Boiling liquid expanding vapor explosion
![]() | This article's tone or style may not reflect the encyclopedic tone used on Wikipedia. (July 2013) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/03/BLEVE.jpg/300px-BLEVE.jpg)
A boiling liquid expanding vapor explosion (BLEVE, /ˈblɛviː/ BLEV-ee) is an explosion caused by the rupture of a vessel containing a pressurized liquid that has reached temperatures above its boiling point.[1] [2] Because the boiling point of a liquid rises with pressure, the contents of the pressurized vessel can remain liquid so long as the vessel is intact. If the vessel's integrity is compromised, the loss of pressure and dropping boiling point can cause the liquid to rapidly convert to gas and expand extremely rapidly. If the gas is combustible as well, as is the case e.g. with hydrocarbons and alcohols, further damage can be caused by an ensuing fire.
Mechanism[]
![]() | This section needs additional citations for verification. (July 2013) |
There are three key elements causing a BLEVE:[3]
- A substance in liquid form at a temperature above its normal atmospheric pressure boiling point.
- A containment vessel maintaining the pressure that keeps the substance in liquid form.
- A sudden loss of containment that rapidly drops the pressure.
Typically, a BLEVE starts with a container of liquid which is held above its normal, atmospheric-pressure boiling temperature. Many substances normally stored as liquids, such as CO2, propane, and other similar industrial gases have boiling temperatures, at atmospheric pressure, far below room temperature. In the case of water, a BLEVE could occur if a pressurized chamber of water is heated far beyond the standard 100 °C (212 °F). That container, because the boiling water pressurizes it, must be capable of holding liquid water at very high temperatures.
If the pressurized vessel, containing liquid at high temperature (which may be room temperature, depending on the substance) ruptures, the pressure which prevents the liquid from boiling is lost. If the rupture is catastrophic, where the vessel is immediately incapable of holding any pressure at all, then there suddenly exists a large mass of liquid which is at very high temperature and very low pressure. This causes a portion of the liquid to "instantaneously" boil, which in turn causes an extremely rapid expansion. Depending on temperatures, pressures and the substance involved, that expansion may be so rapid that it can be classified as an explosion, fully capable of inflicting severe damage on its surroundings.
Water example[]
For example, a tank of pressurized liquid water held at 204.4 °C (400 °F) might be pressurized to 1.7 MPa (250 psi) above atmospheric ("gauge") pressure. If the tank containing the water were to rupture, there would for a brief moment exist a volume of liquid water which would be at:
- atmospheric pressure
- a temperature of 204.4 °C (400 °F).
At atmospheric pressure the boiling point of water is 100 °C (212 °F) - liquid water at atmospheric pressure does not exist at temperatures higher than 100 °C (212 °F). At that moment, the water would boil and turn to vapor explosively, and the 204.4 °C (400 °F) liquid water turned to gas would take up significantly more volume (≈1,600-fold) than it did as liquid, causing a vapor explosion. Such explosions can happen when the superheated water of a boiler escapes through a crack in a boiler, causing a boiler explosion.
BLEVEs without chemical reactions[]
A BLEVE need not be a chemical explosion, nor does there need to be a fire: however, if a flammable substance is subject to a BLEVE it may also be subject to intense heating, either from an external source of heat which may have caused the vessel to rupture in the first place or from an internal source of localized heating such as skin friction. This heating can cause a flammable substance to ignite, adding a secondary explosion caused by the primary BLEVE. While blast effects of any BLEVE can be devastating, a flammable substance such as propane can add significantly to the danger.
![Bleve explosion.svg](http://upload.wikimedia.org/wikipedia/commons/thumb/2/2a/Bleve_explosion.svg/500px-Bleve_explosion.svg.png)
While the term BLEVE is most often used to describe the results of a container of flammable liquid rupturing due to fire, a BLEVE can occur even with a non-flammable substance such as water,[4] liquid nitrogen,[5] liquid helium or other refrigerants or cryogens, and therefore is not usually considered a type of chemical explosion. Note that in the case of liquefied gasses, BLEVEs can also be hazardous because of rapid cooling due to the absorption of the enthalpy of vaporization (e.g. frostbites), or because of possible asphyxiation if a large volume of gas is produced and not rapidly dispersed (e.g. inside a building, or in a trough in the case of heavier-than-air gasses), or because of the toxicity of the gasses produced.
Fires[]
BLEVEs can be caused by an external fire near the storage vessel causing heating of the contents and pressure build-up. While tanks are often designed to withstand great pressure, constant heating can cause the metal to weaken and eventually fail. If the tank is being heated in an area where there is no liquid, it may rupture faster without the liquid to absorb the heat. Gas containers are usually equipped with relief valves that vent off excess pressure, but the tank can still fail if the pressure is not released quickly enough.[1] Relief valves are sized to release pressure fast enough to prevent the pressure from increasing beyond the strength of the vessel, but not so fast as to be the cause of an explosion. An appropriately sized relief valve will allow the liquid inside to boil slowly, maintaining a constant pressure in the vessel until all the liquid has boiled and the vessel empties.
If the substance involved is flammable, it is likely that the resulting cloud of the substance will ignite after the BLEVE has occurred, forming a fireball and possibly a fuel-air explosion, also termed a vapor cloud explosion (VCE). If the materials are toxic, a large area will be contaminated.[6]
Incidents[]
The term "BLEVE" was coined by three researchers at the Factory Mutual insurance company, in the analysis of an accident at one of their research facilities in 1957 involving a chemical reactor vessel.[7]
On 18 August 1959, the Kansas City Fire Department suffered its second largest loss of life in the line of duty, when a 25,000 gallon (95,000 liter) gasoline tank exploded during a fire on Southwest Boulevard, killing 5 firefighters.[citation needed]
Examples of other BLEVE incidents have included:
- 28 June 1959: Meldrim Trestle Disaster in Meldrim, Georgia USA.
- 28 March 1960: Cheapside Street whisky bond fire in Glasgow, Scotland;[citation needed]
- 4 January 1966: Feyzin disaster; explosion of an LPG storage tank near Feyzin, France;
- 21 June 1970: explosion of a derailed propane tank car in Crescent City, Illinois;[citation needed]
- 5 July 1973: Kingman explosion; explosion of a burning propane tank car in Kingman, Arizona;[citation needed]
- 31 January 1978: rupture of a liquid nitrogen tank[8] at an Air Products & Chemicals and Mobay Chemical Corporation facility in New Martinsville, West Virginia; [1]
- 23 February, 1978: Waverly, Tennessee, tank car explosion; a tank car carrying liquefied petroleum gas exploded as a result of cleanup related to a train derailment.
- 1 July 1978: The Los Alfaques disaster; an overloaded tanker truck carrying liquefied propylene exploded next to a camping site in Alcanar, Spain resulting in 217 deaths.
- 19 November 1984: A fire at an liquefied petroleum gas (LPG) tank farm triggers multiple BLEVEs in the San Juanico disaster at San Juan Ixhuatepec, near Mexico City;[citation needed]
- 23 December 1988: Memphis tank truck disaster; a tank truck carrying propane ruptured, causing ignition of leaking gas; the tank was subsequently launched from the crash site and crashed into a nearby building.
- 1 April 1990 : Sydney, Australia; A near-disaster occurred when Boral's St. Peters facility experienced a LPG fuel tank explosion on the night of 1 April 1990. A fire broke out at about 9:00 P.M., burning for over nine hours. A 100-tonne LPG cylinder and many smaller tanks exploded. The 100-tonne tank was shot from its support structure and bounced along the ground, coming to rest in the Alexandria Canal next to the site. Evacuations involved around 3.000 people from the surrounding area, in a two km radius. There were no casualties.[9]
- 1 May 1999: Explosion of a propane tank truck near Kamena Vourla, Greece resulting in 5 deaths
- 10 August 2008: Toronto propane explosion; multiple explosions at a propane facility in Toronto, Ontario.[citation needed]
- 29 June 2009: Viareggio train derailment; 32 dead and 26 injured after the explosion of two tank railway wagons, derailed and loaded with LPG.
- 6 March 2015 MRI machine, liquid helium, BLEVE, Oradell Animal hospital, Paramus, NJ[10][full citation needed][failed verification]
- 3 April 2017, Semi Closed Receiver, Condensate, BLEVE, Loy-Lange Box Co, St Louis, Missouri.[11][full citation needed]
- 6 August 2018: tanker truck explosion near an airport in Bologna, Italy.[12][13]
- 21 March 2019 BLEVE in Yancheng, Jiangsu, China[14][full citation needed]
Safety measures[]
![]() | This section needs expansion. You can help by . (July 2013) |
Some fire mitigation measures are listed under liquefied petroleum gas.
- Pressure relief valve[15]
- Thermal barrier[15][16]
- Water spray cooling[15][16]
- Maintenance of pressure tanks to avoid damage or corrosion[16]
Transport Canada published a training video for emergency response personnel to respond to and prevent BLEVEs.[16] They also advise that expert advice can be obtained from Transport Canada’s Canadian Transport Emergency Centre, CANUTEC.
See also[]
- Boiler explosion
- Expansion ratio
- Explosive boiling or phase explosion
- PEPCON disaster
- Rapid phase transition
- Viareggio train derailment
- Toronto propane explosion
- Gas carriers
- Lac-Mégantic rail disaster
References[]
- ^ Jump up to: a b Kletz, Trevor (March 1970). Critical Aspects of Safety and Loss Prevention. London: Butterworth–Heinemann. pp. 43–45. ISBN 0-408-04429-2.
- ^ "What and vessel pressure rating. firefighters need to know about BLEVEs". FireRescue1. Retrieved 8 October 2020.
- ^ CCPS (Center for Chemical Process Safety (2011). Guidelines for Vapor Cloud Explosion, Pressure Vessel Burst, BLEVE, and Flash Fire Hazards. Wiley. ISBN 9781118209875.
- ^ "Temperature Pressure Relief Valves on Water Heaters: test, inspect, replace, repair guide". Inspect-ny.com. Retrieved 12 July 2011.
- ^ Liquid nitrogen BLEVE demo
- ^ "Chemical Process Safety" (PDF). Archived from the original (PDF) on 20 July 2011. Retrieved 12 July 2011.
- ^ David F. Peterson, BLEVE: Facts, Risk Factors, and Fallacies, Fire Engineering magazine (2002).
- ^ "STATE EX REL. VAPOR CORP. v. NARICK". Supreme Court of Appeals of West Virginia. 12 July 1984. Retrieved 16 March 2014.
- ^ "Getting Into the European Market". boral.com History. Boral. Retrieved 12 December 2020.
- ^ https://abc7ny.com/news/3-hurt-1-critically-in-paramus-animal-hospital-explosion/547584/
- ^ "Boiling liquid expanding vapor explosion https://www.csb.gov/assets/1/20/factual_investigative_update1.pdf?16181
- ^ "Bologna tanker truck explosion leaves two dead". 6 August 2018. Retrieved 6 August 2018.
- ^ "Tanker explodes on the road near Bologna airport". 6 August 2018. Retrieved 8 August 2018.
- ^ BLEVE
- ^ Jump up to: a b c "BLEVE Safety Precautions" (PDF). noaa.gov. National Oceanic and Atmospheric Administration. 2016. Archived (PDF) from the original on 22 April 2020. Retrieved 16 July 2020.
- ^ Jump up to: a b c d "BLEVE – Response and Prevention". tc.canada.ca. Transport Canada. Archived from the original on 17 July 2020. Retrieved 16 July 2020.
External links[]
![]() |
Look up boiling liquid expanding vapor explosion in Wiktionary, the free dictionary. |
![]() |
Wikimedia Commons has media related to BLEVE. |
- BLEVE Demo on YouTube – video of a controlled BLEVE demo
- huge explosions on YouTube – video of propane and isobutane BLEVEs from a train derailment at Murdock, Illinois (3 September 1983)
- Propane BLEVE on YouTube – video of BLEVE from the Toronto propane depot fire
- Moscow Ring Road Accident on YouTube - Dozens of LPG tank BLEVEs after a road accident in Moscow
- Kingman, AZ BLEVE – An account of 5 July 1973 explosion in Kingman, with photographs
- Propane Tank Explosions – Description of circumstances required to cause a propane tank BLEVE.
- Analysis of BLEVE Events at DOE Sites - Details physics and mathematics of BLEVEs.
- HID - SAFETY REPORT ASSESSMENT GUIDE: Whisky Maturation Warehouses - The liquor is aged in wooden barrels that can suffer BLEVE.
- Explosives
- Firefighting
- Fire
- Types of fire
- Gas technologies
- Industrial fires and explosions