Nagamaki

From Wikipedia, the free encyclopedia
Nagamaki, 54 inch koshirae, 52 inch from tsuka to tip, 19.75 inch tang, 26.75 inch tsuka, 24 inch cutting edge

The nagamaki (長巻, "long wrapping") is a type of traditionally made Japanese sword (nihontō)[1][2] with an extra long handle, used by the samurai class of feudal Japan.[3]

History[]

It is possible that nagamaki were first produced during the Heian period (794 to 1185) but there are no known examples dating from before the mid Kamakura period (1192–1333).[4] During the middle of the Muromachi period (1336–1573) the nagamaki reached its peak of usage. It was generally used as a weapon for low-ranking samurai who fought on foot.[5]

The famed warlord Uesugi Kenshin, daimyō of Echigo Province, is said to have had a special guard of retainers armed with nagamaki.[6]

Description[]

The nagamaki was a long sword with a blade that could be 2 feet or more and a handle of about equal length to the blade.[3] The blade was single-edged and it could resemble a naginata blade, but the main difference in how the blades were mounted was that the handle (tsuka) of the nagamaki was not a simple wooden shaft as in the naginata; it was made more like a katana hilt. Even the name "nagamaki" ("long wrapping") is given by the tradition of handle wrapping. The nagamaki's handle was wrapped with leather or silk cords in criss-crossed manner, very similar to that of a katana's. The nagamaki is considered to be evolved from the extremely long ōdachi or nodachi swords that are described in fourteenth century literature and pictorial sources.[3]

The length of blade varies on a nagamaki. However, the nagasa (blade length) most commonly fits the profile of a tachi or katana blade, which would be a blade of more than 2 shaku (2 Shaku = 60.6 cm, roughly 2 feet) in length. While nagamaki means "long wrap", there have been specimens found with no wrapping cord at all, which is very much like a long tachi handle. The tsukamaki (hilt wrap) is of even more importance when applied to the hilt. The cord helps to improve grip on the hilt and also lends structural integrity to the wooden handle. Nagamaki found without hilt wraps usually had at least metal collars around the hilt where the tang is.[citation needed]

There are no solid rules governing the aspects of the make of the nagamaki. Unlike wakizashi, tantō, and katana, which have had history of strict measurements regarding the blade length and even the hilt in some cases; the nagamaki varied in blade length, tang length, kissaki style, etc. Nagamaki presumably could have koshirae in a tachi or katana style as well as a nagamaki style, however there are examples of nagamaki with rather long tangs, which could be fitted with a longer staff for a haft and effectively function as a naginata. Araki-ryū nagamaki is a heavy naginata over eight pounds of weight and eight feet long.[7]

All traditional Japanese swords are fitted very snugly to their hilts and held in place with a mekugi, a bamboo peg which is fit through a hole in the tang called a mekugi-ana. This is actually quite a strong mount when done correctly, and allowed for easy dismount of the bare blade for maintenance or inspection. Katana most commonly had one single pin, and nagamaki commonly have been found with two or more to account for the added leverage of a longer handle.[citation needed]

Use[]

Wielding is very specific; it is held with two hands in a fixed position in the same way a katana is held. Unlike the naginata, the hands do not change when handling the weapon and the right hand was always the closest to the blade. While handling nagamaki fewer sliding actions on the handle are performed than are with the naginata, where the entire length of the shaft is used. The nagamaki is designed for large sweeping and slicing strokes.[8] Traditionally the nagamaki was used as an infantry weapon, frequently used against cavalry.

In fiction[]

  • Sir Alonne, a boss encountered in the Dark Souls II DLC campaign Crown of the Iron King, is a samurai-esque character who wields a nagamaki. He will commit seppuku with the nagamaki should the player defeat him under 5 minutes without taking damage.
  • Lyon, a supporting character in the fifth Suikoden game, wields a nagamaki to protect her charge, the Prince of Falena, who is the protagonist.
  • In The Lord of the Rings films The Fellowship of the Ring and The Two Towers, the Elves are shown using a curved, single-edged sword very similar to the nagamaki, except for a subtle S-shape.
  • Corrupted monk, a boss encountered in the game Sekiro: Shadows Die Twice wields a huge nagamaki and performs elaborate swipe and swing attacks on the player.
  • In Samurai Shodown (2019), newcomer Yashamaru Kurama wields a nagamaki; currently the only character in the series to wield one.

Gallery[]

  • Nagamaki koshirae, 54 in.

  • Nagamaki hilt, 26.75in.

  • Shinto nagamaki tang, 19.75in.

See also[]

Notes[]

  1. ^ The Development of Controversies: From the Early Modern Period to Online Discussion Forums, Volume 91 of Linguistic Insights. Studies in Language and Communication, Author Manouchehr Moshtagh Khorasani, Publisher Peter Lang, 2008, ISBN 978-3-03911-711-6 P.150, ISBN 3-03911-711-4
  2. ^ The Complete Idiot's Guide to World Mythology, Complete Idiot's Guides, Authors Evans Lansing Smith, Nathan Robert Brown, Publisher Penguin, 2008, ISBN 978-1-59257-764-4 P.144, ISBN 1-59257-764-4
  3. ^ Jump up to: a b c Friday 2004, p. 88.
  4. ^ The Connoisseur's Book of Japanese Swords, Author Kōkan Nagayama, Publisher Kodansha International, 1997, ISBN 4-7700-2071-6, ISBN 978-4-7700-2071-0 P.23
  5. ^ Kazuhiko Inada (2020), Encyclopedia of the Japanese Swords. p.35. ISBN 978-4651200408
  6. ^ Amdur 2002, p. 117.
  7. ^ Amdur 2002, p. 121.
  8. ^ Amdur 2002, p. 120.

References[]

  • Amdur, Ellis (2002). Old School, Essays on Japanese Martial Traditions, Edgework
  • Friday, Karl F. (2004). Samurai, Warfare and the State in Early Medieval Japan, Routledge ISBN 0-415-32962-0
  • Knutsen, Roald M. (1963). Japanese Polearms, The Holland Press, London

External links[]

Retrieved from ""