Mercedes-Benz OM636 engine

From Wikipedia, the free encyclopedia
Mercedes-Benz OM636 engine
Mercedes-Benz OM 636.930 07.01.21 JM (1).jpg
Overview
ManufacturerDaimler-Benz AG
Production
  • 1948 (pre-series production)
  • 1949–1990 (series production)
Layout
ConfigurationInline 4
Displacement1,697 cm3 (103.6 in3)
1,767 cm3 (107.8 in3)
Cylinder bore73.5 mm (2.89 in)
75 mm (2.95 in)
Piston stroke100 mm (3.94 in)
Block materialCast iron
Head materialCast iron
ValvetrainOHV
Compression ratio19.0:1
RPM range
Redline3600
Combustion
Operating principleDiesel
Fuel systemPrecombustion chamber injection
Fuel typeGasoil
Oil systemWet sump
Cooling systemWater-cooled
Output
Power output28–32 kW (38–44 PS; 38–43 hp)
Torque output96–101 N⋅m (71–74 lb⋅ft)
Chronology
PredecessorOM 138
SuccessorOM 621

The Mercedes-Benz OM 636 is a diesel engine that has been produced by Daimler-Benz from 1948 until 1990. Being the successor to the OM 138, the OM 636 has been used both as a passenger car engine and as an industrial engine. It saw its first use in the Boehringer Unimog in 1948, prior to its official introduction in the 1949 Mercedes-Benz W 136. Throughout the 1950s, the OM 636 was widely used in the Mercedes-Benz W 120. In 1958, it was succeeded by the OM 621 passenger car engine. However, after the introduction of the OM 621, the OM 636 was kept in production for industrial vehicles such as small lorries, boats, and combine harvesters, until 1990.

The abbreviation OM means Oelmotor (oil engine), and stands for a Daimler-Benz engine that uses any kind of light fuel oil as fuel (diesel engine).

History[]

Daimler-Benz began developing the OM 636 during World War II, and had completed the developing process by 1948. According to Carl-Heinz-Vogler, a former Daimler-Benz engineer, the OM 636 was ready for series production in 1948. The pre-series production units made that year were used in the 1948 Boehringer Unimog.[1]

In 1949, the W 136 was offered with the OM 636 displacing 1.7 L producing 38 PS (28 kW). For a short period of time between January 1952 and August 1953, a facelifted version of the W 136 (now having the chassis code W 191) was sold. Its OM 636 was increased in power by 2 PS. In 1953, the W 120 succeeded the W 191, starting in 1954 it was offered with an upgraded version of the OM 636 now displacing 1.8 L and making 40 PS (29 kW). After the introduction of the W 110 in 1961, the OM 636 was no longer used as a passenger car engine by Daimler-Benz. The production in Germany was stopped in the early 1960s. In Spain, the production continued until 1990.

Technical description[]

The OM 636's Bosch inline injection pump

The OM 636 is a water-cooled inline-four-cylinder diesel engine with precombustion chamber injection, eight valves, OHV valvetrain and wet sump lubrication. It has a cross-flow cylinder head made of grey cast iron. The cylinder block material is also grey cast iron. Both the crankshaft, which is supported in three bearings, and the connection rods are forged. The pistons are made of a light metal alloy. The camshaft is driven by gears, it also drives the inline injection pump. The camshaft and injection pump are placed on the engine's exhaust side.

Technical data[]

Engine code Engine name Bore × Stroke Displacement Compression ratio Rated power (DIN 70020) Torque (DIN 70020) Source
OM 636.915 OM 636 I 73.5 mm × 100 mm (2.89 in × 3.94 in) 1,697 cm3 (103.6 in3) 19.0:1 38 PS (28 kW; 37 hp) at 3200 rpm 9.8 kp⋅m (96 N⋅m; 71 lb⋅ft) at 2000 rpm [2]
OM 636.912 25 PS (18 kW; 25 hp) at 2300 rpm [3]
OM 636.916 OM 636 VI 75 mm × 100 mm (2.95 in × 3.94 in) 1,767 cm3 (107.8 in3) 40 PS (29 kW; 39 hp) at 3200 rpm 10.3 kp⋅m (101 N⋅m; 75 lb⋅ft) at 2000 rpm [4]
OM 636.931 OM 636 VIII [5]
OM 636.930 OM 636 VII [6]
43 PS (32 kW; 42 hp) at 3500 rpm
OM 636.914 OM 636 VI 30 PS (22 kW; 30 hp) at 2550 rpm [3]
32 PS (24 kW; 32 hp) at 2550 rpm
34 PS (25 kW; 34 hp) at 2750 rpm
25 PS (18 kW; 25 hp) at 2300 rpm


See also[]

References[]

  1. ^ Carl-Heinz Vogler: Unimog 411: Typengeschichte und Technik, GeraMond, Munich 2014, ISBN 978-3-86245-605-5, p. 48–49
  2. ^ Daimler AG (ed.): 170 D, in Mercedes-Benz Public Archive, retrieved 8 January 2021
  3. ^ a b Carl-Heinz Vogler: Unimog 411: Typengeschichte und Technik, Geramond, München 2014, ISBN 978-3-86245-605-5, p. 49
  4. ^ Daimler AG (ed.): 170 Db, in Mercedes-Benz Public Archive, retrieved 8 January 2021
  5. ^ Daimler AG (ed.): 170 S-D, in Mercedes-Benz Public Archive, retrieved 8 January 2021
  6. ^ Daimler AG (ed.): 180 D, in Mercedes-Benz Public Archive, retrieved 8 January 2021

Bibliography[]

  • Der 1,8-l-Dieselmotor des Mercedes-Benz 170 Da in: Kraftfahrzeugtechnik 7/1952, p.211-213

External links[]

Retrieved from ""