CarGoTram

This article may be expanded with text translated from the corresponding article in German. (December 2016) Click [show] for important translation instructions. Machine translation like DeepL or Google Translate is a useful starting point for translations, but translators must revise errors as necessary and confirm that the translation is accurate, rather than simply copy-pasting machine-translated text into the English Wikipedia. Consider adding a topic to this template: there are already 7,356 articles in the main category, and specifying|topic= will aid in categorization. Do not translate text that appears unreliable or low-quality. If possible, verify the text with references provided in the foreign-language article. You must provide copyright attribution in the edit summary accompanying your translation by providing an interlanguage link to the source of your translation. A model attribution edit summary is Content in this edit is translated from the existing German Wikipedia article at [[:de:]]; see its history for attribution. You should also add the template {{Translated page}} to the talk page. For more guidance, see Wikipedia:Translation.

This article needs additional citations for verification. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (September 2014) (Learn how and when to remove this template message)

CarGoTram
The CarGoTram
Manufacturer	Schalker Eisenhütte Maschinenfabrik GmbH
Constructed	2000
Number built	2
Formation	5 EMU + 7 middle carriages
Specifications
Train length	59,400 mm (194 ft 10+5⁄8 in)
Width	2,200 mm (86+5⁄8 in)
Maximum speed	50 km/h (31 mph)
Weight	90 t (89 long tons; 99 short tons)
Power output	20 × 45 kW (60.35 hp) = 900 kW (1,207 hp)
Track gauge	1,450 mm (4 ft 9+3⁄32 in)

The CarGoTram was a freight tram in Dresden, Germany. It supplied Volkswagen's "Transparent Factory" with parts for car assembly.

History[]

CarGoTram ran by Volkswagen in Dresden. Trams operated by the service were used to carry freight, as opposed to passengers.

The idea of building a "transparent factory" for Volkswagen automobile production in Dresden arose in 1997. On 3 March 2000, Dresdner Verkehrsbetriebe AG (DVB AG, Dresden Public Transport Co.) and Volkswagen Automobil-Manufaktur Dresden GmbH signed a contract for the CarGoTram. Car parts were to be transported by tram from the logistics center in Dresden Friedrichstadt to the new factory, using infrastructure normally used for passenger trams. The 4 km (2.5 mi) long route from the logistics center to the factory ran straight through the inner city of Dresden; the use of trucks would have caused an increase of traffic in the city.

Two CarGoTrams were built by Schalker Eisenhütte Maschinenfabrik GmbH Gelsenkirchen, at a cost of 6.5 million Deutsche Mark each.

The freight tram was officially introduced in Dresden on 16 November 2000 and had its first test run on 3 January 2001.

Production of the VW Phaeton in Dresden ended in March 2016. The service restarted for production of the VW e-Golf in March 2017.^[1]

After the first rumors appeared in mid 2020 that the CarGoTram will be soon out of service, Volkswagen finally announced on 19 October 2020 that it will stay in service until late December 2020. The reason for this would be the end of the production of the VW e-Golf and the new logistics concept for the start of the VW ID.3 production.^[2] The last service was planned for the 23 December 2020.

On 10 December 2020, around two weeks before the last planned day in service, a van crashed in one of the CarGoTrams. The tram was turning right to the entry of the Gläserne Manufaktur ("Transparent Factory") as the car probably passed a red traffic light and collided with the tram. Both vehicles were damaged. As the other CarGoTram was also not in service at that time, this accident eventually was the end of service for the CarGoTram. If it will be in service again transporting other goods for another company someday is currently unclear.^[3]

Route[]

CarGoTram ran every hour. If necessary, it could run every 40 minutes. Several different routes were used. The main route went from the logistics center in Friedrichstadt via Postplatz and Grunaer Straße to Straßburger Platz and finally on to the factory. If there was heavy traffic, the tram could also take route via the main station or other routes.

Technology[]

The CarGoTram is a bidirectional vehicle consisting of 5 segments. The standard formation was three freight units and two combination freight/control units. The control cars have less capacity (7,500 kg or 16,500 lb) than the middle cars (15,000 kg or 33,000 lb), because of space devoted to the driver’s cab. Total capacity is the equivalent of three trucks (214 m³ or 7,600 cu ft).

The running gear for the tram was recycled from out-of-service Tatra trams, mostly Tatra T4. The bodies were newly built.

All axles of the control car as well as the middle cars were driven.

See also[]

• Cargo trams, use of trams for freight
• Trams in Dresden

References[]

External links[]

Wikimedia Commons has media related to CarGoTram.

• "CarGoTram photos", www.railfaneurope.net