Degasser

A degasser is a device used in drilling to remove gasses from drilling fluid which could otherwise form bubbles.

Degasser[]

For a small amount of entrained gas in a drilling fluid, the degasser can play a major role of removing small bubbles that a liquid film has enveloped and entrapped. In order for it to be released and break out the air and gas such as methane, H₂S and CO₂ from the mud to the surface, the drilling fluid must pass through a degassing technique, and it can be accomplished by the equipment called a degasser, which is also a major part of mud systems.

Types of Degasser[]

Vacuum Tank Degasser[]

Vacuum Type is the most common form of degasser. It can be horizontal, vertical or round vessel. A vacuum action is created to pull in the gas cut mud. When the liquid enters the tank it will flow and be distributed to a layer of internal baffle plates designed for the mud to flow in thin laminar film and is exposed to a vacuum that forces the gas to escape and break out of the mud. The vacuum pump moves the escaping gas from the vessel discharging it to the rig's flare or environmental control system.

Atmospheric Degasser[]

This type of degasser processes mud by accelerating fluid through a submerged pump impeller and impinging the fluid on a stationary baffles to maximize surface and thus enable escaping gas vent to atmosphere.^[1]

See also[]

Mud Gas Separator

Notes[]

External links[]

• Quick calculator for estimating vertical degasser size - Based on the minimum residence time required for the liquid phase so that entrained gas bubbles can escape.

• High quality vacuum degasser used in drilling fluid system