Dynamic frequency hopping

This article has multiple issues. Please help or discuss these issues on the . (Learn how and when to remove these template messages) This article provides insufficient context for those unfamiliar with the subject. Please help by providing more context for the reader. (May 2015) (Learn how and when to remove this template message) This article needs additional citations for verification. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (October 2008) (Learn how and when to remove this template message) (Learn how and when to remove this template message)

One of the key challenges of the cognitive radio based wireless networks, such as IEEE 802.22 wireless regional area networks (WRAN),^[1] is to address two apparently conflicting requirements: assuring Quality of Services (QoS) satisfaction for services provided by the cognitive radio networks, while providing reliable spectrum sensing for guaranteeing licensed user protection. To perform reliable sensing, in the basic operation mode on a single frequency band (the so-called "listenbefore-talk" mode) one has to allocate Quiet Times, in which no data transmission is permitted. Such periodic interruption of data transmission could impair the QoS of cognitive radio systems.

This issue is addressed by an alternative operation mode proposed in IEEE 802.22 called Dynamic Frequency Hopping (DFH)^[2] where data transmission of the WRAN systems are performed in parallel with spectrum sensing without any interruption.

References[]