Random modulation

From Wikipedia, the free encyclopedia

In the theories of modulation and of stochastic processes, random modulation is the creation of a new signal from two other signals by the process of quadrature amplitude modulation. In particular, the two signals are considered as being random processes. For applications, the two original signals need have a limited frequency range, and these are used to modulate a third sinusoidal carrier signal whose frequency is above the range of frequencies contained in the original signals.

Details[]

The random modulation procedure starts with two stochastic baseband signals, and , whose frequency spectrum is non-zero only for . It applies to combine these with a carrier frequency (with ) to form the signal given by

where is the equivalent baseband representation of the modulated signal

In the following it is assumed that and are two real jointly wide sense stationary processes. It can be shown[citation needed] that the new signal is wide sense stationary if and only if is circular complex, i.e. if and only if and are such that

Bibliography[]

  • Papoulis, Athanasios; Pillai, S. Unnikrishna (2002). "Random walks and other applications". Probability, random variables and stochastic processes (4th ed.). McGraw-Hill Higher Education. pp. 463–473.
  • Scarano, Gaetano (2009). Segnali, Processi Aleatori, Stima (in Italian). Centro Stampa d'Ateneo.
  • Papoulis, A. (1983). "Random modulation: A review". IEEE Transactions on Acoustics, Speech, and Signal Processing. 31: 96–105. doi:10.1109/TASSP.1983.1164046.


Retrieved from ""