Podolsko Bridge
This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. (November 2020) |
Podolsko Bridge | |
---|---|
Coordinates | 49°21′26″N 14°16′22″E / 49.35722°N 14.27278°E |
Carries | road |
Crosses | Vltava |
Locale | Podolsko |
Official name | Podolský most |
Characteristics | |
Design | arch bridge |
Total length | 510 metres (1,673 ft) |
Width | 8.5 metres (28 ft) |
Height | 55 |
Longest span | 150 metres (492 ft) |
Clearance below | 49 metres (161 ft) |
History | |
Opened | 1942 |
Statistics | |
Daily traffic | 3896 |
Location | |
The Podolsko Bridge is an arch bridge that spans the Vltava between and in Písek District, Czech Republic. At the time of its completion in 1942, it was the longest arch bridge in Czechoslovakia. In May 1945 during World War II, elements of the U.S. 4th Armored Division took over the western end of the bridge and near by village of Temesvar, marking the farthest point the Western Allied Powers moved East on the Western Front.
Design was by the Ministry of Public Works. Experimental Stress Analysis photoelasticity was by Jaroslav Josef Polívka of the University of California.
After the Orlík Dam was completed in 1961, the Vltava rose 19 meters and covered part of the supports.
References[]
- "Contractor Meets Close Design Tolerances in Building Long-Span Concrete Arch Bridge" J. J. Polivika, Civil Engineering, ASCE American Society of Civil Engineers January 1949
- Philosophy of Structures By Eduardo Torroja [ English Version by J. J. Polivka and Milos Polivka ] (Figure 14:10b, page 221), University of California Press, Berkeley and Los Angeles, inconjuction with Cambridge University Press, 366 pages
Categories:
- Deck arch bridges
- Bridges completed in 1942
- Bridges over the Vltava
- Písek District
- Buildings and structures in the South Bohemian Region
- 1942 establishments in the Protectorate of Bohemia and Moravia