OpenEVSE
OpenEVSE is an Arduino-based charging station created by Christopher Howell and Sam C. Lin.[1] The charger is composed of open-source software[2] and hardware which can be made DIY.[3]
History[]
The project started in February 2011[4][1] with a simple experiment to try to generate the SAE J1772 pilot signal[5] on an Arduino-compatible ATmega328 8-Bit AVR MCU.[6] One experiment led to another until a prototype J1772-compatible controller was born. What started as six boards built in the first batch turned into many thousands. Today, OpenEVSE powers charging stations from many manufacturers all over the world.[7]
See also[]
- Electric vehicle supply equipment
References[]
- ^ a b OpenEVSE About page
- ^ OpenEVSE at github
- ^ Software and hardware needed to build the OpenEVSE charger
- ^ "Weekend(s) Project - DIY EVSE". My Nissan Leaf Forum. 15 February 2011. Retrieved 2019-09-09.
{{cite web}}: CS1 maint: url-status (link) - ^ "openEVSE | openalia". Retrieved 2019-05-01.
- ^ "MacroFab Podcast - MEP #162: Electric Vehicle Charging and Cat Safety". MacroFab. 2019-03-06. Retrieved 2019-04-11.
- ^ FM, Player. "MEP EP #162: Electric Vehicle Charging And Cat Safety MacroFab Engineering podcast". player.fm. Retrieved 2019-04-11.
External links[]
 | This article about an automotive part or component is a stub. You can help Wikipedia by . |
Categories:
- Embedded operating systems
- Arduino
- Open-source hardware
- Do it yourself
- Electric vehicle infrastructure developers
- Charging stations
- Electric vehicles
- Privately held companies based in California
- Renewable energy organizations based in the United States
- Automotive part stubs