BMX bike

From Wikipedia, the free encyclopedia
A "street" style BMX bike for riding around the city traversing obstacles such as ledges, benches, stair sets, and rails.

A BMX bike is an off-road sport bicycle used for racing and stunt riding. BMX means bicycle motocross.

Construction[]

Though originally denoting a bicycle intended for BMX racing, the term "BMX bike" is now used to encompass race bikes, as well as those used for the dirt, vert, park, street, flatland and BMX freestyle disciplines of BMX. BMX frames are made of various types of steel, and (largely in the racing category) aluminum or carbon. Cheaper, low-end bikes are usually made of steel. High-range bikes are mostly chromoly or high tensile steel, although the latter is noticeably heavier with respect to strength. High-performance BMX bikes use lightweight 4130 chromoly, or generation 3 chromoly.[1]

The introduction and widespread popularity of the cassette hub and freecoaster has ushered in the use of smaller gearing on BMX bikes. Instead of the old 44/16 gearing found on almost all older BMX bikes and current BMX racing bikes, new freestyle bikes use gearing such as 36/13, 33/12, 30/11, 28/10, 25/9, 23/8,and even 22/8, all of which have similar gear ratios around 2.8:1. Advantages of smaller gearing hubs include lighter weight, and more clearance when grinding. Freecoaster hubs are popular among street and flatland riders. A freecoaster allows the rear wheel to roll backwards without engaging the hub and forcing the cranks rotate backwards as they would on a normal freewheel or cassette style hub. However many riders still prefer cassettes as they engage more quickly when pedalling forward and tend to cost slightly less.

Freestyle rider performing a jump based stunt

On most freestyle, street, and park BMX bikes, the wheels have 36 spokes. Race bike wheels also usually have 36 spokes, but wheels for the smallest racers, sometimes as young as three years old, can be built with 18 or 28 spokes. More aggressive riders may opt for wheels with a spoke count of up to 48 spokes, however hub and wheel combinations for this are becoming difficult to source.

BMX racing bike wheels vary in size, from 16" to 26", with 20" being the most popular.

Dirt jumping and freestyle bike wheel sizes include 16" and 18" for younger, smaller riders, 20" for most other riders, and a few companies including Haro and Sunday offer 24" freestyle bikes for taller or older riders who feel cramped on a standard 20" BMX bike.

History[]

BMX started in the early 1970s when children began racing their bicycles on dirt tracks in Southern California, drawing inspiration from the motocross superstars of the time. The size and availability of the Schwinn Sting-Ray made it the natural bike of choice, since they were easily customized for better handling and performance. BMX racing was a phenomenon by the mid-1970s. Children were racing standard road bikes off-road, around purpose-built tracks in California. The 1972 motorcycle racing documentary On Any Sunday is generally credited with inspiring the movement nationally in the US; its opening scene shows kids riding their Schwinn Stingrays off-road. By the middle of that decade the sport achieved critical mass, and manufacturers began creating bicycles designed especially for the sport.

George E. Esser founded the National Bicycle League as a non-profit bicycle motocross sanctioning organization in 1974. Before they set up the NBL, George and his wife, Mary, promoted motorcycle races with the AMA (American Motocross Association), and through their "National Motorcycle League", or NML. Their two sons, Greg and Bryan, raced motorcycles, but also enjoyed riding and racing BMX with their friends. It was their sons’ interest, and the absence of an Eastern presence by the National Bicycle Association (NBA, at the time the only sanctioning body of BMX Racing), that prompted George to start the NBL in Florida.

By 1977 the American Bicycle Association (ABA) was organized as a national sanctioning body for the growing sport. In April 1981, the was founded, and their first world championships were held in 1982. Since January 1993 BMX has been integrated into the Union Cyclist International (UCI).

BMX freestyle (which, today, encompasses the Dirt, Vert, Park, Street and Flatland disciplines) was created by racers who enjoyed pushing the stylistic limits of what they could do on their bikes. Haro Bikes founder Bob Haro is popularly known as "The Father of Freestyle".

BMX Freestyle is now[when?] one of the staple events at the annual Summer X Games Extreme Sports competition and the ETNIES backyard jam, held largely on both coasts of the United States. The popularity of the sport has increased due to its relative ease and availability of riding locations. At the summer Olympic games, Latvian Māris Štrombergs (2012) and Anne-Caroline Chausson of France (2008) were crowned the first Olympic champions in Men's and Women's BMX Racing, respectively.

Some BMX riders go on to other cycling sports such as Australian Olympian Jared Graves, former "golden child" Eric Carter, and youth BMX racer Aaron Gwin. Conversely, mountain bike racers sometimes cross over to BMX racing, such as 2008 Olympic Bronze Medallist Jill Kintner of the US and current Swiss champion David Graf.

Models[]

BMX bicycles are available in these models types:[1]

  • Dirt – dirt style are closest to the original BMX bikes. They feature tyres with thicker tread for better grip on potentially loose surfaces.
  • Flatland – flatland style BMX bikes have different frame geometry to traditional park BMX bikes because flatland riding requires precise balance on multiple parts of the bike.
  • Park – park style BMX bikes (also called vert) are often made lighter by reducing the structural strength of particular areas of the bike, which is possible because park riding does not occur on particularly rough terrain. Brakes may or may not be installed.
  • Race – racing style BMX bikes feature a larger front sprocket than other BMX bikes in order to create a high gear ratio, enabling the rider to pedal at high speeds. Racing BMX bikes are required to have brakes.
  • Street – modern street style BMX bikes commonly have nylon composite sleeved pegs attached to the axles to enable the rider to grind or balance on various raised obstacles. Metal pegs have fallen out of favor among street riders due to the unkempt nature of street obstacles. Also, the street BMX is commonly heavier and stronger than the traditional dirt or park style BMX bikes due to the extra strain encountered with the hard, flat surfaces of street riding. Street riders commonly have no cable brakes to enable the rider to spin the bars without the brake cable getting in the way. Riders use their foot against the top of the back tyre to slow down, or fit a u-brake to the rear with an extended cable or a gyro to allow for full rotation of the bars.

Notable BMX bike manufacturers[]

Current and former makers of BMX bikes include:

See also[]

References[]

  1. ^ a b "How To Choose A BMX Bike". BMX-Bike.com. Archived from the original on 2011-07-08. Retrieved 2009-07-11.
Retrieved from ""