Bar-link chain
![]() | This article needs additional citations for verification. (January 2009) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/da/Britannica_Bicycle_Block_Chain.jpg/220px-Britannica_Bicycle_Block_Chain.jpg)
Top view of a segment from a "bar-link" bicycle chain.
A bar-link chain, also called a block-and-bar chain or a block chain, is a mechanical drive chain. It is composed of side plates, where each plate straddles one end of a block and is connected to the block with a pin going through a hole at one end of the block. Bar-link chains are simple, and often heavier and less efficient when compared with modern roller chains due to the lack of rolling motion as the chain engages and disengages the sprockets.
![](http://upload.wikimedia.org/wikipedia/commons/d/d5/Bar-link_or_block_chain.jpg)
Bicycle chain of the bar-link or block chain type on safety bicycle in a vintage (c1900) photograph
However, they have advantages in specific applications, especially where no sprockets are needed, where strength is a greater concern than efficiency (high loads), and where the chain has special fixtures for holding or engaging a load.[1]
See also[]
- Drive chain
References[]
- ^ Chains for Power Transmission and Material Handling. Marcel Dekker, Inc. 1982.
Categories:
- Chain drives
- Chains
- Technology stubs
- Engineering stubs
- Motorcycle stubs