This article has multiple issues. Please help or discuss these issues on the talk page. (Learn how and when to remove these template messages)
This article needs additional citations for verification. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: – ···scholar·JSTOR(February 2018) (Learn how and when to remove this template message)
The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: – ···scholar·JSTOR(February 2018) (Learn how and when to remove this template message)
This article may require cleanup to meet Wikipedia's quality standards. The specific problem is: This article is nearly unintelligible for non-engineers. Can someone with a technical background please translate this into English and add some reliable sources? Apparently it has something to do with metalworking. Please help if you can.(February 2018) (Learn how and when to remove this template message)
(Learn how and when to remove this template message)
A parting line, in industrial casting of molds, is the border line in which draft angles change direction. One can check the parting line in the mould or product which divides the two half, i.e; the core and the cavity of a molded part. It is sometimes a starting point for the mold parting surface. In engineering drawing, a parting line is often abbreviated as PL. ASME's Y14.8 standard specifies a symbol for parting line.[1] Engineering applications (seals, tight running molded parts) that require precision for shape control, call for removal of flashes. Many molders will repair or even replace the mold tooling so that the flash is reduced to an acceptable tolerance or eliminated altogether. Secondary operations to remove parting line flash include hand trimming, vibratory tumbling, media blasting and cryogenic deflashing.[2]