MSDOS.SYS
MSDOS.SYS is a system file in MS-DOS and Windows 9x operating systems.
In versions of MS-DOS from 1.1x through 6.22, the file comprises the MS-DOS kernel and is responsible for file access and program management. MSDOS.SYS
is loaded by the DOS BIOS IO.SYS
as part of the boot procedure.[1] In some OEM versions of MS-DOS, the file is named MSDOS.COM
.
In Windows 95 (MS-DOS 7.0) through Windows ME (MS-DOS 8.0), the DOS kernel has been combined with the DOS BIOS into a single file, IO.SYS
(aka WINBOOT.SYS
[2]), while MSDOS.SYS
became a plain text file containing boot configuration directives instead. If a WINBOOT.INI
file exists, the system will retrieve these configuration directives from WINBOOT.INI
rather than from MSDOS.SYS
.[3]
When Windows 9x is installed over a preexisting DOS install, the Windows file may be temporarily named MSDOS.W40
for as long as Windows' dual-boot feature has booted the previous OS. Likewise, the MSDOS.SYS
of the older system is named MSDOS.DOS
for as long as Windows 9x is active.
Some DOS utilities expect the MSDOS.SYS
file to have a minimal file size of at least 1 KB. This is the reason why a large dummy comment is typically found in the MSDOS.SYS
configuration file since Windows 95.[nb 1][4][5][6]
By default, the file is located in the root directory of the bootable drive/partition (normally C:\
for hard disks) and has the hidden, read-only, and system file attributes set.
The MS-DOS derivative Disk Control Program (DCP) by the former East-German VEB Robotron used a DCDOS.SYS filename instead.[7][8]
IBM PC DOS as well as DR DOS since 5.0 (with the exception of DR-DOS 7.06) used the file IBMDOS.COM
for the same purpose, whereas DR DOS 3.31 to 3.41 used DRBDOS.SYS
instead.[2] FreeDOS uses the file KERNEL.SYS
for the same purpose.
Windows NT-based operating systems (NT 3.1–4, 2000, XP, and 2003) use the NTLDR file and NT 6+ operating systems (Vista, 2008, 7, 8, 8.1, and 10) use bootmgr instead, as they have a different boot sequence.
See also[]
Notes[]
- ^ The dummy comment in unmodified copies of
MSDOS.SYS
explains these reasons explicitly:The following lines are required for compatibility with other programs. Do not remove them (MSDOS.SYS needs to be >1024 bytes).
References[]
- ^ Robbins, Judd (1991). Mastering DOS 5 (3 ed.). San Francisco, California: Sybex. pp. 68–69.
- ^ a b Paul, Matthias R. (1997-10-02) [1997-09-29]. "Caldera OpenDOS 7.01/7.02 Update Alpha 3 IBMBIO.COM - README.TXT and BOOT.TXT - A short description of how OpenDOS is booted". Archived from the original on 2003-10-04. Retrieved 2009-03-29. [1] (NB. Also has a few bits on how other DOSes are booted.)
- ^ "Windows Does Not Start Normally With Bootgui=1 in the Msdos.sys". 2.0. Microsoft. 2013-10-24. KB136416, Q136416. Retrieved 2015-08-20.
- ^ "Contents of the Windows MSDOS.SYS file". 1.4. Microsoft. 2007-01-19. KB118579, Q118579. Retrieved 2015-08-20.
- ^ "How to create an MSDOS.SYS file larger than 1024 bytes". 1.3. Microsoft. 2004-12-21. KB129998, D36528. Retrieved 2014-11-22.
- ^ Wolking, Gregory A. (1996-09-24). "BootOpt Gives You Start-Up Control - A GUI interface makes it easier to set Windows 95's startup options". PC Magazine. pp. 222–230. Retrieved 2019-07-27.
- ^ Anwenderdokumentation - Anleitung für den Systemprogrammierer - MOS DCP 1700 (PDF). 3.20 (in German). Dresden, East-Germany: VEB Robotron-Projekt Dresden. 1988-01-29. C3013-0000-0 M3030, Textdiskette DCP1700 T1/2 C3010-9991-2M3020, Disk-Nr.: 5962 /88 ROBOTRON PROJEKT DRESDEN KA2 DD-DS 80*16*256. Archived (PDF) from the original on 2021-08-29. Retrieved 2021-12-03.
- ^ Kurth, Rüdiger; Groß, Martin; Hunger, Henry (2016-11-29) [2007]. "Betriebssystem DCP". www.robotrontechnik.de (in German). Archived from the original on 2019-04-03. Retrieved 2019-04-28.
External links[]
MSDOS.SYS in Windows 9x (95/98/ME):
- Microsoft Knowledge Base (MSKB): List of MSDOS.SYS articles
- MDGx: Windows 95/98/ME Complete MSDOS.SYS Reference
- UKT Support: Contents of the MSDOS.SYS File
- Computer Hope: Information about Window MSDOS.SYS file
- MDGx: WINBOOT.INI
- DOS kernel
- DOS files
- DOS configuration files