Hangprinter
![]() Hangprinter version 3 | |
Video about the Hangprinter | |
Classification | Fused deposition modeling 3D printer |
---|---|
Inventor | Torbjørn Ludvigsen |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e0/Hangprinter_4_meter_tower.jpg/220px-Hangprinter_4_meter_tower.jpg)
Hangprinter is an open-source fused deposition modeling delta 3D printer notable for its unique frameless design. It was created by Torbjørn Ludvigsen. The Hangprinter uses relatively low cost parts and can be constructed for around US$250.[1][2][3][4] The printer is part of the RepRap project, meaning many of the parts of the printer are able to be produced on the printer itself (partially self replicating). The design files for the printer are available on GitHub for download, modification and redistribution.[5]
Versions[]
Version 0[]
The Hangprinter v0, also called the Slideprinter, is a 2D plotter. It was designed solely to test if a 3D version could realistically be created.[6]
Hangprinter v0
Version 1[]
The Hangprinter v1 uses counter weights to stay elevated.[7]
Hangprinter v1. Counterweights tied in at its center cylinder.
Version 2[]
All parts of the Hangprinter Version 2 are contained within a single unit which uses cables to suspend the printer within a room, allowing it to create extremely large objects over 4 meters tall.[1][2][3][4]
Version 3[]
Version 3 of the Hangprinter has the motors and gears attached to the ceiling, making the carriage lighter.[8]
Hangprinter printing at the offices of E3D Online
Adrian Bowyer with a Hangprinter
Hangprinter v3 suspended
Close up of Hangprinter v3 printing
View of entire carriage whilst printing
Components of the Hangprinter V3. The red parts and the white parts in the blue box are 3D printed.
Version 4[]
Version 4 includes upgrades from version 3 including flex compensation, better calibration and automatic homing.[9]
Two 3DBenchys being printed on a Hangprinter
External links[]
Development[]
- The Hangprinter Project's Webpage
- Torbjørn Ludvigsen's RepRap blog
- Hangprinter on Bountysource
- Hangprinter Facebook page
Repositories[]
Videos[]
- Hangprinter presentation, Torbjørn Ludvigsen
- The Hangprinter #3DMeetup, , YouTube
- RepRap HangPrinter Workshop at with , , YouTube
References[]
- ^ a b "Frameless 'Hangprinter' RepRap turns an entire room into a 3D printer". 3ders.org. Retrieved 2017-03-19.
- ^ a b "The Hangprinter: A Frameless 3D Printer". Fabbaloo. Retrieved 2017-03-19.
- ^ a b "Interview with the inventor of the frameless Hangprinter 3D printer building the Tower of Babel". 3D Printing Industry. Retrieved 2017-03-19.
- ^ a b By. "Hanging 3D Printer Uses Entire Room As Print Bed". Hackaday. Retrieved 2017-03-20.
- ^ "tobbelobb/hangprinter". GitHub. Retrieved 2017-04-08.
- ^ Ludvigsen, Torbjørn. "The Slideprinter". Torbjørn's RepRap Blog. Torbjørn Ludvigsen. Retrieved 21 May 2018.
- ^ Ludvigsen, Torbjørn. "First Finished Print". Torbjørn's RepRap Blog. Torbjørn Ludvigsen. Retrieved 22 Sep 2020.
- ^ "Hangprinter Build Videos". Hackaday. 2017-12-16. Retrieved 2018-05-21.
- ^ "Torbjørn's Reprap blog". torbjornludvigsen.com. Torbjørn Ludvigsen. Retrieved 2020-09-22.
- 3D printers
- Delta robots
- RepRap project