Force-free magnetic field

A force-free magnetic field is a magnetic field that arises when the plasma pressure is so small, relative to the magnetic pressure, that the plasma pressure may be ignored, and so only the magnetic pressure is considered. For a force free field, the electric current density is either zero or parallel to the magnetic field. The name "force-free" comes from being able to neglect the force from the plasma.

Basic equations[]

Neglecting the effects of gravity, the Navier–Stokes equation for a plasma, in steady state, reads

${\displaystyle 0=-\nabla p+\mathbf {j} \times \mathbf {B} ,}$

where ${\displaystyle p}$ is the thermal pressure, ${\displaystyle \mathbf {B} }$ is the magnetic field and ${\displaystyle \mathbf {j} }$ is the electric current. Assuming that the gas pressure ${\displaystyle p}$ is small compared to the magnetic pressure, i.e.,

${\displaystyle p\ll B^{2}/2\mu }$

then the pressure term can be neglected. Here ${\displaystyle \mu }$ is the magnetic permeability of the plasma. Therefore,

${\displaystyle \mathbf {j} \times \mathbf {B} =0}$.

This equation implies that: ${\displaystyle \mu _{0}\mathbf {j} =\alpha \mathbf {B} }$. e.g. the current density is either zero or parallel to the magnetic field, and where ${\displaystyle \alpha }$ is a spatial-varying function to be determined. Combining this equation with Maxwell's equations:

${\displaystyle \nabla \times \mathbf {B} =\mu \mathbf {j} }$

${\displaystyle \nabla \cdot \mathbf {B} =0}$

and the vector identity:

${\displaystyle \nabla \cdot (\nabla \times \mathbf {B} )=0}$

leads to a pair of equations for ${\displaystyle \alpha }$ and ${\displaystyle \mathbf {B} }$:

${\displaystyle \mathbf {B} \cdot \nabla \alpha =0,}$

${\displaystyle \nabla \times \mathbf {B} =\alpha \mathbf {B} .}$

Physical examples[]

In the corona of the Sun, the ratio of the gas pressure to the magnetic pressure can locally be of order 0.01 or lower, and in these regions the magnetic field can be described as force-free.

Mathematical limits[]

• If the current density is identically zero, then the magnetic field is potential, i.e. the gradient of a scalar magnetic potential.

In particular, if ${\displaystyle \mathbf {j} =0}$

then ${\displaystyle \nabla \times \mathbf {B} =0}$ which implies that ${\displaystyle \mathbf {B} =\nabla \phi }$.

The substitution of this into one of Maxwell's equations, ${\displaystyle \nabla \cdot \mathbf {B} =0}$, results in Laplace's equation,

${\displaystyle \nabla ^{2}\phi =0}$,

which can often be readily solved, depending on the precise boundary conditions.

This limit is usually referred to as the potential field case.

• If the current density is not zero, then it must be parallel to the magnetic field, i.e.,

${\displaystyle \mu \mathbf {j} =\alpha \mathbf {B} }$ which implies that ${\displaystyle \nabla \times \mathbf {B} =\alpha \mathbf {B} }$, where ${\displaystyle \alpha }$ is some scalar function.

then we have, from above,

${\displaystyle \mathbf {B} \cdot \nabla \alpha =0}$

${\displaystyle \nabla \times \mathbf {B} =\alpha \mathbf {B} }$ , which implies that

${\displaystyle \nabla \times (\nabla \times \mathbf {B} )=\nabla \times (\alpha \mathbf {B} )}$

There are then two cases:

Case 1: The proportionality between the current density and the magnetic field is constant everywhere .

${\displaystyle \nabla \times (\alpha \mathbf {B} )=\alpha (\nabla \times \mathbf {B} )=\alpha ^{2}\mathbf {B} }$

and also

${\displaystyle \nabla \times (\nabla \times \mathbf {B} )=\nabla (\nabla \cdot \mathbf {B} )-\nabla ^{2}\mathbf {B} =-\nabla ^{2}\mathbf {B} }$,

and so

${\displaystyle -\nabla ^{2}\mathbf {B} =\alpha ^{2}\mathbf {B} }$

This is a Helmholtz equation.

Case 2: The proportionality between the current density and the magnetic field is a function of position.

${\displaystyle \nabla \times (\alpha \mathbf {B} )=\alpha (\nabla \times \mathbf {B} )+\nabla \alpha \times \mathbf {B} =\alpha ^{2}\mathbf {B} +\nabla \alpha \times \mathbf {B} }$

and so the result is coupled equations:

${\displaystyle \nabla ^{2}\mathbf {B} +\alpha ^{2}\mathbf {B} =\mathbf {B} \times \nabla \alpha }$

and

${\displaystyle \mathbf {B} \cdot \nabla \alpha =0}$

In this case, the equations do not possess a general solution, and usually must be solved numerically.

See also[]

• Laplace's equation
• Helmholtz equation

References[]

• Low, Boon Chye, "Force-Free Magnetic Fields^{[permanent dead link]}". November 2000.