Näcken-class submarine

This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help by introducing citations to additional sources. Find sources:  –  ·  ·  · scholar · JSTOR (October 2017)

HSwMS Neptun
Class overview
Name	Näcken-class
Builders	Kockums
Operators	Swedish Navy  Royal Danish Navy
Preceded by	Sjöormen-class
Succeeded by	Västergötland-class
Planned	3
Completed	3
Laid up	0
Retired	3
Preserved	1
General characteristics
Type	Submarine
Displacement	980 tonnes (960 long tons) surfaced 1,150 tonnes (1,130 long tons) submerged
Length	44 m (144 ft 4 in)
Beam	5.7 m (18 ft 8 in)
Draught	5.5 m (18 ft 1 in)
Propulsion	2 × MTU diesel engines 1 × Jeumont-Schneider electric motor 1 shaft
Speed	20 knots (37 km/h; 23 mph) surfaced 25 knots (46 km/h; 29 mph) submerged
Test depth	150 m (490 ft)
Complement	19 (5 officers)
Sensors and processing systems	FAS
Armament	6 × 533 mm (21 in) torpedo tubes 2 × 400 mm (16 in) torpedo tubes Mines

The Näcken-class submarines, also known as the A14 type, were built for the Swedish Navy in the late 1970s. The boats were authorised in 1972 and the programme was completed in 1980 . All boats were built by Kockums in Karlskrona. The boats had a teardrop hull and diving depth was 150 metres (490 ft). Between 1987 and 1988 Näcken was cut in half and an 8-metre (26 ft) long hull section containing a prototype Air-independent propulsion (AIP) using a closed cycle Stirling engine was installed between the aft battery/propulsion & power control room and the engine/motor room. This technology increased underwater endurance to 14 days and has been adopted in subsequent Swedish submarines.

By the early 2000s the class was decommissioned from the Swedish navy as a result of defence cuts in the year 2000 Defence White Paper. HSwMS Näcken was temporary leased to the Royal Danish Navy but was returned in 2005.

Ships[]

References[]

Notes

Bibliography