Berkovich tip
A Berkovich tip is a type of nanoindenter tip used for testing the indentation hardness of a material. It is a three-sided pyramid which is geometrically self-similar. The popular Berkovich now has a very flat profile, with a total included angle of 142.3 degrees and a half angle of 65.27 degrees, measured from the axis to one of the pyramid flats. This Berkovich tip has the same projected area-to-depth ratio as a Vickers indenter. The original tip shape was invented by Russian scientist E.S. Berkovich in the USSR c. 1950, which has a half angle of 65.03 degrees.[1][2]
As it is three sided, it is easier to grind these tips to a sharp point and so is more readily employed for nanoindentation tests. It is typically used to measure bulk materials and films greater than 100 nanometres (3.9×10−6 in) thick.
References[]
- ^ E.S. Berkovich, "Three-Faceted Diamond Pyramid for Micro-hardness Testing," Zavodskaya Laboratoria, Vol. 16 #3, 1950, p 345-347 (in Russian). Translated into English and published in Industrial Diamond Review, Vol. 11 No. 127, June 1951, p 129-132.
- ^ M.M. Khrushchov & E.S. Berkovich, "Methods of Determining the Hardness of Very Hard Materials: The Hardness of Diamond," Zavodskaya Laboratoria, 1950 (2), p 193 -196 (in Russian). Translated into English by W.G.C and published in Industrial Diamond Review, Vol. 11, Feb 1951, p 42-49 (in English).
 | This tool article is a stub. You can help Wikipedia by . |
- Hardness tests
- Soviet inventions
- Russian inventions
- Tool stubs