BESM-6

From Wikipedia, the free encyclopedia
BESM-6
BESM-6 (London Science Museum).jpg
BESM-6 at London Science Museum
Design
ManufacturerMoscow Plant of Calculating and Analysing Machines (SAM)[1]
DesignerS. A. Lebedev[1]
Release date1968[1]
Units sold355[1]
Price530000 Soviet Rubles[2]
Casing
DimensionsFootprint : 150-200 m²
Weight-
Power30 kW @ 220 V 50 Hz[1]
System
Operating system
CPU48-bit processor @ 9 MHz[3][1]
MemoryUp to 192 kilobytes (32768 x 48 bits)[3]
MIPS1 MIPS [3]
FLOPS0.418 MFLOPS [4]
PredecessorBESM-4
Successor
  • v
  • t

BESM-6 (Russian: БЭСМ-6) was a Soviet electronic computer of the BESM series. It was the first Soviet second-generation, transistor-based computer.

Overview[]

The BESM-6 was the most well-known and influential model of the series designed at the Institute of Precision Mechanics and Computer Engineering. The design was completed in 1965. Production started in 1968 and continued for the following 19 years.[5]

Like its predecessors, the original BESM-6 was transistor-based (however, the version used in the 1980s as a component of the Elbrus supercomputer was built with integrated circuits). The machine's 48-bit processor ran at 10 MHz clock speed and featured two instruction pipelines, separate for the control and arithmetic units, and a data cache of sixteen 48-bit words. The system achieved a performance of 1 MIPS. The CDC 6600, a common Western supercomputer when the BESM-6 was released, achieved about 2 MIPS.

The system memory was word-addressable using 15-bit addresses. The maximum addressable memory space was thus 32K words (192K bytes). A virtual memory system allowed to expand this up to 128K words (768K bytes).

The BESM-6 was widely used in USSR in the 1970s for various computation and control tasks. During the 1975 Apollo-Soyuz Test Project the processing of the space mission telemetry data was accomplished by a new computer complex comprising a BESM-6. The Apollo-Soyuz mission's data processing by soviet scientists finished half an hour earlier than their American colleagues from NASA.[6] While this story is based only on Boris Malinovsky's book that he wrote 20 years after the mission and doesn't correspond with real characteristics of Soviet and American machines — BESM-6 was slower than even previous generation American CDC 6600.

A total of 355 of these machines were built. Production ended in 1987.

As the first Soviet computer with an installed base that was large for the time, the BESM-6 gathered a dedicated developer community. Over the years several operating systems [7] and compilers for programming languages such as Fortran, ALGOL and Pascal were developed.[8]

A modification of the BESM-6 based on integrated circuits, with 2-3 times higher performance than the original machine, was produced in the 1980s under the name as a component of the Elbrus supercomputer.

In 1992, one of the last surviving BESM-6 machines was purchased by the Science Museum in London, England.[9]

Peripherals[]

The BESM-6 could send output to an АЦПУ-128 (Алфавитно-Цифровое Печатающее Устройство) printer, and read input from punched cards in the GOST 10859 character set. A Consul-254 teletype, made by Zbrojovka Brno in Czechoslovakia, could be used for interactive sessions.[10] When CRT terminals became available, the BESM-6 could be connected to Videoton 340 terminals.[11][12]

Further reading[]

  • Savard, John J. G. (2018) [2005]. "Computer Arithmetic". quadibloc. The Early Days of Hexadecimal. Archived from the original on 2018-07-16. Retrieved 2018-07-16. (NB. Has information on the BESM-6 character set.)

References[]

  1. ^ a b c d e f BESM-6, Russian Virtual Museum
  2. ^ Electronic computers and analog devices, Grubov VI, Kirdan VS, 1977
  3. ^ a b c BESM-6 Nostalgia Page
  4. ^ Simulation of Whetston benchmark on a BESM-6, retrocomputing.stackexchange.com
  5. ^ Очерки по истории советской вычислительной техники и школ программирования (Издательство "Открытые Системы") Archived 2007-09-30 at the Wayback Machine
  6. ^ "The 1975 Apollo-Soyuz space mission was controlled from a new computer complex that included a BESM-6 and other domestic high-speed computers developed by Lebedev’s students. Prior to this, the space mission telemetry data processing would have taken approximately thirty minutes. Using the new computer complex, the work was performed in one minute. Soviet scientists completed all of the Apollo-Soyuz mission’s data processing one half hour earlier than their American colleagues. This marked Lebedev’s real triumph: his school and his students developed a first-class computer that was capable of competing with the best machines in the world. For their work on BESM-6, Lebedev and his team won the State Prize" Boris Malinovsky, Pioneers of Soviet Computing, pdf-book 2010, p. 100.
  7. ^ Irina Kraineva. DISPAK - Operating System for USSR Nuclear Project. Open Systems, volume 24, number 1, 2016.
  8. ^ http://www.computer-museum.ru/books/7.htm
  9. ^ Doron Swade, Back in the USSR, Inc. magazine, 1996
  10. ^ Èlektričeskaâ pišuŝaâ mašina CONSUL 254: tehničeskoe opisanie (Electronic Writing Machine CONSUL 254: Technical description). Zbrojovka Brno, 1972.
  11. ^ Laimutis Telksnys and Antanas Zilinskas. Computers in Lithuania. IEEE Annals of the History of Computing, volume 21, number 3, July–September 1999.
  12. ^ The use of the "Videoton-340" video terminal with a printer on-line with the BESM-6 for electrical power network enterprise data processing. In USSR Report: Cybernetics, Computers and Automation Technology. Central Intelligence Agency, 26 December 1979.

External links[]

Retrieved from ""