Dowlow Halt railway station

Dowlow Halt
The station site, on the line running past Dowlow Limestone Works
Location	Dowlow, High Peak England
Coordinates	53°12′27″N 1°50′53″W / 53.2076°N 1.8480°W / 53.2076; -1.8480Coordinates: 53°12′27″N 1°50′53″W / 53.2076°N 1.8480°W / 53.2076; -1.8480
Grid reference	SK102678
Platforms	2
Other information
Status	Disused
History
Original company	London and North Western Railway
Pre-grouping	London and North Western Railway
Post-grouping	London, Midland and Scottish Railway
Key dates
1920	Opened for workmen
4 Nov 1929	Opened to public
1 Nov 1954	Closed[1]

Dowlow Halt was opened in 1920 between Dowlow (hill now largely quarried away) and Greatlow to the south east of Buxton, Derbyshire on the London and North Western Railway line to Ashbourne and the south.

History[]

The line utilised part of the Cromford and High Peak Railway (which ran from Whaley Bridge to Cromford) joining it near Hindlow and proceeding to a branch to Ashbourne at Parsley Hay.

After leaving Hindlow the line began to climb at 1 in 60 through Hindlow Tunnel to Brigg's Sidings and its summit at Dowlow Halt. 1,260 feet (380 m) at the summit, this was the highest main line in England at the time. From Dowlow Halt the line travelled downhill at a gradient of 1 in 60 to Hurdlow.

Brigg's Sidings served Messrs. Briggs and the Dowlow Lime and Stone Company (later Steetley, then Redland Aggregates).

The halt itself was unstaffed with two short stone platforms and without buildings, since it was initially used by workmen's trains for the nearby works. It was opened for public services in November 1929. Passenger services on the line finished in 1954.

One section still exists, serving , and terminating a short distance further on at the Lafarge Dowlow sidings.^[2]

Route[]

See also[]

• Cromford and High Peak Railway

References[]

Bibliography[]

• Bentley, J.M., Fox, G.K., (1997) Railways of the High Peak: Buxton to Ashbourne (Scenes From The Past series 32), Romiley: Foxline Publishing