Nickel electroplating

From Wikipedia, the free encyclopedia

Nickel electroplating is a technique of electroplating a thin layer of nickel onto a metal object. The nickel layer can be decorative, provide corrosion resistance, wear resistance, or used to build up worn or undersized parts for salvage purposes.[1][2]

Overview[]

Nickel electroplating is a process of depositing nickel onto a metal part. Parts to be plated must be clean and free of dirt, corrosion, and defects before plating can begin.[3] To clean and protect the part during the plating process, a combination of heat treating, cleaning, masking, pickling, and etching may be used.[1] Once the piece has been prepared it is immersed into an electrolyte solution and is used as the cathode. The nickel anode is dissolved into the electrolyte to form nickel ions. The ions travel through the solution and deposit on the cathode.[4]

Types and chemistry[]

Watts baths[]

Watts nickel plating baths can deposit both bright and semi-bright nickel. Bright nickel is typically used for decorative purposes and corrosion protection. Semi-bright deposits are used for engineering applications where high corrosion resistance, ductility or electrical conductivity is important, and a high luster is not required.[2][5][6]

Bath composition[]

Chemical Name Formula Bright[5] Semi-bright[5]
Metric US Metric US
Nickel sulfate NiSO4·6H2O 150–300 g/L 20–40 oz/gal 225–300 g/L 30–40 oz/gal
Nickel chloride NiCl2·6H2O 60–150 g/L 8–20 oz/gal 30–45 g/L 4–6 oz/gal
Boric acid H3BO3 37–52 g/L 5–7 oz/gal 37–52 g/L 5–7 oz/gal

Operating conditions [4][]

  • Temperature: 40-65 °C
  • Cathode current density: 2-10 A/dm2
  • pH: 4.7-5.1

Brighteners [4][]

  • Carrier brighteners (e.g. paratoluene sulfonamide, benzene sulphonic acid) in concentration 0.75-23 g/l. Carrier brighteners contain sulfur providing uniform fine grain structure of the nickel plating.
  • Levelers, second class brighteners (e.g. allyl sulfonic acid, formaldehyde chloral hydrate) in concentration 0.0045-0.15 g/l produce (in combination with carrier brighteners) brilliant deposit.
  • Auxiliary brighteners (e.g. sodium allyl sulfonate, pyridinium propyl sulfonate) in concentration 0.075-3.8 g/l.
  • Inorganic brighteners (e.g. cobalt, zinc) in concentration 0.075-3.8 g/l. Inorganic brighteners impart additional lustre to the coating.

Type of the added brighteners and their concentrations determine the deposit appearance: brilliant, bright, semi-bright, satin.

Nickel sulfamate[]

Sulfamate nickel plating is used for many engineering applications. It is deposited for dimensional corrections, abrasion and wear resistance, high efficiency coating and corrosion protection. It is also used as an undercoat for chromium.[2][7]

Bath composition[]

Chemical name Formula Bath concentration[4]
Metric US
Nickel sulfamate Ni(SO3NH2)2 300-450 g/l 40–60 oz/gal
Nickel chloride NiCl2·6H2O 0-30 g/l 0–4 oz/gal
Boric acid H3BO3 30-45 g/l 4–6 oz/gal

Operating conditions[4][]

  • Temperature: 40-60 °C
  • Cathode current density: 2-25 A/dm2
  • pH: 3.5-4.5

All-chloride[]

All-Chloride solutions allow for the deposition of thick nickel coatings. They do this because they run at low voltages. However, the deposition has high internal stresses.[2][4]

Chemical name Formula Bath concentration[4]
Nickel chloride NiCl2·6H2O 30–40 oz/gal
Boric acid H3BO3 4–4.7 oz/gal

Sulfate-chloride[]

A Sulfate-Chloride bath operates at lower voltages than a Watts bath and provide a higher rate of deposition. Although internal stresses are higher than the Watts bath, they are lower than that of an all-chloride bath.[2][4]

Chemical name Formula Bath concentration[4]
Nickel sulfate NiSO4·6H2O 20–30 oz/gal
Nickel chloride NiCl2·6H2O 20–30 oz/gal
Boric acid H3BO3 4–6 oz/gal

All-sulfate[]

An all-sulfate solution is used for electro-depositing nickel where the anodes are insoluble. For example, plating the insides of steel pipes and fittings may require an anode.[2][6]

Chemical name Formula Bath concentration[4]
Nickel sulfate NiSO4·6H2O 30–53 oz/gal
Boric acid H3BO3 4–6 oz/gal

Hard nickel[]

A hard nickel solution is used when a high tensile strength and hardness deposit is required.[2][4]

Chemical name Formula Bath concentration[4] Metric
Nickel sulfate NiSO4·6H2O 24 oz/gal 179.7g/L
Ammonium chloride NH4Cl 3.3 oz/gal 24.7 g/L
Boric acid H3BO3 4 oz/gal 29.96 g/L

Black nickel[]

Black nickel plating is typically plated on brass, bronze, or steel in order to produce a non-reflective surface.[8] This type of plating is used for decorative and military purposes and does not offer much protection.[1][2][8]

Chemical name Formula Bath concentration[8]
Nickel ammonium sulfate NiSO4·(NH4)2SO4·6H2O 8 oz/gal
Zinc sulfate ZnSO4 1.0 oz/gal
Sodium thiocyanate NaCNS 2 oz/gal

Applications[]

Decorative coating[]

Decorative bright nickel is used in a wide range of applications. It offers a high luster finish, corrosion protection, and wear resistance. In the automotive industry bright nickel can be found on bumpers, rims, exhaust pipes and trim. It is also used for bright work on bicycles and motorcycles. Other applications include hand tools and household items such as lighting and plumbing fixtures, wire racks, firearms, and appliances.[5]

Engineering applications[]

Engineering nickel is used where brightness is not desired. Non decorative applications provide wear and corrosion protection as well as low-stress buildups for dimensional recovery.[5][9] The method can be used for making nanocomposite wear resistance coatings.[10][11]

See also[]

References[]

  1. ^ a b c "QQ-N-290 A NICKEL PLATING". www.everyspec.com. Retrieved 2018-02-25.
  2. ^ a b c d e f g h Ian Rose; Clive Whittington (2014). "Nickel Plating Handbook". Nickel Institute.
  3. ^ "MIL-P-27418 PLATING SOFT NICKEL ELECTRO-DEPOSITED BATH". www.everyspec.com. Retrieved 2018-02-25.
  4. ^ a b c d e f g h i j k l "Nickel electroplating [SubsTech]". www.substech.com. Retrieved 2018-02-25.
  5. ^ a b c d e Snyder, Dr. Donald. "Nickel Electroplating". www.pfonline.com. Retrieved 2018-02-25.
  6. ^ a b "NickelElectroplating.pdf" (PDF). Retrieved 25 February 2018.
  7. ^ "We'll find the optimal approach to coating your parts. No one can beat Bales' wide array of engineered coatings and finishes".
  8. ^ a b c "MIL-P-18317 PLATING BLACK NICKEL ON BRASS BRONZE OR". www.everyspec.com. Retrieved 2018-02-25.
  9. ^ Davis, Joseph R. (2000-01-01). Nickel, Cobalt, and Their Alloys. ASM International. ISBN 9780871706850. Retrieved 9 August 2016.
  10. ^ Mosallanejad, M. H.; Shafyei, A.; Akhavan, S. (18 April 2016). "Simultaneous co-deposition of SiC and CNT into the Ni coating". Canadian Metallurgical Quarterly. 55 (2): 147–155. doi:10.1080/00084433.2016.1150406. S2CID 138392838. Retrieved 9 August 2016.
  11. ^ Zhang, Sam (2010-06-18). Nanostructured Thin Films and Coatings: Mechanical Properties. Taylor & Francis. ISBN 9781420094022. Retrieved 9 August 2016.
Retrieved from ""