Power-on hours
Power-on hours (POH) is the length of time, usually in hours,[1] that electrical power is applied to a device.
A part of the S.M.A.R.T. attributes (originally known as IntelliSafe, before its introduction to the public domain on 12 May 1995, by the computer hardware and software company Compaq),[2]
It is used to predict drive failure, supported by manufacturers such as Samsung, Seagate, Toshiba, IBM (Hitachi), Fujitsu, Maxtor, Kingston and Western Digital.
Power-on hours is intended to indicate a remaining lifetime prediction for hard drives and solid state drives, generally, "the total expected life-time of a hard disk is 5 years" [3] or 43,800 hours of constant use.[4]
Once a drive has surpassed the 43,800 hour mark, it may no longer be classed as in "perfect condition".
Google tested over 100,000 consumer grade serial and parallel ATA hard disks, finding evidence that S.M.A.R.T. attributes like POH played a heavy role in device failures.[5]
It is primarily used in:
- Mean time between failures (MTBF), and
- S.M.A.R.T., where it is one of the attributes.
References[]
- ^ "ZAR - Quick guide to understanding S.M.A.R.T. information". www.z-a-recovery.com.
...the raw value of the attribute is stored using all sorts of measurement units (hours, half-hours, or ten-minute intervals to name a few) depending on the manufacturer...
- ^ "Wayback Machine" (PDF). 12 June 2001. Archived from the original on 12 June 2001. Retrieved 1 February 2018. Cite uses generic title (help)CS1 maint: bot: original URL status unknown (link)
- ^ "S.M.A.R.T. Attribute: Power-On Hours (POH) | Knowledge Base". kb.acronis.com.
- ^ "Power on time". www.hdsentinel.com.
- ^ Pinheiro, Eduardo; Weber, Wolf-Dietrich; Barroso, Luiz André (2007). "Failure Trends in a Large Disk Drive Population". Cite journal requires
|journal=(help)
 | This electronics-related article is a stub. You can help Wikipedia by . |
- Survival analysis
- Reliability analysis
- Electronics stubs