Techno-economic assessment

From Wikipedia, the free encyclopedia

Techno-economic assessment or techno-economic analysis (abbreviated TEA) is a method of analyzing the economic performance of an industrial process, product, or service. It typically uses software modeling to estimate capital cost, operating cost, and revenue based on technical and financial input parameters.[1] One desired outcome is to summarize results in a concise and visually coherent form, using visualization tools such as tornado diagrams and sensitivity analysis graphs.

At present, TEA is most commonly used to analyze technologies in the chemical, bioprocess, petroleum, energy, and similar industries. This article focuses on these areas of application.

Use cases[]

TEA can be used for studying new technologies or optimizing existing ones. Ideally, a techno-economic model represents the best current understanding of the system being modeled. The following are examples of typical uses.

  • Evaluating economic feasibility: TEA can be used to anticipate whether a process will be sufficiently profitable under a certain set of assumptions. It can thereby help companies to avoid pursuing dead-ends.
  • Guiding research and development: When combined with sensitivity analyses like Tornado Diagrams, TEA can be used to identify research and development (R&D) targets with the greatest potential to improve profitability. In this way, it can help companies bring their technologies to market more efficiently.
  • Quantifying uncertainty and risk: Sensitivity analyses like Tornado Diagrams and Monte Carlo analysis can be used to quantify economic uncertainty in the model results. They can also be used to identify which variables are the source of the most uncertainty.

Methodology[]

Techno-economic analysis is performed using a techno-economic model. A techno-economic model is an integrated process and cost model. It combines elements of process design, process modeling, equipment sizing, capital cost estimation, and operating cost estimation.

Process design[]

To begin with, the system is defined in the form of a process flow diagram (PFD). A typical PFD shows major equipment and material streams. The term ‘material stream’ refers to liquids, solids, or gases entering or exiting the system, or flowing from one piece of equipment to another.

Process modeling[]

The process model uses engineering and material balance calculations to more fully characterize the system being analyzed. The results are often summarized in the form of a material balance table or stream table, which corresponds to the PFD.

Equipment sizing[]

The output from the process model is used to:

  1. Estimate sizing parameters for each piece of equipment (i.e. one or more parameters that correlate with cost)
  2. Estimate utility requirements for each piece of equipment (i.e. electrical power, fuel, cooling water, etc.)

Capital cost estimation[]

Capital costs are typically estimated using a major equipment factored approach.[2][3] First, the purchase cost for each piece of equipment is estimated from the results of the equipment sizing calculations, often using power law scaling relationships.[4] Next, the balance of the capital costs are estimated by applying multiplying factors based on similar systems.[5]

Operating cost estimation[]

Typical operating costs include raw materials, operating labor, waste treatment, and disposal, utilities, and overhead. Raw material and waste treatment costs are estimated by applying prices to raw material and waste flow rates from the process model. Similarly, utility costs are estimated by applying prices to the utility rates from equipment sizing.[5]

Operating labor can be estimated based on equipment size, quantity, and type. Overhead is typically estimated by applying heuristic factors to capital costs and operating labor.[5]

Cash flow analysis[]

Techno-economic models may also include a discounted cash flow analysis to calculate metrics like net present value and internal rate of return. A cash flow analysis will typically incorporate financial parameters like taxes and discount rates.

Platforms[]

TEA is typically performed using one of two platforms: spreadsheet software, like Microsoft Excel, or a process simulator, like Aspen or SuperPro Designer or an open version based in python BioSTEAM.[6] In general, both platforms use the methodology described above.

Spreadsheet modeling is often preferred for early-stage technologies and startups since it tends to offer greater flexibility, accessibility, and transparency.[1] Process simulators, on the other hand, offer more powerful process simulation capabilities, greater standardization, and integrated cost-estimation modules.

Accuracy[]

Assuming a complete process design, the major equipment factored approach that is often used in TEA has an expected accuracy of -30% to +50%.[3] In the early stages of development, however, the process design is often incomplete or inaccurate, so the error bounds are often considerably larger.

Resources[]

Educational material

Online tools

Guidelines

  • Techno-Economic Assessment Guidelines for CO2 Utilization[7]

References[]

  1. ^ a b Burk, C. (January 2018). "Techno-Economic Modeling for New Technology Development". Chemical Engineering Progress: 43–52.
  2. ^ Perry's chemical engineers' handbook. Robert H. Perry, Don W. Green (8th ed.). New York: McGraw-Hill. 2008. pp. 9–10. ISBN 978-0-07-159313-7. OCLC 194071107.{{cite book}}: CS1 maint: others (link)
  3. ^ a b AACE International (2005). Cost Estimate Classification System – As Applied In Engineering, Procurement, And Construction For The Process Industries; TCM Framework: 7.3 – Cost Estimating and Budgeting. Page 2.
  4. ^ Burk, C. (October 2019). "Applying Scaling Laws in Process Engineering". Chemical Engineering Progress: 52–55.
  5. ^ a b c Peters, Max S. (2003). Plant design and economics for chemical engineers. Klaus D. Timmerhaus, Ronald E. West (5th ed.). New York: McGraw-Hill. p. 273. ISBN 0-07-239266-5. OCLC 50410278.
  6. ^ Cortes-Peña, Yoel; Kumar, Deepak; Singh, Vijay; Guest, Jeremy S. (2020-03-02). "BioSTEAM: A Fast and Flexible Platform for the Design, Simulation, and Techno-Economic Analysis of Biorefineries under Uncertainty". ACS Sustainable Chemistry & Engineering. 8 (8): 3302–3310. doi:10.1021/acssuschemeng.9b07040. ISSN 2168-0485.
  7. ^ Zimmermann, Arno W.; Wunderlich, Johannes; Müller, Leonard; Buchner, Georg A.; Marxen, Annika; Michailos, Stavros; Armstrong, Katy; Naims, Henriette; McCord, Stephen; Styring, Peter; Sick, Volker (2020). "Techno-Economic Assessment Guidelines for CO2 Utilization". Frontiers in Energy Research. 8. doi:10.3389/fenrg.2020.00005. ISSN 2296-598X.
Retrieved from ""