Problems in coal mining
 | This article has multiple issues. Please help or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
If the coal seam reaches a fault, the seam may be significantly displaced, depending on the type of fault and its offset. Machinery trying to mine the coal may not be able to reach the displaced seam, if the displacement is too large. Coal mines use a combination of boreholes and high-resolution seismic reflection data to identify the larger faults and avoid the most faulted areas at the mine planning stage.[1]
Water table[]
If the water table is too high, the mine will flood with water. While mining, water needs to be constantly pumped out and this is expensive.
Washout[]
If a distributary or river changes course and cuts into the swamp material that will form coal, the coal seam is not fully formed and there may be a problem with mining it[clarification needed].
Thickness of seams[]
If the seams are too thin it may be uneconomic to mine the coal. The cost of production could exceed the selling price.
Splitting of seams[]
If the seam splits, due to a delta collapsing, sand and silt sediments pile up on top until that area is covered. This may make all or part of the coal seam uneconomic to mine as it is too thin.
References[]
- ^ Cocker, J.; Urosevic, M.; Evans, B. (1997). "A High Resolution Seismic Survey to Assist in Mine Planning". In Gubins A.G. (ed.). Proceedings of Exploration 97: Fourth Decennial International Conference on Mineral Exploration (PDF). Decennial Mineral Exploration Conferences, Toronto, Ontario, Canada. pp. 473–476. Archived from the original (PDF) on 2011-07-10. Retrieved 2009-11-17.
 | This article about mining is a stub. You can help Wikipedia by . |
- Coal mining
- Mining stubs