit: decibel with respect to half wave dipole antenna (dBd)

Mobile-station antenna height correction factor[]

${\displaystyle F_{MH}\;=\;{\begin{cases}\;\;{\frac {h_{M}}{3}}\;\;\;\;{\mbox{ if, }}h_{M}>3\\{\Big (}{\frac {h_{M}}{3}}{\Big )}^{2}{\mbox{ if, }}h_{M}\leq 3\end{cases}}}$

where,

h_M = Mobile-station antenna height. Unit: meter(m).

Mobile-antenna gain correction factor[]

${\displaystyle F_{MG}\;=\;G_{M}}$

where,

G_M = Mobile-station antenna gain. Unit: Decibel with respect to half wave dipole antenna (dBd).

Frequency correction factor[]

${\displaystyle F_{F}\;=\;{\big (}{\frac {f}{900}}{\big )}^{-n}{\mbox{ for }}2<n<3}$

where,

f = Frequency. Unit: megahertz (MHz)

See also[]

• Hata model
• Okumura model
• Young model
• Point-to-point Lee model