Windmill ship

Some of this article's listed sources may not be reliable. Please help this article by looking for better, more reliable sources. Unreliable citations may be challenged or deleted. (August 2012) (Learn how and when to remove this template message)

A windmill ship, wind energy conversion system ship or wind energy harvester ship propels itself by use of a wind turbine to drive a propeller.

They use wind power^[1] through a mechanical or electrical transmission to the propeller. Where transmission is electric, storage batteries may also be used to allow power generated at one time to be used for propulsion later on.

Windmill ships should not be confused with rotor ships, which instead rely on the Magnus effect for propulsion.

Points of sail[]

Because a windmill can rotate 360° into the wind, no matter what direction the ship is facing, a windmill ship can sail in any direction. In fact, because the power produced depends almost entirely on the apparent wind, they can produce the most power sailing directly upwind.^[2][3] Note that sailing upwind, while resulting in more power generation by the wind turbine, requires more power to be expended by the engine and thus it is still more efficient to sail down wind. To sail upwind, a conventional sailing vessel must tack across the wind.

Types[]

Several types can be made; these include wind-turbine-only ships as well as hybrid ships which store wind power from the turbine when the ship does not need to be propelled. To reduce the energy required to propel the boat, windmill ships are often equipped with low-friction hull designs, such as multihulls, or they are hydrofoils. Boats without low-friction hulls or hydrofoils can be equipped with wind turbines, but often the force generated by the turbines alone is not sufficient to propel the craft. In this case, the turbines only provide to conventional sails or other propulsion systems.

At present, research is ongoing and the best types of bladed rotors still need to be determined. For example, high horizontal axis windmills are proven to make the ship less stable. Therefore, vertical axis wind mills (e.g., Savonius turbines) are sometimes preferred.^[4] Also, the wind mill needs to be highly durable as marine environments tend to degrade windmills more quickly than what is common on land.^[5][6]

Current ships[]

Few windmill ships have been built to date; these include:^[7]

• Jim Bates' Te whaka
• Lindsay Olen's Thrippence
• Peter Worsley's windmill-driven boat http://www.sailwings.net/rotaryhome.html
• Jim Wilkinson's Revelation 2^[8]
• Blackbird (wind-powered vehicle)

The film Waterworld starring Kevin Costner featured a trimaran powered by a vertical-axis Darrieus wind turbine.

References[]