Pegas Arcus
Arcus | |
---|---|
Role | Paraglider |
National origin | Czech Republic |
Manufacturer | Pegas 2000 |
Status | Production completed |
The Pegas Arcus is a Czech single-place paraglider that was designed and produced by Pegas 2000 of Prague. It is now out of production.[1]
Design and development[]
The aircraft was designed as a beginner/intermediate glider. The models are each named for their approximate wing area in square metres.[1]
Variants[]
- Arcus 1 24
- Small-sized model for lighter pilots. Its 10.8 m (35.4 ft) span wing has a wing area of 24.3 m2 (262 sq ft), 34 cells and the aspect ratio is 4.8:1. The pilot weight range is 60 to 75 kg (132 to 165 lb).[1]
- Arcus 1 26
- Mid-sized model for medium-weight pilots. Its 11.5 m (37.7 ft) span wing has a wing area of 26.2 m2 (282 sq ft), 38 cells and the aspect ratio is 5.0:1. The pilot weight range is 75 to 90 kg (165 to 198 lb). The glider model is Swiss SHV Standard certified.[1]
- Arcus 1 30
- Large-sized model for heavier pilots. Its 12.8 m (42.0 ft) span wing has a wing area of 31.5 m2 (339 sq ft), 40 cells and the aspect ratio is 5.2:1. The pilot weight range is 105 to 125 kg (231 to 276 lb).[1]
Specifications (Arcus 1 26)[]
Data from Bertrand[1]
General characteristics
- Crew: one
- Wingspan: 11.5 m (37 ft 9 in)
- Wing area: 26.2 m2 (282 sq ft)
- Aspect ratio: 5.0:1
- Maximum speed: 44 km/h (27 mph, 24 kn)
- Rate of sink: 1.15 m/s (226 ft/min)
References[]
Categories:
- Pegas 2000 aircraft
- Paragliders