Riegel mine 43
 | This article includes a list of general references, but it remains largely unverified because it lacks sufficient corresponding inline citations. (December 2014) |
The Riegel mine 43 or (Sprengriegel/R.Mi. 43) is a German steel cased anti-tank bar mine used during the Second World War. The mine is a long thin rectangle. It consists of a lower and upper metal tray, and an internal metal-cased explosive block. It uses two ZZ42 fuzes inserted into either end of the internal block, although it can be used with an additional pressure fuze on the top. The mine is similar to the Italian . A variant, the Riegel mine 44 was also produced with a different fuze. Approximately 3,051,400 were produced between 1943 and 1945.
Attempting to disarm Riegelmines is extremely dangerous because the metal wires in the fuze mechanisms quickly become corroded, which makes them highly unstable. As a result, Riegelmines are highly sensitive to the smallest disturbance, and therefore can easily detonate simply by touching them. The situation is further complicated by the fact that Riegel mines can be fitted with up to three anti-handling devices. The recommended render-safe procedure for any Riegel mine is to destroy it in situ by detonating a small explosive charge next to it.
Countries where Riegel mines were laid include the Netherlands, Egypt and Libya.[1]
Specifications[]
- Weight: 9.3 kg (20 lb 8 oz)
- Explosive content: 4 kg (8 lb 13 oz) of TNT
- Length: 80 cm (31 in)
- Width: 95 mm (3.7 in)
- Height: 12 cm (4.7 in)
- Operating pressure: Variable - 360 kg (790 lb) at the center, 180 kg (400 lb) at the ends.
References[]
- Jane's Mines and Mine Clearance 2005-2006
- TM-E 30-451
- ^ Jane's Mines and Mine Clearance 2005-2006
- Anti-tank mines
- World War II weapons of Germany
- Land mines of Germany
- Military equipment introduced in the 1940s