Tongue-and-groove pliers
Tongue-and-groove pliers are a type of slip-joint pliers. They are also known as:
- adjustable pliers,
- Channellocks (i.e., Channellock brand pliers),
- water pump pliers,
- groove-joint pliers,
- arc-joint pliers,
- Multi-Grips,
- tap or pipe spanners.
Design[]
They have serrated jaws generally set 45 to 60 degrees from the handles. The lower jaw can be moved to a number of positions by sliding along a tracking section under the upper jaw. An advantage of this design is that the pliers can adjust to a number of sizes without the distance in the handle growing wider. These pliers often have long handles—commonly 9.5 to 12 inches long—for increased leverage.[1][2][3] The weight of the tool can also vary, depending on the material used.
Uses[]
Tongue-and-groove pliers are commonly used for turning and holding nuts and bolts, gripping irregularly shaped objects, and clamping materials. It is also possible to rotate objects while keeping them in one position.[4]
History[]
This design of pliers was invented and popularized by the Champion–DeArment Tool Company in 1934 under the brand name Channellock (after which the company was later renamed)[5] but are also now produced by a number of other manufacturers.
Gallery[]
References[]
 |
Wikimedia Commons has media related to Tongue-and-groove pliers. |
- ^ US 2592927, Manning, Howard H., "Adjustable pliers", published 1952-04-15, assigned to Champion De Arment Tool Co.
- ^ US 4890519, le Duc, Don, "Adjustable pliers", published 1990-01-02
- ^ "Common Maintenance Tools and Their Use: Water-Pump Pliers and Groove-Joint Pliers". Aviation Boatswains Mate E - Aviation theories and other practices. Retrieved 2010-03-29.
- ^ "Types of pliers". Garagehold. 23 September 2019.
- ^ US 1950362, Manning, Howard H., "Tool", published 1934-03-06, assigned to Champion De Arment Tool Co.
- Pliers