Monnikenburenmolen, Nijhuizum

From Wikipedia, the free encyclopedia
Monnikenburenmolen, Nijhuizum
Spinnekop Nijhuizum
Spinnenkop in 2011
Origin
Mill nameMonnikenburenmolen of Nijhuizumermolen
Mill locationNear Nijhuizum 17, 8775 XD Nijhuizum
Coordinates52°59′10″N 5°29′22″E / 52.98611°N 5.48944°E / 52.98611; 5.48944Coordinates: 52°59′10″N 5°29′22″E / 52.98611°N 5.48944°E / 52.98611; 5.48944
Operator(s)Molenstichting Nijefurd
Year builtbefore 1832, restored 2008
Information
PurposeDrainage mill
TypeHollow post
Roundhouse storeysSingle storey roundhouse
No. of sailsFour sails
Type of sailsCommon sails
WindshaftWood
WindingTailpole and winch
Type of pumpArchimedes' screw

The Monnikenburenmolen or Nijhuizumermolen is a drainage mill in Nijhuizum, Friesland, Netherlands. It was restored in 2008 after it was only just saved from demolishment in 1994.[1] It is a hollow post windmill of a type called "spinnenkop" by the Dutch. The mill is listed as a Rijksmonument, number 527646.[2] It can help drain the polder and has been designated as a backup to the pumping station by the waterboard Wetterskip Fryslân.[2]

History[]

A mill was situated in this location in 1832. Originally it was equipped with a scoop wheel outside the mill. Later this was replaced by an Archimedes' screw. Before 1940 the mill body was removed and the screw was powered by a diesel engine placed in the substructure, which was replaced by an electric motor some time before 1970. In 1994 the remnants of the mill would have been demolished if mill enthusiasts had not prevented it. Molenstichting Nijefurd became owner of the mill in 2003. It was restored to working order in 2008.[1][2]

Description[]

The Monnikenburenmolen or Nijhuizumermolen is what the Dutch describe as a "spinnenkop" (English: spiderhead mill). It is a small hollow post mill winded by a winch. The four common sails have a span of 13.60 metres (44 ft 7 in) and are carried on a wooden windshaft. The brake wheel on the windshaft drives the wallower at the top of the upright shaft in the weatherboarded body, which passed through the main post into the octagonal, thatched substructure. At the bottom of the upright shaft, the crown wheel drives the Archimedes' screw. The screw is 1 metre (3 ft 3 in) in diameter.[1]

Public access[]

The mill is open to the public by appointment on Saturday afternoons.[2] It is easily accessible by a footpath leading to the mill from the public road.

References[]

  1. ^ a b c "Nijhuizum, Fryslân" (in Dutch). Nederlandse Molendatabase. Retrieved 2012-03-22.
  2. ^ a b c d "Molenbestand: De Monnikenburenmolen of Nijhuizumer Molen te Nijhuizum" (in Dutch). De Hollandsche Molen. Archived from the original on 2014-12-31. Retrieved 2012-03-22.
Retrieved from ""