MS Carolinian
For first all-welded hull, see .
![]() M/S Carolinian prior to launch, Charleston Dry Dock & Machine Co.
| |
History | |
---|---|
United States | |
Name | Carolinian |
Namesake | Demonym of "Carolina" |
Owner | M. L. Clark |
Operator | The Texas Company (Texaco) |
Route | Elizabeth City, N.C. and adjacent ports. |
Builder | Charleston Dry Dock & Machine Company |
Laid down | Around July, 1929 |
Launched | February 14, 1930 |
Completed | March 9, 1930 |
Maiden voyage | From Charleston, April, 1930 |
Homeport | Elizabeth City, North Carolina |
Notes | Designed by R. F. Smith, naval architect. |
General characteristics | |
Type | Coastal Tanker |
Tonnage | 226 tons |
Displacement | 440 tons (loaded) |
Length | 120 ft. |
Beam | 23 ft. |
Draft | 8.5 ft. (loaded) |
Depth | 10 ft. |
Installed power | (1x) Fairbanks-Morse 6 cyl. marine diesel engine, 10-inch cylinder dia., 12.5-inch stroke. 180 shp at 400 rpm. |
Propulsion | Single Screw |
Speed | 11.5 knots |
Boats & landing craft carried | 1(?) |
Capacity | 125,000 U.S. gallons |
Crew | 4(?) |
Notes | Coastwise Trade, R.F. Smith-patented Lock Notch Welded System |
The M/S Carolinian was the first entirely-welded commercial vessel in the world. She was completed in March of 1930 in Charleston, South Carolina.[1] Built by Charleston Dry Dock & Machine Company, she was a 226-ton tanker[2] designed for coastal shipping. Miles L. Clark is a known owner, with Texaco as the operator (notice the insignia on her stack prior to launch). The ship took about nine months to complete from the time her keel was laid.[3] As denoted by the prefix M/S, the vessel also had an internal combustion main engine.[4] Welded construction and internal combustion engines are staples in modern shipbuilding, allowing the Carolinian to be the first truly modern merchant ship.[5]
Richard F. Smith, the designer, created the lock notch welded system. Charleston Dry Dock & Machine was the sole licensee.[6] The design consisted of steel plates with notches that allowed easy fit-up and welding. Only nine workmen were required to assemble the hull. This design saved one-quarter of the cost, and 85,000-lbs of rivets. The welding required a mere 8,000-lbs of welding wire by comparison.[7]
During the shakedown cruise on March 8, she made 11.5 knots heading out to sea, beyond Fort Sumter.[3] The success of the Carolinian's maiden voyage the following month, and two flawless subsequent dry-dock inspections spurred an "estimate" for six orders of similar ships in 1931.[8][9]
On March 9, 1934, the Carolinian rescued four fishermen from a squall near Elizabeth City, North Carolina, the hompeort of this vessel.[10] She was under the command of Captain E. R. Outlaw.[11]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/6b/Carolinian_II.jpg/220px-Carolinian_II.jpg)
The vessel was later purchased by Pine State By-Products of South Portland, Maine. It was converted into a barge later in its career, and remained in the Register into the early-1980s.[12]
References[]
- ^ "A History of Welding". WeldingHistory.org. Retrieved 11 November 2015.
- ^ Colton, Tim. "Charleston Shipbuilding, Charleston, SC". ShipBuildingHistory.com. Archived from the original on 18 October 2015. Retrieved 11 November 2015.
- ^ a b Smith, Alexander Rogers (1930-01-01). The Port of New York, and Ship News. Port of New York publicity Company.
- ^ Marine Review. Penton Publishing Company. 1931-01-01.
- ^ "Science: Welded Steamer". TIME. Time Magazine. Retrieved 11 November 2015.
- ^ Marine Review. Penton Publishing Company. 1931.
- ^ Corporation, Bonnier (June 1930). Popular Science. Bonnier Corporation.
- ^ Technology Review. Association of Alumni and Alumnae of the Massachusetts Institute of Technology. 1931-01-01.
- ^ "Joseph Gideon Meekins (1892–1997) – Find A Grave Memorial". www.findagrave.com. Retrieved 2015-11-12.
- ^ Simpson, Bland (2007-09-06). The Inner Islands: A Carolinian's Sound Country Chronicle. Chapel Hill, NC: Univ of North Carolina Press. pp. 2–3. ISBN 9780807876749.
- ^ "The Spartanburg Herald". Newspaper. March 10, 1934. Retrieved 11 November 2015 – via Google News.
- ^ Guard, United States Coast (1976). Merchant Vessels of the United States...: (including Yachts). U.S. Government Printing Office.
- 1930 ships
- Ships built in Charleston, South Carolina
- Merchant ships of the United States
- Welding