Roosevelt Bridge (Florida)
Roosevelt Bridge | |
|---|---|
 | |
| Coordinates | 27°13′N 80°16′W / 27.21°N 80.26°W |
| Carries |  US 1 |
| Crosses | St. Lucie River |
| Locale | Stuart, Florida |
| Characteristics | |
| Design | segmental bridge |
| History | |
| Construction end | 1996 |
| Location | |
 | |
The Roosevelt Bridge is a major highway segmental bridge across the St. Lucie River in Stuart, Florida. Carrying U.S. Route 1 (Federal Highway; unsigned State Road 5), it was built to supersede the old Roosevelt Bridge, which had twin parallel drawbridges, one for northbound traffic (opened in 1934, 27°12′12″N 80°15′35″W / 27.203228°N 80.259612°W) and the other for southbound (opened in 1964, 27°12′09″N 80°15′35″W / 27.202475°N 80.259762°W). The new bridge, completed in 1996, is raised and much longer than the older twin drawbridges. The southbound span of the old bridge is still functional for road and boat traffic and now carries two-way road traffic for what is now known as Dixie Highway, County Road 707. The new high-level Roosevelt Bridge is approximately one mile long and is made of two three-lane sections running parallel to each other. The northbound bridge was completed first, and housed two lanes of both north and south-bound traffic until the second bridge was finished.[1][2][3][4][5] Because of high traffic volume and visibility, the Roosevelt Bridge is a frequent location for many protests and political campaigning in the area.[citation needed]
Structural damage[]
On June 17, 2020, chunks of concrete fell off the bridge, causing a large crack along the southbound bridge, which put the bridge at risk of an imminent collapse. The entire bridge in both directions was closed later that day. Dixie Highway was also closed. Tolls are being temporarily waived on the Florida's Turnpike from Stuart to Port St. Lucie to help ease traffic congestion during this closure. After severe corrosion & ruptured steel tendons were found on the bridge, Mayor Mike Meier issued a local state of emergency for the city of Stuart "based upon hazardous conditions currently existing with the Roosevelt Bridge. The declaration provides for the performance of public works and taking necessary actions to ensure the health, safety, and welfare of the community."[6] As of July 5th, the northbound bridge, which can carry four lanes of car traffic (two in each direction) with a 5 ton restriction, and Dixie Highway are open.[7] The southbound bridge remains closed. Vehicles over 5 tons are required to use alternate routes.
References[]
- ^ "Bridgepros Roosevelt Bridge Project". Bridgepros. Archived from the original on April 8, 2014. Retrieved 8 October 2014.
- ^ Roosevelt Bridge at Structurae
- ^ "Finley McNary Engineering Project: Roosevelt Bridge".
- ^ "Florida DOT Structural Design of Roosevelt Bridge".
- ^ "Florida DOT Aesthetic Lighting of Roosevelt Bridge".
- ^ "State of emergency issued in Stuart after severe corrosion, ruptured steel tendons found on Roosevelt Bridge". Meghan McRoberts. 18 June 2020. Retrieved June 18, 2020.
- ^ "Roosevelt Bridge updates". Florida Department of Transportation.
Coordinates: 27°12′26″N 80°15′32″W / 27.207198°N 80.258979°W
 | This article about a bridge in Florida is a stub. You can help Wikipedia by . |
- Bascule bridges in the United States
- Transportation buildings and structures in Martin County, Florida
- Bridges completed in 1996
- Road bridges in Florida
- U.S. Route 1
- Bridges of the United States Numbered Highway System
- 1996 establishments in Florida
- Southern United States bridge (structure) stubs
- Florida building and structure stubs
- Florida transportation stubs