Saboted light armor penetrator
This article needs additional citations for verification. (December 2015) |
The saboted light armor penetrator (SLAP) family of firearm ammunition is designed to penetrate armor more efficiently than standard armor-piercing ammunition. In the US it was developed by the Marine Corps during the mid/late 1980s and was approved for service use in 1990 during Operation Desert Storm. It uses a reduced caliber, heavy metal (tungsten) .30 inch diameter penetrator wrapped in a plastic sabot of .50 inch diameter, and the .308 SLAP round was a .223 inch diameter penetrator core wrapped around the .308 inch plastic sabot.
Design and use[]
The SLAP design incorporates a polymer sabot, which allows for the use of a tungsten penetrator projectile of a lesser diameter than the original bore. By using the casing of a large cartridge with a lightweight projectile, the velocity of the projectile is greatly increased and the sectional density is improved without requiring a (potentially dangerous) increase in chamber pressure.
SLAP rounds have been designed for use against lightly armored vehicles and aircraft.
Saboted ammunition should not be used in firearms with muzzle brakes unless the muzzle brake has been specifically designed for such use.[1] .50 SLAP ammunition is completely interoperable with M2 machine guns with stellite liner.
Types of SLAP ammunition[]
Caliber | Country | Designation | Description |
---|---|---|---|
7.62×51mm NATO | United States | M948 (standard) M959 (tracer) |
Abandoned. Intended for the M60 machine gun, but caused catastrophic barrel failures when tested. Penetration was also subpar.[2] |
7.62×51mm NATO | Sweden | 7,62 mm Sk Ptr 10 PRICK | In use with the Psg 90 sniper rifle. |
.50 BMG (12.7×99mm NATO) | United States | M903 (standard) M962 (tracer) |
For use in M2 machine guns only (the open-tipped round design reduces compatibility). The 355 grains (23.0 g) projectile runs at 4,000 feet per second (1,200 m/s), for a kinetic energy of 25,220 foot-pounds force (34,190 J).[3] |
14.5×114mm | China | DGJ-02 SLAP | Mainly intended for QJG-02. Dual-color tracer. |
Production[]
US SLAP ammunition is produced by the Winchester Cartridge Company and Olin Manufacturing. The team began production of the ammunition in 1985. The sabot that contains the sub-caliber is manufactured by Cytec Industries.
See also[]
- Armour-piercing discarding sabot – the equivalent class of ordnance caliber ammunition.
References[]
- ^ Michaelis, Dean (2000). The Complete .50-Caliber Sniper Course: Hard-Target Interdiction. Paladin Press. p. 411. ISBN 1581600682.
- ^ M962 Saboted Light Armor Penetrator Tracer (SLAPT) Archived 2008-01-29 at the Wayback Machine - Globalsecurity.org
- ^ http://pdf.textfiles.com/manuals/MILITARY/united_states_army_tm_43-0001-27%20-%2029_april_1994.pdf
- Ammunition