Mean absolute percentage error

This article needs additional citations for verification. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (December 2009) (Learn how and when to remove this template message)

The mean absolute percentage error (MAPE), also known as mean absolute percentage deviation (MAPD), is a measure of prediction accuracy of a forecasting method in statistics. It usually expresses the accuracy as a ratio defined by the formula:

${\displaystyle {\mbox{MAPE}}={\frac {100\%}{n}}\sum _{t=1}^{n}\left|{\frac {A_{t}-F_{t}}{A_{t}}}\right|}$

where A_t is the actual value and F_t is the forecast value. Their difference is divided by the actual value A_t. The absolute value in this ratio is summed for every forecasted point in time and divided by the number of fitted points n.

MAPE in regression problems[]

Mean absolute percentage error is commonly used as a loss function for regression problems and in model evaluation, because of its very intuitive interpretation in terms of relative error.

Definition[]

Consider a standard regression setting in which the data are fully described by a random pair ${\displaystyle Z=(X,Y)}$ with values in ${\displaystyle \mathbb {R} ^{d}\times \mathbb {R} }$, and n i.i.d. copies ${\displaystyle (X_{1},Y_{1}),...,(X_{n},Y_{n})}$ of ${\displaystyle (X,Y)}$. Regression models aims at finding a good model for the pair, that is a measurable function g from ${\displaystyle \mathbb {R} ^{d}}$ to ${\displaystyle \mathbb {R} }$ such that ${\displaystyle g(X)}$ is close to Y.

In the classical regression setting, the closeness of ${\displaystyle g(X)}$ to Y is measured via the L₂ risk, also called the mean squared error (MSE). In the MAPE regression context,^[1] the closeness of ${\displaystyle g(X)}$ to Y is measured via the MAPE, and the aim of MAPE regressions is to find a model ${\displaystyle g_{\text{MAPE}}}$ such that:

${\displaystyle g_{\text{MAPE}}(x)=\arg \min _{g\in {\mathcal {G}}}\mathbb {E} \left[\left|{\frac {g(X)-Y}{Y}}\right||X=x\right]}$

where ${\displaystyle {\mathcal {G}}}$ is the class of models considered (e.g. linear models).

In practice

In practice ${\displaystyle g_{\text{MAPE}}(x)}$ can be estimated by the empirical risk minimization strategy, leading to

${\displaystyle {\widehat {g}}_{\text{MAPE}}(x)=\arg \min _{g\in {\mathcal {G}}}\sum _{i=1}^{n}\left|{\frac {g(X_{i})-Y_{i}}{Y_{i}}}\right|}$

From a practical point of view, the use of the MAPE as a quality function for regression model is equivalent to doing weighted mean absolute error (MAE) regression, also known as quantile regression. This property is trivial since

${\displaystyle {\widehat {g}}_{\text{MAPE}}(x)=\arg \min _{g\in {\mathcal {G}}}\sum _{i=1}^{n}\omega (Y_{i})\left|g(X_{i})-Y_{i}\right|{\mbox{ with }}\omega (Y_{i})=\left|{\frac {1}{Y_{i}}}\right|}$

As a consequence, the use of the MAPE is very easy in practice, for example using existing libraries for quantile regression allowing weights.

Consistency[]

The use of the MAPE as a loss function for regression analysis is feasible both on a practical point of view and on a theoretical one, since the existence of an optimal model and the consistency of the empirical risk minimization can be proved.^[1]

Alternative definitions[]

Problems can occur when calculating the MAPE value with a series of small denominators. A singularity problem of the form 'one divided by zero' and/or the creation of very large changes in the Absolute Percentage Error, caused by a small deviation in error, can occur.

As an alternative, each actual value (A_t) of the series in the original formula can be replaced by the average of all actual values (Ā_t) of that series. This alternative is still being used for measuring the performance of models that forecast spot electricity prices.^[2]

Note that this is equivalent to dividing the sum of absolute differences by the sum of actual values, and is sometimes referred to as WAPE (weighted absolute percentage error) or wMAPE (weighted mean absolute percentage error).

Issues[]

Although the concept of MAPE sounds very simple and convincing, it has major drawbacks in practical application,^[3] and there are many studies on shortcomings and misleading results from MAPE.^[4][5]

• It cannot be used if there are zero values (which sometimes happens for example in demand data) because there would be a division by zero.
• For forecasts which are too low the percentage error cannot exceed 100%, but for forecasts which are too high there is no upper limit to the percentage error.
• MAPE puts a heavier penalty on negative errors, ${\displaystyle A_{t}<F_{t}}$ than on positive errors.^[6] As a consequence, when MAPE is used to compare the accuracy of prediction methods it is biased in that it will systematically select a method whose forecasts are too low. This little-known but serious issue can be overcome by using an accuracy measure based on the logarithm of the accuracy ratio (the ratio of the predicted to actual value), given by ${\displaystyle \log \left({\frac {\text{predicted}}{\text{actual}}}\right)}$. This approach leads to superior statistical properties and leads to predictions which can be interpreted in terms of the geometric mean.^[3]
• People often think the MAPE will be optimized at the median. But for example, a log normal has a median of ${\displaystyle e^{\mu }}$ where as it is MAPE optimized at ${\displaystyle e^{\mu -\sigma ^{2}}}$.

To overcome these issues with MAPE, there are some other measures proposed in literature:

• Mean Absolute Scaled Error (MASE)
• Symmetric Mean Absolute Percentage Error (sMAPE)
• Mean Directional Accuracy (MDA)
• Mean Arctangent Absolute Percentage Error (MAAPE): MAAPE is a new metric of absolute percentage error, and has been developed through looking at MAPE from a different angle. In essence, MAAPE is a slope as an angle, while MAPE is a slope as a ratio.^[5]

See also[]

• Least absolute deviations
• Mean absolute error
• Mean percentage error
• Symmetric mean absolute percentage error
• WMAPE

External links[]

• Mean Absolute Percentage Error for Regression Models
• Mean Absolute Percentage Error (MAPE)
• Errors on percentage errors - variants of MAPE
• Mean Arctangent Absolute Percentage Error (MAAPE)

References[]