Cross-linking immunoprecipitation

Cross-linking immunoprecipitation (CLIP) is a method used in molecular biology that combines UV cross-linking with immunoprecipitation in order to analyse protein interactions with RNA or to precisely locate RNA modifications (e.g. m6A).^{[1][2][3][4][5]} CLIP-based techniques can be used to map RNA binding protein binding sites or RNA modification sites ^[5][6] of interest on a genome-wide scale, thereby increasing the understanding of post-transcriptional regulatory networks.

Workflow[]

CLIP begins with the in-vivo cross-linking of RNA-protein complexes using ultraviolet light (UV). Upon UV exposure, covalent bonds are formed between proteins and nucleic acids that are in close proximity.^[7] The cross-linked cells are then lysed, and the protein of interest is isolated via immunoprecipitation. In order to allow for sequence specific priming of reverse transcription, RNA adapters are ligated to the 3' ends, while radiolabeled phosphates are transferred to the 5' ends of the RNA fragments. The RNA-protein complexes are then separated from free RNA using gel electrophoresis and membrane transfer. Proteinase K digestion is then performed in order to remove protein from the RNA-protein complexes. This step leaves a peptide at the cross-link site, allowing for the identification of the cross-linked nucleotide.^[8] After ligating RNA linkers to the RNA 5' ends, cDNA is synthesized via RT-PCR. High-throughput sequencing is then used to generate reads containing distinct barcodes that identify the last cDNA nucleotide. Interaction sites can be identified by mapping the reads back to the transcriptome.

History and applications[]

CLIP was originally undertaken to study interactions between the neuron-specific RNA-binding protein and splicing factor NOVA1 and NOVA2 in the mouse brain, identifying RNA binding sites that had Nova binding sites and were validated as Nova targets in knock-out mouse brains.^[9] In 2008 CLIP was combined with high-throughput sequencing (termed "HITS-CLIP") to generate genome-wide protein-RNA interaction maps for Nova;^[10] since then a number of other splicing factor maps have been generated, including those for PTB,^[11] RbFox2 (where it was renamed "CLIP-seq"),^[12] SFRS1,^[13] Argonaute,^[14] hnRNP C,^[15] the Fragile-X mental retardation protein FMRP,^[16] Ptbp2 (in the mouse brain),^[17] Mbnl2,^[18] the nElavl proteins (the neuron-specific Hu proteins),^[19] and even N6-Methyladenosine(m6A) RNA modification antibody.^[5] A review of the range of proteins studied by HITS-CLIP has been published.^[20]

HITS-CLIP (CLIP-seq) analysis of the RNA-binding protein Argonaute has been performed for the identification of microRNA targets^[21] by decoding microRNA-mRNA and protein-RNA interaction maps in the mouse brain,^[14][22] and subsequently in Caenorhabditis elegans,^[23] embryonic stem cells,^[24] and tissue culture cells.^[25] As a novel modification of HITS-CLIP, m6A-CLIP was developed to precisely map m6A locations in mRNA by UV-crosslinking m6A antibody to the target RNA.^[5] Recently, improved bioinformatics methods applied to Argonaute HITS-CLIP, have identified binding sites with single nucleotide resolution.^[4] Furthermore, the post-transcriptional regulatory networks of prokaryotic RNA binding proteins have been successfully elucidated under application of CLIP-seq.^[26]

miRNA target detection[]

The main steps (using Degradome sequencing concurrently) are:

• mapping CLIP-seq reads
• mapping Degradome-Seq reads
• grouping overlapping reads into clusters
• querying miRNA targets from different public databases
• identifying miRNA–target interactions with an alignment score from CleaveLand not exceeding the cutoff threshold of 7.0
• the ClipSearch program was developed to search for 6–8-mers (8-mer, 7-mer-m8 and 7-mer-A1) (2,5) in CLIP-Seq data
• The DegradomeSearch program was developed to search Degradome-Seq clusters for nearly perfect complements of miRNA sequences

Methods[]

HITS-CLIP or CLIP-Seq[]

HITS-CLIP,^[20] also known as CLIP-Seq, combines UV cross-linking and immunoprecipitation with high-throughput sequencing to identify binding sites of RNA-binding proteins. CLIP-seq depends on cross-linking induced mutation sites (CIMS) to localized protein-RNA binding sites.^[4] Because CIMS are reproducible, high sequencing depths allow CIMS to be differentiated from technical errors.

PAR-CLIP[]

PAR-CLIP (photoactivatable ribonucleoside–enhanced cross-linking and immunoprecipitation) is a biochemical method used for identifying the binding sites of cellular RNA-binding proteins (RBPs) and microRNA-containing ribonucleoprotein complexes (miRNPs).^[25] The method relies on the incorporation of photoreactive ribonucleoside analogs, such as 4-thiouridine (4-SU) and 6-thioguanosine (6-SG) into nascent RNA transcripts by living cells. Irradiation of the cells by UV light of 365 nm induces efficient cross-linking of photoreactive nucleoside-labeled cellular RNAs to interacting RBPs. Immunoprecipitation of the RBP of interest is followed by the isolation of the cross-linked and co-immunoprecipitated RNA. The isolated RNA is converted into a cDNA library and deep sequenced using high-throughput sequencing technology.^[25][28] Cross-linking the 4-SU and 6-SG analogs results in thymidine to cytidine, and guanosine to adenosine transitions respectively. As a result, PAR-CLIP can identify binding site locations with high accuracy.^[4]

However, PAR-CLIP is limited to cultured cells,^[4][27] and nucleoside cytotoxicity is a concern;^[3][25] it has been reported that 4-SU inhibits ribosomal RNA synthesis, induces a nucleolar stress response, and reduces cell proliferation.^[29] 4-SU substitution occurs in approximately 1 out of every 40 uridine nucleosides, and that T to C transitions frequently occur at the cross-link site.^[25]

Recently, PAR-CLIP has been employed to determine the transcriptome-wide binding sites of several known RBPs and microRNA-containing ribonucleoprotein complexes at high resolution. This includes the miRNA targeting AGO and TNRC6 proteins.^[22][25]

iCLIP[]

iCLIP (individual nucleotide–resolution cross-linking and immunoprecipitation) is a technique used for identifying protein-RNA interactions. The method uses UV light to covalently bind proteins and RNA molecules. As with all CLIP methods, iCLIP allows for the stringent purification of linked protein-RNA complexes, using immunoprecipitation followed by SDS-PAGE and membrane transfer. The radiolabelled protein-RNA complexes are then excised from the membrane, and treated with proteinase to release the RNA. This leaves one or two amino acids at the RNA cross-link site. The RNA is then reverse transcribed using barcoded primers. Because reverse transcription stops prematurely at the cross-link site, iCLIP allows RNA-protein interaction sites to be identified at high resolution. As a novel modification of iCLIP, m6A-CLIP further took advantage of the m6A-induced truncation sites (MITS) to precisely map m6A sites in mRNAs.^[5]

eCLIP[]

eCLIP (enhanced CrossLinking and ImmunoPrecipitation followed by high-throughput sequencing) is a method developed to provide a robust and reproducible framework to map RBP binding sites on RNAs transcriptome-wide.
eCLIP was designed to improve upon previous CrossLinking and ImmunoPrecipitation (CLIP) methods by increasing the ability to convert purified RNA bound by an RNA binding protein of interest into high-throughput sequencing library. The over 1000-fold improvement obtained with eCLIP not only decreases wasted sequencing of PCR duplicate molecules, it also dramatically decreases experimental failures during the CLIP procedure. Additionally, the amplification in eCLIP is now comparable to RNA-seq, enabling rigorous quantitative normalization against paired input controls (to remove background at ribosomal and other highly abundant RNAs) as well as quantitative comparison across peaks and samples, enabling the ability to detect allele-specific binding or differential RNA binding between conditions.
The eCLIP method relies on RBP-RNA interactions covalently linked using UV crosslinking of live cells. Cells are then lysed, and RNA is fragmented using limited RNase treatment. A specific RBP (and its bound RNA) is then immunoprecipitated using an antibody that specifically recognizes the targeted RBP. After ligation of a 3’ RNA adapter, immunoprecipitated material (as well as a paired input sample) are run on denaturing protein gels and transferred to nitrocellulose membranes. A region from the protein size to 75 kDa above is cut from the membrane and treated with Proteinase K to release RNA. After cleanup, RNA is then reverse transcribed to ssDNA, when a second adapter is ligated. This second adapter allows eCLIP to identify RNA-protein interaction sites with high resolution. PCR amplification is then used to obtain sufficient material for high-throughput sequencing. eCLIP can also be used to identify miRNA targets and profile RNA modifications such as m6A.
There are currently over 350 RBPs with eCLIP-validated commercially available antibodies. Additional antibodies have been identified for common peptide tags (including FLAG, V5, HA, and others). This enables the possibility of profiling model organisms or RBPs otherwise lacking suitable antibodies. ^[30]

Other CLIP methods[]

sCLIP (simple CLIP) is a technique that requires lower amounts of input RNA and omits radio-labeling of the immunoprecipitated RNA. The method is based on linear amplification of the immunoprecipitated RNA and thereby improves the complexity of the sequencing-library despite significantly reducing the amount of input material and omitting several purification steps. Additionally, it permits a radiolabel-free visualization of immunoprecipitated RNA by using a highly sensitive biotin-based labeling technique. Along with a bioinformatical platform this method is designed to provide deep insights into RNA–protein interactomes in biomedical science, where the amount of starting material is often limited (i.e. in case of precious clinical samples).^[31]

Advantages and limitations[]

Advantages[]

Early methods for identifying RNA-protein interactions relied on either the affinity purification of RNA-binding proteins or the immunoprecipitation of RNA-protein complexes. These methods lacked a cross-linking step and obtained low signal to noise ratios.^[9] Because RNA-binding proteins are frequently components of multi-protein complexes, RNAs bound to non-target proteins may be co-precipitated. The data obtained using early immunoprecipitation methods have been demonstrated to be dependent on the reaction conditions of the experiment. For example, the subset of RNA-protein interactions preserved depends highly on the protein concentrations and ionic conditions. Furthermore, the reassociation of RNA-binding proteins following cell lysis may lead to the detection of artificial interactions.^[32]

Formaldehyde cross-linking methods have been used to preserve RNA-protein interactions, but also generate protein-protein cross-links. UV cross-linking methods provide a significant advantage over formaldehyde cross-linking, as they avoid protein-protein cross-links entirely. Proteinase K digestion also confers an advantage to CLIP methods due to the peptide left at the cross-link site. Reverse transcription of the fragments through the cross-link site introduces mutations that are specific to each separate CLIP method, and may be used to determine the binding site with high accuracy.^[4]

Limitations[]

All CLIP library generation protocols require moderate quantities of cells or tissue (50–100 mg), require numerous enzymatic steps, and, for HITS-CLIP, extensive informatic analysis (as recently reviewed).^[33] Certain steps are difficult to optimize and frequently have low efficiencies. For example, overdigestion with RNase can decrease the number of identified binding sites.^[27] Cross-linking also presents a concern. The optimal cross-linking protocol varies between proteins,^[9] and the efficiency is typically between 1-5%. Cross-linking bias has been reported in the literature,^[34] but the impact of biases present in CLIP methods remains debatable. Computationally predicted miRNA targets derived from TargetScan^[35] are comparable to CLIP in identifying miRNA targets, raising questions as to its utility relative to existing predictions.^[35] Because CLIP methods rely on immunoprecipitation, antibody-epitope interactions are a potential obstacle. For instance, cross-linking at the epitope could impede antibody binding. Finally, significant differences have been observed between cross-linking sites in vivo in living cells and in vitro.^[36] Therefore, CLIP results may not necessarily reflect RNA-protein binding site interactions within the cell.

Similar methods[]

• RIP-Chip, same goal and first steps, but doesn't use cross-linking and uses microarray instead of sequencing
• ChIP-Seq, for finding interactions with DNA rather than RNA
• SELEX, a method for finding a consensus binding sequence

Further reading[]

References[]

Sources[]