New Mexico State Road 404
![]() | ||||
---|---|---|---|---|
Charles O'Hara Road | ||||
NM 404 highlighted in red | ||||
Route information | ||||
Maintained by NMDOT | ||||
Length | 9.700 mi[1] (15.611 km) | |||
Existed | June 1952[2]–present | |||
Major junctions | ||||
West end | ![]() | |||
![]() | ||||
East end | ![]() | |||
Location | ||||
Counties | Doña Ana | |||
Highway system | ||||
|
New Mexico State Road 404 (NM 404) is a 9.7-mile-long (15.6 km) paved, two-lane state-maintained road in Doña Ana County in the U.S. State of New Mexico, that runs east–west across a gap between the northern edge of the Franklin Mountains and the southern edge of the . The gap is known as the Anthony Gap due to its proximity to the community of Anthony, New Mexico.
The east terminus of NM 404 is its intersection with NM 213 just west of Chaparral, New Mexico. The west terminus is in Anthony, New Mexico where it intersects with NM 460. It intersects Interstate 10.
Route description[]
![]() | This section needs expansion. You can help by . (December 2010) |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/ae/NM404wSignRoadside_%2829963269916%29.jpg/220px-NM404wSignRoadside_%2829963269916%29.jpg)
The highway begins in Anthony at the intersection with NM 460. It continues East and after approximately 0.978 miles (1.574 km)[3] crosses Interstate 10. NM 404 then continues southeast for 3.62 miles at which point it enters Anthony Gap, between the Franklin Mountains and North Franklin Mountains ridges. Passing through the gap, NM 404 turns northeast and goes on for 4.335 miles (6.977 km)[3] until its end at NM 213.
History[]
NM 404 was created in June 1952 by the New Mexico State Highway Commission as Anthony Gap Road. In December 1962, the State Highway Commission passed a resolution changing the road's name to Charles O'Hara Road, after a local prominent businessman from the Anthony area, owner of a large amount of property and also a large local dairy.[2]
The original alignment is between NM 460 and NM 213. During the 1970s, the western terminus shifted westward to NM 478. In the 1980s, the western terminus moved further west to NM 28, but by the 2000s, the western terminus was at its original alignment. The former NM 404 highway between NM 28 and the Rio Grande is now NM 186.[4]
Major intersections[]
The entire route is in Doña Ana County.
Location | mi[3][5] | km | Destinations | Notes | |
---|---|---|---|---|---|
Anthony | 0.0 | 0.0 | ![]() | Western terminus | |
0.8 | 1.3 | Frontage Road 1035 (FR 1035) north – Berino / FR 1043 south – Anthony | Southern terminus of FR 1035; northern terminus of FR 1043 | ||
0.9 | 1.4 | ![]() ![]() ![]() | I-10 Exit 162 | ||
Chaparral | 9.7 | 15.6 | ![]() | Eastern terminus | |
1.000 mi = 1.609 km; 1.000 km = 0.621 mi |
See also[]
U.S. Roads portal
References[]
- ^ "NMDOT State Routes" (PDF). New Mexico Department of Transportation. p. 20. Retrieved 2008-05-15.
- ^ a b "State of New Mexico Memorial Designations & Dedications of Highways, Structures & Buildings" (PDF). New Mexico Department of Transportation. p. 21. Retrieved 2017-10-28.
- ^ a b c "Mile Post Map" (PDF). New Mexico Department of Transportation. p. 1. Retrieved 2010-02-15.[permanent dead link]
- ^ "Details of New Mexico State Routes 401-450". Steve Riner Highways. Retrieved 2010-02-15.
- ^ Google (2010-05-04). "New Mexico State Road 404" (Map). Google Maps. Google. Retrieved 2010-05-04.
External links[]
![]() |
Wikimedia Commons has media related to New Mexico State Road 404. |
Route map:
( • help)
|
Geographic data related to New Mexico State Road 404 at OpenStreetMap
- State highways in New Mexico
- Transportation in Doña Ana County, New Mexico