Mercedes-Benz SK

This article does not cite any sources. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (October 2016) (Learn how and when to remove this template message)

Mercedes-Benz SK
Overview
Manufacturer	Mercedes-Benz
Also called	BeiBen Powerstar (China) SsangYong SY Truck (South Korea)
Production	1989-1998
Layout	cabover truck
Powertrain
Engine	167−393 kW (225−535 PS)
Dimensions
Curb weight	10,000–26,000 kg (22,000–57,300 lb)
Chronology
Predecessor	Mercedes-Benz NG
Successor	Mercedes-Benz Actros

The trucks of the Mercedes-Benz series Schwere Klasse (SK, for "heavy class") were produced from 1989 through 1998, when they were succeeded by the new Mercedes-Benz Actros truck. The Mercedes Benz SK, in essence is basically a revamped Mercedes-Benz NG chassis with a few added driver comforts and electronic assistance and diagnosis. Therefore, it is a much more comfortable ride than its predecessor.

1989[]

Pre-facelift (1989-1994)

The SK series is basically a mere evolution of the Neue Generation, which was built up to the year 1989. There were few changes to the cab: radiator grill and wind leading plates were combined optically, and the lower edges of the side windows were made with a progressive decline towards the front. This design feature had already been realized in 1977 with the T1 and in 1984 with the LN series.

1994[]

Post-facelift (1994–98)

South Korean SsangYong SY Truck based on the Mercedes-Benz SK in Battambang, Cambodia

In 1994 the SK series, which apart from the upgraded engines was still based on the NG series from 1973, was facelifted for the last time with a new front design. The focus was on better aerodynamics which would yield better fuel economy in testing.

Engines[]

The Mercedes Benz SK were available with the ever popular OM44X series engines. Which were an evolution from the highly respected OM42X series used in the predecessor NG chassis. As a result, the OM4XX series share many similar (not to be confused with identical) components which date as far back to the very early Mercedes Benz OM401 and 402 diesel engines.

With the introduction of Euro 1 in 1992, designers and engineers had to find a way to reduce diesel motor emissions over its predecessor. One way this was achieved was by effectively 'de-tuning' the old motor by retarding the ignition timing by several degrees and thus reducing combustion temperatures and NOx emissions. Such de-tuning led to an 10% increase in fuel consumption over earlier model engines.

These new generation OM44X engines, with their robust cast iron blocks, much like their predecessor engines, were specifically very popular in harsh hot desert climates due to their large displacements and low operating temperatures.

The OM44X series engines had various upgrades from the OM42X and OM40X engines. The emphasis on upgrades were to improve cooling of engine components, engine pressure tolerances and tolerate higher engine loads.

Improvements such as:

• Further reinforced cast iron blocks with strengthening at the intermediate walls, housing top and outer walls. Overall an increase of approximately 6 Kgs of reinforcement material over the predecessor block.
• Further improved cylinder heads developed to meet increased operating pressures and temperatures. The cylinder heads have been strengthened at the top sections and have improved exhaust passages, valve seating and nozzle section to match higher pressures. Intake and exhaust valves as well as seat rings have also been redesigned for better gas flow, cooling properties and valve springs improved to deal with higher engine operating pressures.
• Finned air compressor to assist air flow around cylinder liner used in conjunction with coolant of the cylinder and piston.
• Motor oil cooler core with reinforcement to limit thermal expansion and movement.

These engines were initially released as two variants:

(Released from 1989 to 1992)

• OM441 Naturally aspirated V6 engine which yielded approximately 224 hp
• OM442 Naturally aspirated V8 engine which yielded 290 approx 1100NM of torque  hp
• OM442LA twin turbo V8 which yielded between 350hp approx 1650NM of torque (without intercooler) and 500hp.

The later variants (Released from 1992 to 1998) were classed as EURO 1 Emission standard engines.

• OM441 LA Single Turbo V6 engine which yielded 220 hp and up to 340 hp when fitted with an intercooler.
• OM442 LA 14.6 Litre Twin Turbo V8 engine which yielded between 350 hp and up to 530 hp when fitted with an intercooler.

Fuel consumption of the OM442 LA twin turbo V8 is said to be tested at approximately 40L/100km. On comparison, its successor the OM501La of the Mercedes Actros yields fuel economy of 37L/100km.

Transmissions[]

With the introduction of Euro 1 class emission control regulation, it is only understandable that the engines gained a mass disadvantage compared with the earlier models. As the engines were now getting heavier due to Euro 1 class emissions fitting turbos, intercoolers, piping etc. As a result, Mercedes Benz moved away from the ZF branded 16s series Ecosplit cast iron transmissions used in the late model NG chassis and towards a Getrag manufactured aluminium 16 speed synchromesh transmission of models G155 and G180.

The 155 and 180 in the transmission code, much like ZF's designation signifies maximum torque the transmission is rated in NM.

These transmissions were much lighter than the ZF 16s transmissions and could also tolerate a greater range of engine power up to 440 hp thanks mostly to their double clutch pressure plate capability and robust gear design. However a downside was that the Getrag synchronisers where not as robust as the synchronisers of the 16s ZF series.

The transmission was released with one of two versions of gear shift, either the conventional stick shift or the newly developed EPS (Electronic PowerShift) system. The semi automatic transmission was introduced as a means to make driving easier in that the driver required less thinking of rpm matching when approaching steep inclinations.

However, much like most electronic shift mechanisms of that mid to late 1990s era the system did have some mechanical gremlins and reliability issues at times. Although it may have been more comfortable from a drivers point of view, the EPS was not very popular between truck owners and operators, which even led some truck owners sceptical of reliability the later released Actros Telligent transmission.

References[]

Notes[]

Bibliography[]

External links[]

Media related to Mercedes-Benz SK at Wikimedia Commons https://wroom.ru/cars/mercedesbenz/sk