Pennsylvania Railroad 1361

From Wikipedia, the free encyclopedia
Pennsylvania Railroad 1361
PRR K4 4-6-2 1361 on display at Horseshoe Curve, PA on February 23, 1969 (25145573673).jpg
PRR No. 1361 on display at Horseshoe Curve before its 1987 restoration
hideType and origin
Power typeSteam
BuilderAltoona Works
Serial number3475
Build dateMay 1918
Rebuild date1985–April 1987
hideSpecifications
Configuration:
​
 • Whyte4-6-2
Gauge4 ft 8+1⁄2 in (1,435 mm)
Leading dia.36 in (914 mm)
Driver dia.80 in (2,032 mm)
Trailing dia.50 in (1,270 mm)
Wheelbase13 ft 10 in (4.2 m) between driving axles
Length83 ft 6 in (25.5 m)
Axle load66,500 lb (30,200 kg; 30.2 t)
Adhesive weight199,500 lb (90,500 kg; 90.5 t)
Loco weight304,500 lb (138,100 kg; 138.1 t)
Tender weight212,725 lb (96,490 kg; 96.490 t)
Total weight517,225 lb (234,609 kg; 234.609 t)
Fuel typeCoal
Fuel capacity22 short tons (20 t)[1]
Water cap11,300 US gallons (43,000 l)[1]
Firebox:
 • Firegrate area		69.89 sq ft (6.49 m2)[2]
Boiler pressure205 psi (1,413 kPa)[2]
Heating surface4,041 square feet (375 m2)[1]
Cylinder size27 in × 28 in (686 mm × 711 mm)[2]
Valve gearWalschaert
Valve typePiston valves
hidePerformance figures
Tractive effort44,460 lbf (197,770 N)[2]
Factor of adh.4.54
hideCareer
OperatorsPennsylvania Railroad
ClassK4s
Numbers
  • PRR 1361
Nicknames"Spirit of Altoona"
DeliveredMay 1918
First runMay 1918
Retired1956 (revenue service)
1988 (1st excursion service)
PreservedJune 8, 1957
RestoredApril 1987 (1st restoration)
202? (2nd restoration)
Current ownerRailroaders Memorial Museum
DispositionUndergoing restoration to operating condition at the Railroaders Memorial Museum, based in Altoona, Pennsylvania

Pennsylvania Railroad 1361 is a 4-6-2 "Pacific" type steam locomotive built in 1918 for the Pennsylvania Railroad by their own Altoona Works. It is one of the only two remaining K4s locomotives and, along with PRR 3750, was designated the official state steam locomotive in 1987 by the Pennsylvania General Assembly.

As a member of the K4s locomotive class, it hauled mainline passenger and mail trains until it was retired from revenue service in 1956. It was restored to operating condition for excursion service in 1987, but mechanical problems sidelined it after only a year and a half of operation. The engine is currently owned by the Railroaders Memorial Museum in Altoona, Pennsylvania, which is currently attempting another restoration for the locomotive back to operating condition.

Background[]

The K4s is considered the Pennsylvania Railroad's most famous class of steam locomotives, with a total of 425 engines produced from 1917 to 1928 and including the prototype that was built in 1914.[3] The last K4s stayed in service until they were replaced by diesel locomotives in the late 1950s.

History[]

No. 1361 at Horseshoe Curve before it was removed for restoration in 1985

1361 was constructed in 1918 by the Altoona Works. It clocked an estimated 2.5 million miles (4.02 million kilometers) over its career.[4]

On June 8, 1957, 1361 was dedicated and placed on exhibit at the famed Horseshoe Curve outside of Altoona, Pennsylvania.

In September 1985, 1361 was moved to the Altoona Works. It was replaced at the curve with the EMD GP9 diesel locomotive 7048, painted in Pennsylvania Railroad colors.

On December 18, 1987, the Pennsylvania General Assembly designated 1361 and 3750 the official state steam locomotives; the same bill designated the GG1 4859 the state electric locomotive.[5]

1361 was restored in April 1987 to haul excursion trains. A year later, however, the main bearing and the drive axle suffered a catastrophic failure, forcing its withdrawal from excursion service.

Restoration efforts[]

1361 was dismantled in 1996 and moved to the Steamtown National Historic Site in Scranton, Pennsylvania. It was to be restored through a partnership between Steamtown, the University of Scranton, and the Railroaders Memorial Museum in Altoona.[4] After an initial grant of $420,000, Governor of Pennsylvania Tom Ridge released an additional $600,000 in March 2000.[4] The restoration was forced to slow exponentially because "every broken pin and bolt had to be replaced with handmade duplicates."[4] Scheduled completion dates kept being pushed back and, after 13 years, the restoration had cost $1.7 million.[1][6]

No. 1361 disassembled at the Railroaders Memorial Museum in 2015.

Most of the smaller components of 1361 were inventoried and returned to Altoona in 2007 when the museum stopped paying out funding until the rest of the locomotive, consisting mostly of the boiler, was returned to the museum.[7]

In April 2010, it was decided to cancel the restoration plans for 1361.[6] Instead of rebuilding it and placing the locomotive back into service as an excursion train, the museum decided on "semi-static display."[6] The museum hoped to still be able to reconstruct the boiler so that it could still be fired and produce enough steam pressure to operate at low speeds around museum property and blow the whistle.[6] However, "semi-static" restoration would also be canceled, but because the boiler would have had to have been rebuilt to current specifications required by the Federal Railroad Administration (FRA), which have drastically changed since the engine was first completed in 1918.

By 2013, the engine had been removed entirely from Scranton, with the frame, tender and various small components stored in Altoona, while the boiler was stored at the East Broad Top Railroad.[8] By early 2015, the museum had completed construction of its "quarter-roundhouse" and began to place the 1361's tender, frame and other components inside.[9] In late July 2015, the 1361's boiler was moved to Altoona and placed in the roundhouse with the remainder of the engine.[10]

In May 2018, 1361 gained another chance to see mainline service again as Bennett Levin and Wick Moorman set up a private restoration fund. Among other things, the locomotive will have PRR-style Timken rolling-element bearings built from designs from the 1940s. It is said that there are several ex-PRR P70 and B60 cars to be used for the train.[11] The engine is currently being worked on by a dedicated team of 4 people. Restoration cost is estimated at $750,000. The locomotive requires boiler patches, firebox patches and a new crown sheet. Then, reassembly can take place. New parts for the 1361 have been fabricated and are ready for installation. As of February 2019, the group was designing a new boiler that would meet current FRA and mechanical engineering standards.[12] In October 2019, the engine's tender neared complete restoration. Trucks were upgraded to roller bearings and its water scoop restored for demonstration purposes.[13][needs update]

On June 24, 2021, the museum announced hiring the contracting firm FMW Solutions to spearhead a final restoration push to completion. Estimates for the final leg of restoration mean a total cost of $2.6 million USD.[14]

References[]

  1. ^ Jump up to: a b c d Kaufman, Dirk W (March 18, 2007). "Altoona awaits refurbished steam locomotive". Pittsburgh Tribune-Review. Retrieved July 27, 2013.
  2. ^ Jump up to: a b c d Stauffer 1962, p. 163.
  3. ^ Stauffer 1962, p. 159.
  4. ^ Jump up to: a b c d Conway, Rachael (July 16, 2000). "Train repair picks up steam". Pittsburgh Post-Gazette. p. B2.
  5. ^ "Act of Dec. 18, 1987, P.L. 421, No. 89 Cl. 71 - OFFICIAL STATE LOCOMOTIVES - DESIGNATION". www.legis.state.pa.us. Retrieved 12 September 2018.
  6. ^ Jump up to: a b c d Kibler, William (April 14, 2010). "Official: Working K-4 plans derailed". Altoona Mirror. Retrieved July 27, 2013.
  7. ^ Kibler, William (May 18, 2008). "K-4 to return — in pieces". Altoona Mirror. Retrieved July 27, 2013.
  8. ^ "RailPictures.Net Photo: PRR 1361 Pennsylvania Railroad Steam 4-6-2 at Rockhill, Pennsylvania by Dennis A. Livesey". www.railpictures.net. Retrieved 12 September 2018.
  9. ^ "Altoona museum moves in to new roundhouse - Trains Magazine". Retrieved 12 September 2018.
  10. ^ "RailPictures.Net Photo: PRR 1361 Pennsylvania Railroad Steam 4-6-2 at Altoona, Pennsylvania by Brandon Fiume". www.railpictures.net. Retrieved 12 September 2018.
  11. ^ "New effort will focus on restoration of famed Pennsylvania Railroad K4s No. 1361 - Trains Magazine". Retrieved 12 September 2018.
  12. ^ Kibler, William (February 3, 2019). "Getting up to steam - Group planning new boiler for K4". Altoona Mirror. Retrieved February 18, 2019.
  13. ^ Schmidt, Brian (15 October 2019). "Pennsylvania tour: PRR 1361". Trains Magazine. Kalmbach Media. Retrieved 25 October 2019.
  14. ^ "Museum Hires Contractor to Lead Pennsylvania K4 Restoration". White River Productions. June 24, 2021.

Sources[]

External links[]

Retrieved from ""