Attenuation (brewing)

From Wikipedia, the free encyclopedia

In brewing, attenuation refers to the conversion of sugars into alcohol and carbon dioxide by the fermentation process; the greater the attenuation, the more sugar has been converted into alcohol. A more attenuated beer is drier and more alcoholic than a less attenuated beer made from the same wort.

Attenuation can be quantified by comparing the specific gravity — the density of a solution, relative to pure water — of the extract before and after fermentation, quantities termed the original and final gravities. Specific gravity can be measured by buoyancy, with a hydrometer. The higher the specific gravity of a solution, the higher the hydrometer floats.

Apparent attenuation is calculated using the equation:[1]

where AA is apparent attenuation and OG and FG are the original and final gravities. For example, if a beer's OG is 1.05 and its FG is 1.01, then the apparent attenuation is:

Attenuation can range between 0.33 and 0.80, but is usually 0.75.[2]

Because fermentation produces ethanol, which has a lower density than water (gravity of 0.787 at 25°C [3]), the apparent attenuation overestimates the actual percentage of sugars consumed.[4] Brewers generally refer to this apparent attenuation when using the word without qualification,[5] although the measurement of real attenuation — the actual percentage of sugar consumed by the yeast — is an important indicator of yeast health and for producing certain styles of beer. A beer which does not attenuate to the expected level in fermentation will have more residual sugar and thus be sweeter and heavier-bodied.[6]

References[]

  1. ^ "Everything You Need to Know about Attenuation". Craft Beer & Brewing. Retrieved June 5, 2019.
  2. ^ Andrew Campbell, The Book of Beer, 1956, p.53
  3. ^ "Specific Gravity - Liquids". The Engineering Toolbox. Retrieved July 15, 2014.
  4. ^ Palmer, John. "6.1 Yeast Terminology". How to Brew. Retrieved July 15, 2014.
  5. ^ "Apparent and Real Attenuation for Beer Brewers – Part 2". BeerSmith Homebrewing Blog. Retrieved July 15, 2014.
  6. ^ Palmer, John (July–August 2009). "Attenuation: Advanced Brewing". Brew Your Own. Retrieved July 15, 2014.
Retrieved from ""