Mark Levinson ML-3
This article needs additional citations for verification. (February 2022) |
The Mark Levinson ML-3 was a 200 watt per channel dual monaural[1] Class AB2 power amplifier that used toroidal transformers. Produced between 1979 and 1987, the ML-3 consisted of two electrically separate amplifiers in one chassis, hence the name "Dual Monaural". It also featured discrete circuit construction; no integrated circuits were incorporated to keep the signal pure. The design was by Thomas P. Colangelo.
The ML-3 constituted the archetype of an American highend, highpower amplifier.
Specifications[]
- 200 W/channel at 8 ohms,[1] 400 W/ch at 4 ohms, 800 W/ch at 2 ohms
- Maximum output: 45 volts 30 amperes
- Two 1.2 kVA toroidal transformers, 4 Sprague 36,000 µF, 100 V capacitors and 40 output devices (20 per channel)
- Range: 20 Hz to 20 kHz with less than 0.2% total harmonic distortion
- Gold-plated CAMAC input connectors
- Adjustable AC voltage: No, factory set
- Adjustable output damping toggle switches (one per channel) (in later models only)
- Weight: 116 lb (56 kg)[1]
External links[]
References[]
- ^ a b c https://www.marklev.com/2014/04/ml-3-2-x-200w-amplifier-1979-1987.html, retrieved 10 February 2021.
Categories:
- Audio amplifiers