Firefly Balloons

From Wikipedia, the free encyclopedia

FireFly Balloons
TypePrivate company
IndustryAerospace
Founded1972
HeadquartersStatesville, North Carolina, United States
Key people
Tracy Barnes (founder)
ProductsHot air balloons
Websitewww.fireflyballoons.net
A FireFly 7 Balloon of 77,000 Cu Ft

FireFly Balloons is an American hot air balloon manufacturer that started as The Balloon Works (TBW) in 1972 in Statesville, NC. The company is one of the oldest hot air balloon manufacturers in the United States, behind Raven Industries (founded by Ed Yost), and Piccard Balloons.[1] The origins of the company's designs can be traced to the work of Tracy Barnes in the late 1960s.[2]

Design and development[]

Tracy Barnes' designs introduced many of the features found in modern hot air balloons.[2]

The parachute top, which replaced spring tops, explosive tops and inverting envelopes used previously, did much to improve the safety and maneuverability of balloons. Additionally, the T-3 burner offered a modern and high-powered burner with redundant capability in the event of a primary burner failure, in the form of the "Fire 2" jet.[3]

Barnes introduced the distinctive zig-zag envelope to reduce fabric waste and the use of glossy, heat resistant polyester instead of nylon for envelopes. This material choice resulted in a higher maximum envelope temperature of 300 degrees Fahrenheit.[3][4] Barnes also designed a distinctive triangular basket to offer increased volume, tipping resistance and corner stowage of three fuel tanks. Barnes' most significant contribution was in drastically simplifying venting and deflation by inventing the parachute top. Later Barnes would invent the FlexNet Envelope, which prevented the possibility of envelope tears growing beyond a single panel. The type certificates issued to The Balloon Works are still the basis of the popular line of balloons produced by FireFly Balloons. Often, early balloons manufactured by the company are referred to as "Barnes" balloons, however this was never the actual company name. The company's name from 2000 on has been FireFly Balloons.[4]

Tracy Barnes is no longer directly involved with FireFly, instead he presently works on unmanned and advertising blimps through his company .[4]

Among the characteristic design features of FireFly balloons are:

  • Triangular baskets[4][5]
  • Zig-zag (or chevron) patterned envelope gores[4][6]
  • Toggle and loop envelope fasteners[3]
  • maXflite silicone coated rip-stop Nylon is now used in envelopes,[6] Polyester was used in older systems.[3][4]
  • Bulbous gores[4]
The open Parachute Top in a FireFly 7 Balloon as viewed during deflation

References[]

  1. ^ "National Balloon Museum Hot Air Balloon History". Archived from the original on 31 August 2010. Retrieved 9 June 2010.
  2. ^ a b "Barnes". Retrieved 9 June 2010.
  3. ^ a b c d "FireFly 7 Flight Manual" (PDF). Retrieved 9 June 2010.
  4. ^ a b c d e f g "History of Ballooning - Barnes". Retrieved 22 October 2011.
  5. ^ "About FireFly Baskets". Retrieved 22 October 2011.
  6. ^ a b "About FireFly Envelopes". Retrieved 22 October 2011.

External links[]

Retrieved from ""