Difference set

For the set of elements in one set but not another, see relative complement. For the set of differences of pairs of elements, see Minkowski difference.

In combinatorics, a ${\displaystyle (v,k,\lambda )}$ difference set is a subset ${\displaystyle D}$ of size ${\displaystyle k}$ of a group ${\displaystyle G}$ of order ${\displaystyle v}$ such that every nonidentity element of ${\displaystyle G}$ can be expressed as a product ${\displaystyle d_{1}d_{2}^{-1}}$ of elements of ${\displaystyle D}$ in exactly ${\displaystyle \lambda }$ ways. A difference set ${\displaystyle D}$ is said to be cyclic, abelian, non-abelian, etc., if the group ${\displaystyle G}$ has the corresponding property. A difference set with ${\displaystyle \lambda =1}$ is sometimes called planar or simple.^[1] If ${\displaystyle G}$ is an abelian group written in additive notation, the defining condition is that every nonzero element of ${\displaystyle G}$ can be written as a difference of elements of ${\displaystyle D}$ in exactly ${\displaystyle \lambda }$ ways. The term "difference set" arises in this way.

Basic facts[]

• A simple counting argument shows that there are exactly ${\displaystyle k^{2}-k}$ pairs of elements from ${\displaystyle D}$ that will yield nonidentity elements, so every difference set must satisfy the equation ${\displaystyle k^{2}-k=(v-1)\lambda }$.
• If ${\displaystyle D}$ is a difference set, and ${\displaystyle g\in G}$, then ${\displaystyle gD=\{gd:d\in D\}}$ is also a difference set, and is called a translate of ${\displaystyle D}$ (${\displaystyle D+g}$ in additive notation).
• The complement of a ${\displaystyle (v,k,\lambda )}$-difference set is a ${\displaystyle (v,v-k,v-2k+\lambda )}$-difference set.^[2]
• The set of all translates of a difference set ${\displaystyle D}$ forms a symmetric block design, called the development of ${\displaystyle D}$ and denoted by ${\displaystyle dev(D)}$. In such a design there are ${\displaystyle v}$ elements (usually called points) and ${\displaystyle v}$ blocks (subsets). Each block of the design consists of ${\displaystyle k}$ points, each point is contained in ${\displaystyle k}$ blocks. Any two blocks have exactly ${\displaystyle \lambda }$ elements in common and any two points are simultaneously contained in exactly ${\displaystyle \lambda }$ blocks. The group ${\displaystyle G}$ acts as an automorphism group of the design. It is sharply transitive on both points and blocks.^[3]
  • In particular, if ${\displaystyle \lambda =1}$, then the difference set gives rise to a projective plane. An example of a (7,3,1) difference set in the group ${\displaystyle \mathbb {Z} /7\mathbb {Z} }$ is the subset ${\displaystyle \{1,2,4\}}$. The translates of this difference set form the Fano plane.
• Since every difference set gives a symmetric design, the parameter set must satisfy the Bruck–Ryser–Chowla theorem.^[4]
• Not every symmetric design gives a difference set.^[5]

Equivalent and isomorphic difference sets[]

Two difference sets ${\displaystyle D_{1}}$ in group ${\displaystyle G_{1}}$ and ${\displaystyle D_{2}}$ in group ${\displaystyle G_{2}}$ are equivalent if there is a group isomorphism ${\displaystyle \psi }$ between ${\displaystyle G_{1}}$ and ${\displaystyle G_{2}}$ such that ${\displaystyle D_{1}^{\psi }=\{d^{\psi }\colon d\in D_{1}\}=gD_{2}}$ for some ${\displaystyle g\in G_{2}}$. The two difference sets are isomorphic if the designs ${\displaystyle dev(D_{1})}$ and ${\displaystyle dev(D_{2})}$ are isomorphic as block designs.

Equivalent difference sets are isomorphic, but there exist examples of isomorphic difference sets which are not equivalent. In the cyclic difference set case, all known isomorphic difference sets are equivalent.^[6]

Multipliers[]

A multiplier of a difference set ${\displaystyle D}$ in group ${\displaystyle G}$ is a group automorphism ${\displaystyle \phi }$ of ${\displaystyle G}$ such that ${\displaystyle D^{\phi }=gD}$ for some ${\displaystyle g\in G}$. If ${\displaystyle G}$ is abelian and ${\displaystyle \phi }$ is the automorphism that maps ${\displaystyle h\mapsto h^{t}}$, then ${\displaystyle t}$ is called a numerical or Hall multiplier.^[7]

It has been conjectured that if p is a prime dividing ${\displaystyle k-\lambda }$ and not dividing v, then the group automorphism defined by ${\displaystyle g\mapsto g^{p}}$ fixes some translate of D (this is equivalent to being a multiplier). It is known to be true for ${\displaystyle p>\lambda }$ when ${\displaystyle G}$ is an abelian group, and this is known as the First Multiplier Theorem. A more general known result, the Second Multiplier Theorem, says that if ${\displaystyle D}$ is a ${\displaystyle (v,k,\lambda )}$-difference set in an abelian group ${\displaystyle G}$ of exponent ${\displaystyle v^{*}}$ (the least common multiple of the orders of every element), let ${\displaystyle t}$ be an integer coprime to ${\displaystyle v}$. If there exists a divisor ${\displaystyle m>\lambda }$ of ${\displaystyle k-\lambda }$ such that for every prime p dividing m, there exists an integer i with ${\displaystyle t\equiv p^{i}\ {\pmod {v^{*}}}}$, then t is a numerical divisor.^[8]

For example, 2 is a multiplier of the (7,3,1)-difference set mentioned above.

It has been mentioned that a numerical multiplier of a difference set ${\displaystyle D}$ in an abelian group ${\displaystyle G}$ fixes a translate of ${\displaystyle D}$, but it can also be shown that there is a translate of ${\displaystyle D}$ which is fixed by all numerical multipliers of ${\displaystyle D}$.^[9]

Parameters[]

The known difference sets or their complements have one of the following parameter sets:^[10]

• ${\displaystyle ((q^{n+2}-1)/(q-1),(q^{n+1}-1)/(q-1),(q^{n}-1)/(q-1))}$-difference set for some prime power ${\displaystyle q}$ and some positive integer ${\displaystyle n}$. These are known as the classical parameters and there are many constructions of difference sets having these parameters.
• ${\displaystyle (4n-1,2n-1,n-1)}$-difference set for some positive integer ${\displaystyle n}$. Difference sets with v = 4n − 1 are called Paley-type difference sets.
• ${\displaystyle (4n^{2},2n^{2}-n,n^{2}-n)}$-difference set for some positive integer ${\displaystyle n}$. A difference set with these parameters is a Hadamard difference set.
• ${\displaystyle (q^{n+1}(1+(q^{n+1}-1)/(q-1)),q^{n}(q^{n+1}-1)/(q-1),q^{n}(q^{n}-1)/(q-1))}$-difference set for some prime power ${\displaystyle q}$ and some positive integer ${\displaystyle n}$. Known as the McFarland parameters.
• ${\displaystyle (3^{n+1}(3^{n+1}-1)/2,3^{n}(3^{n+1}+1)/2,3^{n}(3^{n}+1)/2)}$-difference set for some positive integer ${\displaystyle n}$. Known as the Spence parameters.
• ${\displaystyle (4q^{2n}(q^{2n}-1)/(q-1),q^{2n-1}(1+2(q^{2n}-1)/(q+1)),q^{2n-1}(q^{2n-1}+1)(q-1)/(q+1))}$-difference set for some prime power ${\displaystyle q}$ and some positive integer ${\displaystyle n}$. Difference sets with these parameters are called Davis-Jedwab-Chen difference sets.

Known difference sets[]

In many constructions of difference sets the groups that are used are related to the additive and multiplicative groups of finite fields. The notation used to denote these fields differs according to discipline. In this section, ${\displaystyle {\rm {GF}}(q)}$ is the Galois field of order ${\displaystyle q}$, where ${\displaystyle q}$ is a prime or prime power. The group under addition is denoted by ${\displaystyle G=({\rm {GF}}(q),+)}$, while ${\displaystyle {\rm {GF}}(q)^{*}}$ is the multiplicative group of non-zero elements.

• Paley ${\displaystyle (4n-1,2n-1,n-1)}$-difference set:

Let ${\displaystyle q=4n-1}$ be a prime power. In the group ${\displaystyle G=({\rm {GF}}(q),+)}$, let ${\displaystyle D}$ be the set of all non-zero squares.

• Singer ${\displaystyle ((q^{n+2}-1)/(q-1),(q^{n+1}-1)/(q-1),(q^{n}-1)/(q-1))}$-difference set:

Let ${\displaystyle G={\rm {GF}}(q^{n+2})^{*}/{\rm {GF}}(q)^{*}}$. Then the set ${\displaystyle D=\{x\in G~|~{\rm {Tr}}_{q^{n+2}/q}(x)=0\}}$ is a ${\displaystyle ((q^{n+2}-1)/(q-1),(q^{n+1}-1)/(q-1),(q^{n}-1)/(q-1))}$-difference set, where ${\displaystyle {\rm {Tr}}_{q^{n+2}/q}:{\rm {GF}}(q^{n+2})\rightarrow {\rm {GF}}(q)}$ is the trace function ${\displaystyle {\rm {Tr}}_{q^{n+2}/q}(x)=x+x^{q}+\cdots +x^{q^{n+1}}}$.

• Twin prime power ${\displaystyle \left(q^{2}+2q,{\frac {q^{2}+2q-1}{2}},{\frac {q^{2}+2q-3}{4}}\right)}$-difference set when ${\displaystyle q}$ and ${\displaystyle q+2}$ are both prime powers:

In the group ${\displaystyle G=({\rm {GF}}(q),+)\oplus ({\rm {GF}}(q+2),+)}$, let ${\displaystyle D=\{(x,y)\colon y=0{\text{ or }}x{\text{ and }}y{\text{ are non-zero and both are squares or both are non-squares}}\}.}$^[11]

History[]

The systematic use of cyclic difference sets and methods for the construction of symmetric block designs dates back to R. C. Bose and a seminal paper of his in 1939.^[12] However, various examples appeared earlier than this, such as the "Paley Difference Sets" which date back to 1933.^[13] The generalization of the cyclic difference set concept to more general groups is due to R.H. Bruck^[14] in 1955.^[15] Multipliers were introduced by Marshall Hall Jr.^[16] in 1947.^[17]

Application[]

It is found by Xia, Zhou and Giannakis that difference sets can be used to construct a complex vector codebook that achieves the difficult Welch bound on maximum cross correlation amplitude. The so-constructed codebook also forms the so-called Grassmannian manifold.

Generalisations[]

A ${\displaystyle (v,k,\lambda ,s)}$ difference family is a set of subsets ${\displaystyle B=\{B_{1},\ldots ,B_{s}\}}$ of a group ${\displaystyle G}$ such that the order of ${\displaystyle G}$ is ${\displaystyle v}$, the size of ${\displaystyle B_{i}}$ is ${\displaystyle k}$ for all ${\displaystyle i}$, and every nonidentity element of ${\displaystyle G}$ can be expressed as a product ${\displaystyle d_{1}d_{2}^{-1}}$ of elements of ${\displaystyle B_{i}}$ for some ${\displaystyle i}$ (i.e. both ${\displaystyle d_{1},d_{2}}$ come from the same ${\displaystyle B_{i}}$) in exactly ${\displaystyle \lambda }$ ways.

A difference set is a difference family with ${\displaystyle s=1}$. The parameter equation above generalises to ${\displaystyle s(k^{2}-k)=(v-1)\lambda }$.^[18] The development ${\displaystyle dev(B)=\{B_{i}+g:i=1,\ldots ,s,g\in G\}}$ of a difference family is a 2-design. Every 2-design with a regular automorphism group is ${\displaystyle dev(B)}$ for some difference family ${\displaystyle B}$.

See also[]

• Combinatorial design

Notes[]

References[]

• Beth, Thomas; Jungnickel, Dieter; Lenz, Hanfried (1986), Design Theory, Cambridge: Cambridge University Press, ISBN 0-521-33334-2, Zbl 0602.05001
• Colbourn, Charles J.; Dinitz, Jeffrey H. (2007), Handbook of Combinatorial Designs, Discrete Mathematics and its Applications (2nd ed.), Boca Raton: Chapman & Hall/ CRC, ISBN 1-58488-506-8, Zbl 1101.05001
• van Lint, J.H.; Wilson, R.M. (1992), A Course in Combinatorics, Cambridge: Cambridge University Press, ISBN 0-521-42260-4, Zbl 0769.05001
• Wallis, W.D. (1988). Combinatorial Designs. Marcel Dekker. ISBN 0-8247-7942-8. Zbl 0637.05004.

Further reading[]

• Moore, EH; Pollastek, HSK (2013). Difference Sets: Connecting Algebra, Combinatorics, and Geometry. AMS. ISBN 978-0-8218-9176-6.
• Storer, Thomas (1967). Cyclotomy and difference sets. Chicago: Markham Publishing Company. Zbl 0157.03301.
• Xia, Pengfei; Zhou, Shengli; Giannakis, Georgios B. (2005). "Achieving the Welch Bound with Difference Sets" (PDF). IEEE Transactions on Information Theory. 51 (5): 1900–1907. doi:10.1109/TIT.2005.846411. ISSN 0018-9448. Zbl 1237.94007..

Xia, Pengfei; Zhou, Shengli; Giannakis, Georgios B. (2006). "Correction to ``Achieving the Welch bound with difference sets". IEEE Trans. Inf. Theory. 52 (7): 3359. doi:10.1109/tit.2006.876214. Zbl 1237.94008.

• Zwillinger, Daniel (2003). CRC Standard Mathematical Tables and Formulae. CRC Press. p. 246. ISBN 1-58488-291-3.