Arsenic trichloride

From Wikipedia, the free encyclopedia
Arsenic trichloride
Ball-and-stick model of arsenic trichloride
Names
Other names
Arsenic(III) chloride, Arsenous trichloride, Butter of arsenic, de Valagin's solution
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.029.144 Edit this at Wikidata
EC Number
  • 232-059-5
RTECS number
  • CG1750000
UNII
UN number 1560
  • InChI=1S/AsCl3/c2-1(3)4 checkY
    Key: OEYOHULQRFXULB-UHFFFAOYSA-N checkY
  • InChI=1/AsCl3/c2-1(3)4
    Key: OEYOHULQRFXULB-UHFFFAOYAG
  • Cl[As](Cl)Cl
Properties
AsCl3
Molar mass 181.28 g/mol
Appearance colourless liquid
Density 2.163 g/cm3, liquid
Melting point −16.2 °C (2.8 °F; 256.9 K)
Boiling point 130.2 °C (266.4 °F; 403.3 K)
hydrolysis
Solubility soluble in alcohol, ether, HCl, HBr
-79.9·10−6 cm3/mol
1.6006
Viscosity 9.77 x 10−6 Pa s
Hazards
GHS labelling:
GHS05: CorrosiveGHS06: ToxicGHS08: Health hazardGHS09: Environmental hazard
Signal word
 Danger
H301, H310, H314, H331, H350, H410
P201, P202, P260, P261, P262, P264, P270, P271, P273, P280, P281, P301+P310, P301+P330+P331, P302+P350, P303+P361+P353, P304+P340, P305+P351+P338, P308+P313, P310, P311, P321, P322, P330, P361, P363, P391, P403+P233, P405, P501
NFPA 704 (fire diamond)
4
0
1
Lethal dose or concentration (LD, LC):
LD50 (median dose)
 48 mg/kg
LCLo (lowest published)
 100 mg/m3 (cat, 1 hr)
200 mg/m3 (cat, 20 min)
338 ppm (rat, 10 min)[2]
NIOSH (US health exposure limits):
PEL (Permissible)
 [1910.1018] TWA 0.010 mg/m3[1]
REL (Recommended)
 Ca C 0.002 mg/m3 [15-minute][1]
IDLH (Immediate danger)
 Ca [5 mg/m3 (as As)][1]
Related compounds
Other anions
 Arsenic trioxide, Arsenic trifluoride
Other cations
 Antimony trichloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY  (what is checkY☒N ?)
Infobox references

Arsenic trichloride is an inorganic compound with the formula AsCl3, also known as arsenous chloride or butter of arsenic. This poisonous oil is colourless, although impure samples may appear yellow. It is an intermediate in the manufacture of organoarsenic compounds.[3]

Structure[]

AsCl3 is a pyramidal molecule with C3v symmetry. The As-Cl bond is 2.161 Å and the angle Cl-As-Cl is 98° 25'±30.[4][5] AsCl3 has four normal modes of vibration: ν1(A1) 416, ν2(A1) 192, ν3 393, and ν4(E) 152 cm−1.[6]

Synthesis[]

This colourless liquid is prepared by treatment of arsenic(III) oxide with hydrogen chloride followed by distillation:

As2O3 + 6 HCl → 2 AsCl3 + 3 H2O

It can also be prepared by chlorination of arsenic at 80–85 °C, but this method requires elemental arsenic.[3]

2 As + 3 Cl2 → 2 AsCl3

Arsenic trichloride can also be prepared by the reaction of arsenic oxide and sulfur monochloride. This method requires simple apparatus and proceeds efficiently:[7]

2 As2O3 + 6 S2Cl2 → 4 AsCl3 + 3 SO2 + 9 S

A convenient laboratory method is refluxing arsenic(III) oxide with thionyl chloride:[8]

2 As2O3 + 3 SOCl2 → 2 AsCl3 + 3 SO2

Reactions[]

Hydrolysis with water gives arsenous acid and hydrochloric acid:

AsCl3 + 3 H2O → As(OH)3 + 3 HCl

Although AsCl3 is less moisture sensitive than PCl3, it still fumes in moist air.[9]

AsCl3 undergoes redistribution upon treatment with As2O3 to give the inorganic polymer AsOCl. With chloride sources, AsCl3, forms salts containing the anion [AsCl4]−. Reaction with potassium bromide and potassium iodide give arsenic tribromide and arsenic triiodide, respectively.

AsCl3 is useful in organoarsenic chemistry, for example triphenylarsine is derived from AsCl3:[10]

AsCl3 + 6 Na + 3 C6H5Clchlorobenzene → As(C6H5)3triphenylarsine + 6 NaCl

Safety[]

Arsenic compounds are highly toxic, and AsCl3 especially so because of its volatility and solubility.

It is classified as an extremely hazardous substance in the United States as defined in Section 302 of the U.S. Emergency Planning and Community Right-to-Know Act (42 U.S.C. 11002), and is subject to strict reporting requirements by facilities which produce, store, or use it in significant quantities.[11]

References[]

  1. ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0038". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ "Arsenic (inorganic compounds, as As)". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  3. ^ a b Sabina C. Grund, Kunibert Hanusch, Hans Uwe Wolf "Arsenic and Arsenic Compounds" in Ullmann's Encyclopedia of Industrial Chemistry, VCH-Wiley, 2008, Weinheim.doi:10.1002/14356007.a03_113.pub2
  4. ^ P. Kisliuk; C. H. Townes. "The Microwave Spectra and Molecular Structure of Phosphorus and Arsenic Trichloride". J. Chem. Phys. 1950, 18.
  5. ^ Jean Galy; Renee Enjalbertl Pierre Lecante; Andrzej Burian "AsCl3: From the crystalline to the liquid state. XRD (176< T (K) < 250) and WAXS (295K) studies" Inorg. Chem 2002, volume 41, pp. 693–698.doi:10.1021/ic0102788
  6. ^ Klapoetke, Thomas M. "The vibrational spectrum of arsenic trichloride" Main Group Metal Chemistry 1997, volume 20, pp. 81–83.
  7. ^ R. C. Smith, "Manufacture of Arsenic trichloride" The Journal of Industrial and Engineering Chemistry 1919, volume 11, pp. 109–110. doi:10.1021/ie50110a009
  8. ^ S. K. Pandey, A. Steiner, H. W. Roesky, S. Kamepalli, A. H. Cowley, "Arsenic(III)chloride" Inorganic Synthesis 1997, volume 31, pp. 148-150. doi:10.1002/9780470132623.ch24
  9. ^ Holleman, A. F.; Wiberg, E. Inorganic Chemistry Academic Press: San Diego, 2001. ISBN 0-12-352651-5.
  10. ^ Shriner, R. L.; Wolf, C. N. (1963). "Tetraphenylarsonium Chloride Hydrochloride". Organic Syntheses.; Collective Volume, 4, p. 910. Describes the preparation of As(C6H5)3.
  11. ^ "40 C.F.R.: Appendix A to Part 355—The List of Extremely Hazardous Substances and Their Threshold Planning Quantities" (PDF) (July 1, 2008 ed.). Government Printing Office. Archived from the original (PDF) on February 25, 2012. Retrieved October 29, 2011. Cite journal requires |journal= (help)
Retrieved from ""