Tetrachloroethylene

From Wikipedia, the free encyclopedia
Tetrachloroethylene
Tetrachloroethylene
Tetrachloroethylene
Names
Preferred IUPAC name
Tetrachloroethene
Other names
Perchloroethene; perchloroethylene; perc; PCE
Identifiers
3D model (JSmol)
1304635
ChEBI
ChEMBL
ChemSpider
ECHA InfoCard 100.004.388 Edit this at Wikidata
EC Number
  • 204-825-9
101142
KEGG
RTECS number
  • KX3850000
UNII
UN number 1897
  • InChI=1S/C2Cl4/c3-1(4)2(5)6 checkY
    Key: CYTYCFOTNPOANT-UHFFFAOYSA-N checkY
  • InChI=1/C2Cl4/c3-1(4)2(5)6
    Key: CYTYCFOTNPOANT-UHFFFAOYAO
  • ClC(Cl)=C(Cl)Cl
Properties
C2Cl4
Molar mass 165.82 g/mol
Appearance Clear, colorless liquid
Odor Mild, chloroform-like[1]
Density 1.622 g/cm3
Melting point −19 °C (−2 °F; 254 K)
Boiling point 121.1 °C (250.0 °F; 394.2 K)
0.15 g/L (25 °C)
Vapor pressure 14 mmHg (20 °C)[1]
−81.6·10−6 cm3/mol
Viscosity 0.89 cP at 25 °C
Hazards
Safety data sheet See: data page
External MSDS
GHS pictograms GHS08: Health hazardGHS09: Environmental hazard
GHS Signal word Warning
GHS hazard statements
H351, H411
P201, P202, P273, P281, P308+313, P391, P405, P501
NFPA 704 (fire diamond)
2
0
0
Flash point Not flammable
Lethal dose or concentration (LD, LC):
LC50 (median concentration)
4000 ppm (rat, 4 hr)
5200 ppm (mouse, 4 hr)
4964 ppm (rat, 8 hr)[2]
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 100 ppm
C 200 ppm (for 5 minutes in any 3-hour period), with a maximum peak of 300 ppm[1]
REL (Recommended)
Ca Minimize workplace exposure concentrations.[1]
IDLH (Immediate danger)
Ca [150 ppm][1]
Related compounds
Related Related organohalides
Tetrabromoethylene
Related compounds
Trichloroethylene
Dichloroethene
Tetrachloroethane
Supplementary data page
Structure and
properties
Refractive index (n),
Dielectric constantr), etc.
Thermodynamic
data
Phase behaviour
solid–liquid–gas
Spectral data
UV, IR, NMR, MS
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N  (what is checkY☒N ?)
Infobox references

Tetrachloroethylene, also known under the systematic name tetrachloroethene, or perchloroethylene, and many other names (and abbreviations such as "perc" or "PERC", and "PCE"), is a chlorocarbon with the formula Cl2C=CCl2. It is a colorless liquid widely used for dry cleaning of fabrics, hence it is sometimes called "dry-cleaning fluid". It also has its uses as an effective automotive brake cleaner. It has a sweet odor detectable by most people at a concentration of 1 part per million (1 ppm). Worldwide production was about 1 million metric tons (980,000 long tons; 1,100,000 short tons) in 1985.[4]

Production[]

British physicist and chemist Michael Faraday first synthesized tetrachloroethylene in 1821 by thermal decomposition of hexachloroethane.

C2Cl6 → C2Cl4 + Cl2

Most tetrachloroethylene is produced by high temperature chlorinolysis of light hydrocarbons. The method is related to Faraday's discovery since hexachloroethane is generated and thermally decomposes.[4] Side products include carbon tetrachloride, hydrogen chloride, and hexachlorobutadiene.

Several other methods have been developed When 1,2-dichloroethane is heated to 400 °C with chlorine, tetrachloroethylene is produced by the chemical reaction:

ClCH2CH2Cl + 3 Cl2 → Cl2C=CCl2 + 4 HCl

This reaction can be catalyzed by a mixture of potassium chloride and aluminium chloride or by activated carbon. Trichloroethylene is a major byproduct, which is separated by distillation.

According to a United States Environmental Protection Agency (EPA) report of 1976, the quantity of tetrachloroethylene produced in the United States in 1973 totaled 320,000 metric tons (706 million lb).[5] By 1993, the volume produced in the United States had dropped to 123,000 metric tons (271 million lb).[6]

Uses[]

Tetrachloroethylene is an excellent solvent for organic materials. Otherwise it is volatile, highly stable, and nonflammable. For these reasons, it is widely used in dry cleaning. It is also used to degrease metal parts in the automotive and other metalworking industries, usually as a mixture with other chlorocarbons. It appears in a few consumer products including paint strippers and spot removers. It is also used in aerosol preparations.

It is used in neutrino detectors where a neutrino interacts with a neutron in the chlorine atom and converts it to a proton to form argon.

Historical applications[]

Tetrachloroethylene was once extensively used as an intermediate in the manufacture of HFC-134a and related refrigerants. In the early 20th century, tetrachloroethene was used for the treatment of hookworm infestation.[7][8]

Health and safety[]

The acute toxicity of tetrachloroethylene "is moderate to low". "Reports of human injury are uncommon despite its wide usage in dry cleaning and degreasing".[9]

The International Agency for Research on Cancer has classified tetrachloroethylene as a Group 2A carcinogen, which means that it is probably carcinogenic to humans.[10] Like many chlorinated hydrocarbons, tetrachloroethylene is a central nervous system depressant and can enter the body through respiratory or dermal exposure.[11] Tetrachloroethylene dissolves fats from the skin, potentially resulting in skin irritation.

Animal studies and a study of 99 twins showed there is a "lot of circumstantial evidence" that exposure to tetrachloroethylene increases the risk of developing Parkinson's disease ninefold. Larger population studies are planned.[12] Also, tetrachloroethylene has been shown to cause liver tumors in mice and kidney tumors in male rats.[13]

At temperatures over 315 °C (599 °F), such as in welding, tetrachloroethylene can be oxidized into phosgene, an extremely poisonous gas.[14][15]

The U.S. National Institute for Occupational Safety and Health has compiled extensive health and safety information for tetrachloroethylene,[16][17] including recommendations for dry cleaning establishments.[18][19][20][21]

Tetrachloroethylene exposure has been linked to pronounced acquired color vision deficiencies after chronic exposure.[22]

Testing for exposure[]

Tetrachloroethylene exposure can be evaluated by a breath test, analogous to breath-alcohol measurements. Because it is stored in the body's fat and slowly released into the bloodstream, tetrachloroethylene can be detected in the breath for weeks following a heavy exposure. Tetrachloroethylene and trichloroacetic acid (TCA), a breakdown product of tetrachloroethylene, can be detected in the blood.

In Europe, the Scientific Committee on Occupational Exposure Limits (SCOEL) recommends for tetrachloroethylene an occupational exposure limit (8 hour time-weighted average) of 20 ppm and a short-term exposure limit (15 min) of 40 ppm.[23]

Environmental contamination[]

Tetrachloroethylene is a problematic soil contaminant because its density causes it to sink below the water table), inhibiting cleanup activities.

Remediation and degradation[]

Estimates state that 85% of tetrachloroethylene produced is released into the atmosphere; while models from OECD assumed that 90% is released into the air and 10% to water. Based on these models, its distribution in the environment is estimated to be in the air (76.39% - 99.69%), water (0.23% - 23.2%), soil (0.06-7%), with the remainder in the sediment and biota. Estimates of lifetime in the atmosphere vary, but a 1987 survey estimated the lifetime in the air to be about 2 months in the Southern Hemisphere and 5–6 months in the Northern Hemisphere. Degradation products observed in a laboratory include phosgene, trichloroacetyl chloride, hydrogen chloride, carbon dioxide, and carbon monoxide. Tetrachloroethylene is degraded by hydrolysis, and is persistent under aerobic conditions. It is degraded by reductive dechlorination under anaerobic conditions, with degradation products such as trichloroethylene, dichloroethylene, vinyl chloride, ethylene, and ethane.[24] It has an ozone depletion potential of 0.005, where CFC-11 (CCl3F) is 1.

In principle, tetrachloroethylene contamination can be remediated by chemical treatment or bioremediation. Bioremediation entails reductive dechlorination by Dehalococcoides sp. under aerobic conditions by cometabolism by Pseudomonas sp.[25][26] Partial degradation daughter products include trichloroethylene, cis-1,2-dichloroethene and vinyl chloride; full degradation converts tetrachloroethylene to ethylene and chloride. Implementation of bioremediation strategies would entail innoculation of contaminated sites.

See also[]

References[]

  1. ^ Jump up to: a b c d e NIOSH Pocket Guide to Chemical Hazards. "#0599". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ "Tetrachloroethylene". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  3. ^ "Compound Summary: Tetrachloroethylene". PubChem. Retrieved 9 September 2020.
  4. ^ Jump up to: a b M. Rossberg et al. "Chlorinated Hydrocarbons" in Ullmann's Encyclopedia of Industrial Chemistry, 2006, Wiley-VCH, Weinheim. doi:10.1002/14356007.a06_233.pub2
  5. ^ "Assessment of Hazardous Waste Practices: Organic Chemicals, Pesticides and Explosives Industries" prebpublication issue for EPA Libraries and Solid Waste Management Agencies under contract # 68-01-2919, USEPA 1976
  6. ^ "Toxicological Profile For Tetrachloroethylene" (PDF). Atlanta, GA: Agency for Toxic Substances and Disease Registry. September 1997. p. 174. Retrieved 2012-09-16. citing C&EN, 1994, Facts and Figures for the Chemical Industry, Chemical and Engineering News, July 4, 1994.
  7. ^ Young, M.D.; et al. (1960). "The Comparative Efficacy of Bephenium Hydroxynaphthoate and Tetrachloroethylene against Hookworm and other Parasites of Man". American Journal of Tropical Medicine and Hygiene. 9 (5): 488–491. doi:10.4269/ajtmh.1960.9.488. PMID 13787477.
  8. ^ "Clinical Aspects and Treatment of the More Common Intestinal Parasites of Man (TB-33)". Veterans Administration Technical Bulletin 1946 & 1947. 10: 1–14. 1948.
  9. ^ E.-L. Dreher; T. R. Torkelson; K. K. Beutel (2011). "Chlorethanes and Chloroethylenes". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.o06_o01. ISBN 978-3527306732.
  10. ^ IARC monograph. Tetrachloroethylene, Vol. 63, p. 159. Last Updated May 20, 1997. Last retrieved June 22, 2007.
  11. ^ Control of Exposure to Perchloroethylene in Commercial Drycleaning Archived September 1, 2009, at the Wayback Machine. Hazard Controls: Publication 97-157. National Institute for Occupational Safety and Health.
  12. ^ "Industrial Solvent Linked to Increased Risk of Parkinson's Disease". Los Angeles Times. February 7, 2010. Archived from the original on March 15, 2010.
  13. ^ "Solvents: the hazardous chemicals to avoid in everyday life - Meds News". Meds News. Retrieved 2016-01-22.
  14. ^ "ATSDR - Medical Management Guidelines (MMGs): Tetrachloroethylene (PERC)".
  15. ^ "OSH Answers:4-Working Safely with Tetrachloroethylene". Government of Canada, Canadian Centre for Occupational Health and Safety. Archived from the original on 2007-07-15. Retrieved 2011-10-13.
  16. ^ "Tetrachloroethylene (perchloroethylene)". CDC / NIOSH Workplace Safety and Health Topic. October 25, 2010. Retrieved 2016-07-15.
  17. ^ "Criteria for a Recommended Standard: Occupational Exposure to Tetrachloroethylene (Perchloroethylene) (76-185)". CDC - NIOSH Publications and Products. June 6, 2014. doi:10.26616/NIOSHPUB76128. Retrieved 2016-07-15.
  18. ^ "Control of Exposure to Perchloroethylene in Commercial Drycleaning (97-154)". CDC - NIOSH Publications and Products. June 6, 2014. doi:10.26616/NIOSHPUB97154. Retrieved 2016-07-15.
  19. ^ "Control of Exposure to Perchloroethylene in Commercial Drycleaning (Substitution) (97-155)". CDC - NIOSH Publications and Products. June 6, 2014. doi:10.26616/NIOSHPUB97155. Retrieved 2016-07-15.
  20. ^ "Control of Exposure to Perchloroethylene in Commercial Drycleaning (Machine Design) (97-156)". CDC - NIOSH Publications and Products. June 6, 2014. doi:10.26616/NIOSHPUB97156. Retrieved 2016-07-15.
  21. ^ "Control of Exposure to Perchloroethylene in Commercial Drycleaning (Ventilation) (97-157)". CDC - NIOSH Publications and Products. June 6, 2014. doi:10.26616/NIOSHPUB97157. Retrieved 2016-07-15.
  22. ^ Iregren, A (Dec 2002). "Color Vision and Occupational Chemical Exposure: An Overview of Tests and Effects". Neurotoxicity. 23 (6): 719–33. doi:10.1016/S0161-813X(02)00088-8. PMID 12520762.
  23. ^ "SCOEL recommendations". 2011-04-22. Retrieved 2011-04-22.
  24. ^ Watts P. (2006). Concise International Chemical Assessment Document 68: TETRACHLOROETHENE, World Health Organization
  25. ^ Ryoo, D., Shim, H., Arenghi, F. L. G., Barbieri, P., Wood T. K. (2001). "Tetrachloroethylene, Trichloroethylene, and Chlorinated Phenols Induce Toluene-o-xylene Monooxoygenase Activity in Pseudomonas Stutzeri OX1". Appl Microbiol Biotechnol. 56 (3–4): 545–549. doi:10.1007/s002530100675. PMID 11549035. S2CID 23770815.CS1 maint: multiple names: authors list (link)
  26. ^ Deckard, L. A., Wills, J. C., Rivers, D. B. (1994). "Evidence for aerobic degradation of tetrachloroethylene by bacterial isolate". Biotechnol. Lett. 16 (11): 1221–1224. doi:10.1007/BF01020855. S2CID 29470943.CS1 maint: multiple names: authors list (link)

Further reading[]

External links[]

Retrieved from ""