Electrochemical AFM

From Wikipedia, the free encyclopedia

Electrochemical AFM (EC-AFM) is a particular type of Scanning probe microscopy (SPM), which combines the classical Atomic force microscopy (AFM) together with electrochemical measurements. EC-AFM allows to perform in-situ AFM measurements in an electrochemical cell, in order to investigate the actual changes in the electrode surface morphology during electrochemical reactions. The solid-liquid interface is thus investigated.[1] This technique was developed for the first time in 1996 by Kouzeki et al.,[2] who studied amorphous and polycrystalline thin films of Naphthalocyanine on Indium tin oxide in a solution of 0.1 M Potassium chloride (KCl). Unlike the Electrochemical scanning tunneling microscope, previously developed by Itaya and Tomita in 1988,[3] the tip is non-conductive and it is easily steered in a liquid environment.

Principles and experimental precautions[]

The technique consists in an AFM apparatus integrated with a three electrode electrochemical cell.

Schematic of the electrochemical cell.
Electrochemical AFM section.
(a) Cantilever and tip
(b) electrochemical cell
(c) Liquid (electrolyte)
(d) sample
(e) Sample holder. The electrochemical connections are usually placed under the sample holder.

The sample works as working electrode (WE) and must be conductive. The AFM probe is a "passive" element, as it is unbiased and it monitors the surface changes as a function of time, when a potential is applied to the sample. Several electrochemical experiments can be performed on the sample, such as cyclic voltammetry, pulse voltammetry etc. During the potential sweeping, the current flows through the sample and the morphology is monitored.[4]

The electrochemical cell is made of a plastic material resistant to various chemical solvents (e.g. sulfuric acid, perchloric acid etc.), with a good mechanical resistance and low fabrication costs.[5] In order to satisfy these requirements, various materials can be employed, such as polytetrafluoroethylene (PTFE) or teflon. Platinum and AgCl wires are widely employed as reference electrode and platinum wires as counter electrode.

Since the measurement is performed in a liquid environment, some precautions must be taken. The chosen electrolyte must be transparent, in order to allow the laser beam to reach the sample and be deflected. For the right electrolyte opacity, depending on the solute concentration, very diluted solutions should be selected. The choice of a suitable electrolyte for the measurement must be taken considering also possible corrosion effects on the AFM scanner, which can be affected by strong acid solutions. The same problem affects the AFM cantilever. It is preferable to select an AFM tip with a specific coating resistant to acids, for example gold. The liquid environment adds one more constraint related to the choice of the tip material, as the laser sum registered on the photodiode must be scarcely affected. The change in the refractive index of the solution with respect to air leads to a change in the position of the laser spot, necessitating a repositioning of the photodiode.

Applications[]

EC-AFM has various applications, where monitoring the electrode surface during electrochemical reactions leads to interesting results. Among the applications, the studies on battery and electrode corrosion in acid environment are widely spread. Concerning batteries, studies on lead–acid battery pointed out the change in the morphology during the reduction/oxidation cycles in a CV, when an acid electrolyted is used.[6][7] Different corrosion effects are widely considered for the applications of EC-AFM. Different phenomena are studies, from pitting corrosion of steel,[8] to crystal dissolution.[9] Highly oriented pyrolytic graphite (HOPG) is widely employed as an electrode for EC-AFM. In fact, various surface phenomena are studied, from the application to lithium batteries[10] to anion intercalation leading to blister formation on the electrode surface.[11] A rather interesting application is the EC-AFM Dip pen nanolithography.[12] Recently, SPM based lithography gained attention due to its simplicity and precise control the structure and location. A new development of this technique is the dip pen nanolithography (DPN), which uses the AFM technique to deliver organic molecules on different substrates, as gold. Using EC-AFM allows to fabricate metal and semiconductor nanostructures on the WE, gaining high thermal stability and a higher chemical diversity. Finally, it is possible to perform and study the electrodeposition of different materials on electrodes, from metals (i.e. copper[13]) to polymers, such as polyaniline (PANI).[14][15]

References[]

  1. ^ Toma, Francesca M.; Cooper, Jason K.; Kunzelmann, Viktoria; McDowell, Matthew T.; Yu, Jie; Larson, David M.; Borys, Nicholas J.; Abelyan, Christine; Beeman, Jeffrey W.; Yu, Kin Man; Yang, Jinhui; Chen, Le; Shaner, Matthew R.; Spurgeon, Joshua; Houle, Frances A.; Persson, Kristin A.; Sharp, Ian D. (5 July 2016). "Mechanistic insights into chemical and photochemical transformations of bismuth vanadate photoanodes". Nature Communications. 7: 12012. doi:10.1038/ncomms12012. PMC 4935965. PMID 27377305.
  2. ^ Kouzeki, Takashi; Tatezono, Shinya; Yanagi, Hisao (January 1996). "Electrochromism of Orientation-Controlled Naphthalocyanine Thin Films". The Journal of Physical Chemistry. 100 (51): 20097–20102. doi:10.1021/jp962307j.
  3. ^ Itaya, Kingo; Tomita, Eisuke (July 1988). "Scanning tunneling microscope for electrochemistry - a new concept for the in situ scanning tunneling microscope in electrolyte solutions". Surface Science. 201 (3): L507–L512. doi:10.1016/0039-6028(88)90489-X.
  4. ^ Reggente, Melania; Passeri, Daniele; Rossi, Marco; Tamburri, Emanuela; Terranova, Maria Letizia (2017). "Electrochemical atomic force microscopy: In situ monitoring of electrochemical processes". AIP Conference Proceedings. 1873. Author(s): 020009. doi:10.1063/1.4997138. Cite journal requires |journal= (help)
  5. ^ DuPont Fluoroproducts (1996). Teflon Ptfe Fluoropolymer Resin: Properties Handbook. Paperback.
  6. ^ Yamaguchi, Yoshiaki; Shiota, Masashi; Nakayama, Yasuhide; Hirai, Nobumitsu; Hara, Shigeta (February 2001). "Combined in situ EC-AFM and CV measurement study on lead electrode for lead–acid batteries". Journal of Power Sources. 93 (1–2): 104–111. doi:10.1016/S0378-7753(00)00554-1.
  7. ^ Shiota, Masashi; Yamaguchi, Yoshiaki; Nakayama, Yasuhide; Hirai, Nobumitsu; Hara, Shigeta (January 2003). "In situ EC-AFM observation of antimony effect for lead dioxide electrode". Journal of Power Sources. 113 (2): 277–280. doi:10.1016/S0378-7753(02)00523-2.
  8. ^ Reynaud-Laporte, Isabelle; Vayer, Marylène; Kauffmann, Jean-Pierre; Erre, René (1997). "An Electrochemical-AFM Study of the Initiation of the Pitting Corrosion of a Martensitic Stainless Steel". Microscopy Microanalysis Microstructures. 8 (3): 175–185. doi:10.1051/mmm:1997117.
  9. ^ Macpherson, Julie V.; Unwin, Patrick R.; Hillier, Andrew C.; Bard, Allen J. (January 1996). "In-Situ Imaging of Ionic Crystal Dissolution Using an Integrated Electrochemical/AFM Probe". Journal of the American Chemical Society. 118 (27): 6445–6452. doi:10.1021/ja960842r. ISSN 0002-7863.
  10. ^ Domi, Y.; Ochida, M.; Tsubouchi, S.; Nakagawa, H.; Yamanaka, T.; Doi, T.; Abe, T.; Ogumi, Z. (20 July 2012). "Electrochemical AFM Observation of the HOPG Edge Plane in Ethylene Carbonate-Based Electrolytes Containing Film-Forming Additives". Journal of the Electrochemical Society. 159 (8): A1292–A1297. doi:10.1149/2.059208jes.
  11. ^ Bussetti, Gianlorenzo; Yivlialin, Rossella; Alliata, Dario; Li Bassi, Andrea; Castiglioni, Chiara; Tommasini, Matteo; Casari, Carlo Spartaco; Passoni, Matteo; Biagioni, Paolo; Ciccacci, Franco; Duò, Lamberto (10 March 2016). "Disclosing the Early Stages of Electrochemical Anion Intercalation in Graphite by a Combined Atomic Force Microscopy/Scanning Tunneling Microscopy Approach". The Journal of Physical Chemistry C. 120 (11): 6088–6093. doi:10.1021/acs.jpcc.6b00407. hdl:11311/981354.
  12. ^ Li, Yan; Maynor, Benjamin W.; Liu, Jie (March 2001). "Electrochemical AFM "Dip-Pen" Nanolithography". Journal of the American Chemical Society. 123 (9): 2105–2106. doi:10.1021/ja005654m.
  13. ^ Koinuma, M.; Uosaki, K. (July 1995). "An electrochemical AFM study on electrodeposition of copper on p-GaAs(100) surface in HCl solution". Electrochimica Acta. 40 (10): 1345–1351. doi:10.1016/0013-4686(95)00070-U.
  14. ^ Singh, Pankaj R.; Mahajan, Sumeet; Rajwade, Shantanu; Contractor, A.Q. (January 2009). "EC-AFM investigation of reversible volume changes with electrode potential in polyaniline". Journal of Electroanalytical Chemistry. 625 (1): 16–26. doi:10.1016/j.jelechem.2008.10.005.
  15. ^ Reggente, Melania; Passeri, Daniele; Rossi, Marco; Tamburri, Emanuela; Terranova, Maria Letizia (2017). "Electrochemical atomic force microscopy: In situ monitoring of electrochemical processes". AIP Conference Proceedings. 1873. Author(s): 020009. doi:10.1063/1.4997138. Cite journal requires |journal= (help)
Retrieved from ""