Flow Hive

The neutrality of this article is disputed. Relevant discussion may be found on the talk page. Please do not remove this message until conditions to do so are met. (May 2020) (Learn how and when to remove this template message)

Flow Hive

Type	Privately held company
Industry	Beekeeping
Founded	Byron Bay, Australia 2015
Headquarters	Byron Bay, Australia
Area served	Worldwide
Key people	Cedar Anderson, Stuart Anderson
Products	Flow Hive
Brands	Flow Hive, Flow, Flow Frames
Parent	BeeInventive Pty. Ltd.
Website	https://www.honeyflow.com

Schematic showing the way that the flow hive cells offset during honey collection, allowing honey to flow freely.

Flow Hive is a beehive designed to allow honey to be extracted simply by turning a knob: the hive does not have to be opened and the bees are not disturbed as in normal extraction.

The frames contain a partially-formed plastic honeycomb silicone with vertical gaps. Bees fill in these gaps with beeswax and the cells with honey. When the mechanism of the frames is activated, the vertical gaps are offset by one half of a cell, breaking the wax covering and allowing the honey to flow down through the cells into a channel at the base of each frame and out into a collection vessel.^[1] The system is then reset and the bees remove the capping and refill the cells, beginning the process again.^[1] Some critics question the use of plastic,^{[not verified in body]} although plastic foundation is commonly used in conventional beekeeping. The Flow Hive uses a BPA and BPS free plastic, allowing the bees to produce their own natural wax comb in the brood nest.

The design was copied by Chinese (US-registered shell company) TapComb.^[2] Co-inventor Cedar Anderson said this copy clearly infringed on their patents, which cover all designs that have split cells to drain honey.^[2] TapComb ceased trading in late 2018.^[3]

Crowdfunding campaigns[]

The Flow Hive system was invented in Australia by Cedar Anderson and his father Stuart Anderson. In February 2015, they launched a campaign on crowdfunding platform Indiegogo hoping to raise $70,000 for a custom injection mould. Instead, they raised over $12 million and received nearly 25,000 orders from over 130 countries.^[4] The campaign broke several records for Indiegogo, becoming its most successful campaign as of that time..^[5] By March 2018, 51,000 orders had been shipped.^[6]

The Flow Hive 2, which included a number of small improvements, was launched via another crowdfunding campaign in early 2018.^[7] The second campaign raised $1.1 million.^{[8][needs update]}

Market reaction[]

There were speculative criticisms of the design made by beekeeping journalists and bloggers during the first Indiegogo campaign.^[9]

• Use of plastic comb: Some^[who?] have criticized the use of plastic combs in the Flow Hive; however, plastic foundations are commonly used in conventional beekeeping today. In addition the Flow Hive uses a food-certified plastic in the honey super only which allows the bees to produce their own natural wax comb in the brood nest. This also allows for a healthy blend of traditional and modernized beekeeping as well as maintaining a food safe system.^{[citation needed]}
• Crystallization: Especially in colder climates, honey can thicken or crystallize, preventing honey from flowing.^[9] If this prevents operation of the Flow Hive mechanism, it can be addressed by either waiting for the bees to remove the crystallized honey, or by soaking the frame in water to dissolve it away.^[10]
• Promotion as 'honey on tap': In the first advertisements for the Flow Hive, it was marketed as a way to remove honey "without disturbing the bees". Many experienced beekeepers took issue with this, as they said it promoted a lack of maintenance of hives. Bee hives require regular maintenance and observation to check for diseases and other problems that might arise. Cedar Anderson responded to the criticism, changing the way that the Flow Hive was marketed, and specifying that all that changes with the Flow Hive system is the process of harvesting of honey, and that the rest of the beekeeping process should remain the same.^[11][12][13]

In 2016, while some beekeepers were critical,^[11] others noted that the Flow Hive would simplify the arduous practice of extracting honey, especially for small beekeepers because expensive extraction equipment (centrifuge, filters) would not be required.^{[14][needs update]}

It also seems to be a good starting point for new beekeepers^{[according to whom?]} as it simplifies collection and as noted, saves on costs.^{[citation needed]}

Impact on amateur beekeeping[]

In Australia, a rapid increase in new members joining existing beekeeping clubs in 2017, the capping of new memberships by some clubs and the establishment of at least one new club were attributed to the Flow Hive.^[15]

• 

  Australian made flow hive with brood box and characteristic sloped roof

• 

  Beekeeper next to a flow hive

References[]