Pindad APS-2
Pindad APS-2 | |
---|---|
Type | APC |
Place of origin | Indonesia |
Service history | |
Used by | Indonesian army |
Production history | |
Designer | PT Pindad |
Manufacturer | PT Pindad |
Unit cost | 600 million rupiah (US$60,000) |
Produced | 2006 |
No. built | Unknown |
Specifications | |
Mass | 12 ton (maximum) |
Crew | 15 men |
Armor | Monocoque body armor, 8-10 mm |
Main armament | 12,7 mm heavy machine gun or 40 mm grenade launcher |
Engine | Renault MIDR 062045 diesel turbo-charged 6 cylinder inline |
Maximum speed | 90 km/hour |
Pindad APS-2 or APS-2 (Angkut Personel Sedang-2; English: Medium Personnel Carrier), also known as APS-1V1[1] is a military armored vehicle made by Pindad, Indonesia. This armored vehicle is the development of prototype APR-1V 4x4 wheel drive run by BPPT and Pindad.[2] The results of this development and refinement resulted in APS-1 with 6x4 and APS-2 6x6 wheel drive, with a chassis derived from Perkasa trucks.[3][4]
History[]
The APS vehicle prototype (also known as APS-1) was built using the Perkasa truck chassis made by the Wahana Perkasa Auto Jaya (PT Texmaco) factory, Subang, West Java. The APS-1 armored vehicle can be loaded with 13 soldiers in which the driver sits in a separate cabin right next to the engine housing. Furthermore, the APS-1 design was again refined by Pindad and BPPT by giving birth to the APS-1 V1 variant (also known as APS-2).[1]
The position of the engine is shifted from the driver's side to the center. This allows the commander and the rider to sit next to each other which can also help increase situational awareness for the driver. At first glance, the APS-2 design resembles the Anoa 6 × 6 armored car. The first appearance of the APS-2 version in public was during the 2006 PTI (Pameran Teknologi & Industri - Technology & Industry Exhibition) at the Plaza Parkir Timur Senayan, 19-22 September 2006.[1]
Previously, it was believed that the Ministry of Defense and Security of the Republic of Indonesia had ordered a total of 150 APS-2 6x6 units. On January 13, 2010, 33 APS-2 armored units were handed over, so the total number of armored vehicles that have been submitted to the Ministry of Defense is 93 out of 150 APS-2 6x6 armored units and 4 reconnaissance units ordered by the Ministry of Defense, while the remaining 61 units are contract value. in the amount of Rp. 473 billion is planned to be completed in 2010. Of the 33 units submitted, 13 units will be used by TNI troops for peacekeeping missions in Lebanon.[5] However, there seems to be a naming error in this order, where the actual order is the APS 6x6 which is Anoa.[6]
See also[]
- VAB
- Pindad
- Pindad APR-1V
- Pindad APS-1
- Pindad APS-3
References[]
- ^ Jump up to: a b c Sawiyya, Rangga Baswara (2019-01-06). "Pindad APS-1, Cikal Bakal Lahirnya Panser Anoa". Airspace Review. Retrieved 2021-04-03.
- ^ "Panser APS-2 Buatan Pindad Siap Melaju". 14 January 2010.
- ^ "PINDAD MEMBUAT PANSER" (in Indonesian). Pikiran Rakyat Online. Retrieved 2011-11-14.
- ^ "BPPT-PINDAD BERENCANA KEMBANGKAN TANK UNTUK KEBUTUHAN TNI" (in Indonesian). Dephan. 2008-10-29. Retrieved 2011-11-14.
- ^ "PT. Pindad (Persero) - PT. PINDAD SERAHKAN 33 UNIT PANSER APS-2 6X6 KE KEMENTERIAN PERTAHANAN". www.pindad.com. Retrieved 2021-04-03.
- ^ "Spesifikasi Panser Pindad yang diminati Malaysia". merdeka.com. 2012-04-17. Retrieved 2021-04-03.
External links[]
- Wheeled armoured personnel carriers
- Post–Cold War military equipment of Indonesia
- Military vehicles introduced in the 2000s
- Six-wheeled vehicles