S10 (UPU standard)
The UPU S10 standard defines a system for assigning 13-character identifiers to international postal items for the purpose of tracking and tracing them during shipping.
With increased liberalization and the possibility of multiple postal services operating in the same country, the use of country codes to designate the postal service is a problem. To solve this, each country has a designated postal service that controls all S10 identifiers from that country; any competing postal services will have to cooperate with the designated owner. The organization assigned by the UPU member country shall manage the issue and use of S10 identifiers, among all the operators under the authority of that UPU member country, in such a way as to ensure that no S10 identifier is reused within a period of 12 calendar months. A period of 24 calendar months, or longer, is recommended.
Format[]
The identifiers consist of a two letter service indicator code, an eight digit serial number (in the range 00000000 to 99999999), a single check-digit, and a two-letter ISO country code—the latter identifying the issuing postal administration's country.[1]
S10 format | |||
---|---|---|---|
1 | 2 | 3 | 4 |
AA | 00000000 | 9 | BB |
|
Service indicator codes[]
Service codes are generally assigned and administered within each issuing country, but certain types of service and code ranges are used for all countries as listed here.
Code | Interpretation[2] |
---|---|
AV–AZ | domestic, bilateral, multilateral use only, identifying RFID-tracked e-commerce items |
BA–BZ | for domestic, bilateral, multilateral use only |
CA–CZ | Parcel post; the use of CZ requires bilateral agreement. It is not required to use CV for insured parcels but if the service indicator CV is used, then it is recommended that it be used only on insured parcels. |
DA–DZ | for domestic, bilateral, multilateral use only |
EA–EZ | EMS; the use of EX–EZ requires bilateral agreement |
GA | for domestic, bilateral, multilateral use only |
GD | for domestic, bilateral, multilateral use only |
HA–HZ | e-commerce parcels; the use of HX–HY requires multilateral agreement; the use of HZ requires bilateral agreement |
JA–JZ | reserved; cannot be assigned as valid service indicator values |
KA–KZ | reserved; cannot be assigned as valid service indicator values |
LA–LZ | Letter post trackable, several subtypes; the use of LZ requires bilateral agreement |
MA–MZ | Letter post: M bags |
NA–NZ | for domestic, bilateral, multilateral use only |
PA–PZ | for domestic, bilateral, multilateral use only |
QA–QM | Letter post: IBRS (International Business Reply Service) |
RA–RZ | Letter post: registered, but not insured delivery. The use of RZ requires bilateral agreement. |
SA–SZ | reserved; cannot be assigned as valid service indicator values |
TA–TZ | reserved; cannot be assigned as valid service indicator values |
UA–UZ | Letter post: items other than LA–LZ (Express), MA–MZ (M bags), QA–QM (IBRS), RA–RZ (registered), VA–VZ (insured), subject to customs control, i.e. bearing a CN 22 or CN 23 |
VA–VZ | Letter post insured; the use of VZ requires bilateral agreement |
WA–WZ | reserved; cannot be assigned as valid service indicator values |
ZA–ZZ | for domestic, bilateral, multilateral use only |
Check-digit calculation[]
- Ignore the Service Indicator Code and Country Code
- Assign the weights 8, 6, 4, 2, 3, 5, 9, 7 to the 8 digits, from left to right
- Calculate S, the sum of each digit multiplied by its weight.
- For example, for the number 47312482, S = 4*8 + 7*6 + 3*4 + 1*2 + 2*3 + 4*5 + 8*9 + 2*7 = 200
- Calculate the check digit, C, from C = 11 - (S mod 11)
- If C = 10, change to C = 0
- If C = 11, change to C = 5
- For the example 47312482 C = 11 - (200 mod 11) = 11 - 2 = 9.
Python code for check-digit calculation[]
For Python 3.6 or later:
def get_check_digit(num: int) -> int:
"""Get S10 check digit."""
weights = [8, 6, 4, 2, 3, 5, 9, 7]
sum = 0
for i, digit in enumerate(f"{num:08}"):
sum += weights[i] * int(digit)
sum = 11 - (sum % 11)
if sum == 10:
sum = 0
elif sum == 11:
sum = 5
return sum
JavaScript code for check-digit calculation[]
function getCheckDigit(num) {
const weights = [8, 6, 4, 2, 3, 5, 9, 7];
const numArr = Array.from(String(num), Number);
let sum = 0;
numArr.forEach((n, i) => sum = sum + (n * weights[i]));
sum = 11 - (sum % 11);
if (sum == 10) sum = 0;
else if (sum == 11) sum = 5;
return sum;
}
See also[]
- Serial Shipping Container Code, a related standard.
References[]
- ^ "S10 Identification of postal items – 13-character identifier" (PDF). UPU. 2017-10-17. Retrieved 2020-08-21.
- ^ http://www.upu.int, Service Indicator Codes Archived 2010-04-20 at the Wayback Machine
External links[]
- Draft of S10:
- The UPU service indicator code list, list 124
- Online validator for S10 tracking numbers
- Identifiers
- Universal Postal Union
- Standards and measurement stubs